• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.95-98
• /
• 2012

There are many high-rise apartment building construction in Korea. There was an accident to pass through worker head by rebar dropped from height place. Therefore, low cost-high effectiveness method to prevent this type of accident should be revised and applied into the construction site. This study is to find out which method could be effectively applied to a site with low cost. Practical field test at 4th floor, 10th floor of apartment building site using re-bar diameter D10, D13, D16, D19, D22 with a length of 1 m, 1.5 m, 2 m, 2.5 m, 3 m which are common by used in a site. The test has also been done with a cover of styrofoam thickness 4.5 cm and thickness 9cm on field drop preventing net. One sheet of styrofoam thickness 45 mm has approximately two times stronger than only prevention net, It is found. Also, Two sheets have approximately two times stronger than one sheet of it.

• Journal of Technologic Dentistry
• /
• v.31 no.2
• /
• pp.31-38
• /
• 2009

In recent year, the population for sports has been increased and lots of wounded patients at the oral & facial portion were troubled with the accidents. So, it was needed to protect them from the sports accident, by the use of the mouthguard appliance. This study was done as ae guide for selection of the mouthguard materials. Such mouthguards classified as E.V.A., PE, silicone as material, Scheu(Germany), Tru-Tain(U.S.A.), Dreve(Germany) as companies, 1.5mm, 3.0mm, and 4.0mm as thickness and single sheet, soft double sheet, hard double sheet methods were selected for experiment to compare the fracture protect test. The obtained results are as follows. 1. All types of mouthguards, whatever differences there are in material, production company, procedure and the thickness, were effective for fracture protect effect. 2. The most effective one for fracture protection was recommended as E.V.A. in material, and Tru-Tain in company. 3. More thick, and soft & hard multi sheets productions were more effective for fracture protection.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.5 s.248
• /
• pp.481-487
• /
• 2006

Spot-welding is a widely used manufacturing method for thin-sheet components, especially in mass-production industries such as the car industry. Automobiles are often constructed by multi-lap spot welding to secure the passenger from the accident, where optimisation of the welding conditions is a major economic consideration. This research is conducted to investigate weldability characteristics with various welding conditions on the 4-lap spot welded joint of structural steel sheets in automobile. The relationship between the tensile-shear strength and the indentation depth has been investigated to propose the optimum welding conditions. The welding current and the welding time have a greater effect on the welding characteristics than the electrode force. It was found that the electrode force has a relatively close relationship with the expulsion occurrence. The design curves for optimum welding are proposed for the 4-lap spot welded joint.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.1
• /
• pp.69-82
• /
• 2004

Recently, in the food, paper, steel and plastic industries, plate or sheet type products have been produced by the rolling drum. Steam heating drums are introduced into plastic products facilities in order to keep the density, microstructure, and strength of material uniformly. The drum journal can not help being concentrated by stresses due to the bending and torsion. Especially the drum, heated by high pressure steam, might be exposed in the steam leakage accident. First of all, the stresses on the steam drum journal are to be analyzed, and a case study proper to the subject was performed with a scraped journal, in order to investigate the failure characteristics as well as the initiation and propagation of fatigue cracks, and most probable circumstances of crack initiation. As the result of this study, it is suggested that newly installed drum journal be thoroughly inspected at the next periodic maintenance intervals for evidence of cracking, the microstructure examination and hardness measurements to prevent steam drum from the failure accident.

• Composites Research
• /
• v.34 no.2
• /
• pp.115-122
• /
• 2021

SMC(Sheet molding compound) composite is mainly used for forming of vehicle's body. Considering the car accident, it is essential to research the impact behavior and characteristics of materials. It is difficult to identify them because the impact process is completed in a short time. Therefore, the impact damage analysis using FE(finite element) model is required for the impact behavior. The impact damage analysis requires the parameters for the damage model of SMC composite. In this paper, ANN(artificial neural network) technique is applied to obtain the parameters for the damage model of SMC composite. The surrogate model by ANN was constructed with the result in LS-DYNA. By comparing the absorption energy in drop weight test with the result of ANN model, the optimized parameters were obtained. The acquired parameters were validated by comparing the results of the experiment, the FE model and the ANN model.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.4
• /
• pp.370-380
• /
• 2009

Reliable hazard and risk communication is needed to prevent the safety accident & occupational disease through right use of chemicals and MSDS(Material Safety Data Sheet) is mainly used as such a tool of communication. MSDS policy has been put into effect in order to prevent the safety accident & occupational disease through right use of chemicals and fulfill workers' right to know. If information on MSDS lacks reliability due to its inaccuracy, prevention of the various effects related with environmental safety & health in advance is not possible to achieve. The most essential thing regarding authoring MSDS is to exactly evaluate the composition and ingredients of the chemical and include reliability-guaranteed information. Therefore, in this study reliability was evaluated on MSDSs in 15 aromatic hydrocarbons(benzene, toluene, xylene, etc.) manufacturers and ways to secure reliability of MSDS were suggested. The results showed 93.5% of composition agreement rate and 89% of reliability on each section in MSDSs. In order to curb MSDSs with low reliability, examination on CBI(confidential business information) in MSDS, certification of MSDS, collection and verification of MSDS are suggested.

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.459-468
• /
• 2018

Deep-sea fishing vessel No. 501 Oryong was fully flooded through its openings and sank to the bottom of the Bering Sea. The tragic accident was attributed to rough sea weather after a fishing operation in the Bering Sea, and led to the death or loss of many crewmen. In this study, the ship stability calculation was carried out using KST-SHIP (ship calculation system of KST), considering the free surface effect and fish catch arrangement according to the progress of its sinking accident, and stability after flooding was analyzed. The calculation results obtained using KST-SHIP were verified by comparing them to intact stability calculation sheet of the accident ship under the full load departure condition, and intact stability according to displacement from the departure of accident ship up to the moment of the accident was calculated and analyzed. The stability after flooding was also calculated and analyzed according to the progress during its sinking accident.

• Journal of the Korean Society of Safety
• /
• v.36 no.4
• /
• pp.71-79
• /
• 2021

In this study, a real-scale fuel-cell room of volume 1.36 m³ is constructed to confirm the explosion characteristics of hydrogen-air mixture gas in a hydrogen-powered house. A volume concentration of 40% is applied in the fuel-cell room as the worst-case scenario to examine the most severe accident possible, and two types of doors (made of plastic sheet and wood) are fabricated to observe their effects on the overpressure and impulse. The peak overpressure and impulse based on distance from the ignition source are experimentally observed and assessed. The maximum and minimum overpressures with a plastic-sheet door are about 20 and 6.7 kPa and those with a wooden door are about 46 and 13 kPa at distances of 1 and 5 m from the ignition source, respectively. The ranges of impulses for distances of 1-5 m from the ignition source are about 82-28 Pa·s with a plastic-sheet door and 101-28 Pa·s with a wooden door. The amount of damage to people, buildings, and property due to the peak overpressure and impulse is presented to determine the safe distance; accordingly, the safe distance to prevent harm to humans is about 5 m based on the 'injuries' class, but the structural damage was not serious.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.3
• /
• pp.365-374
• /
• 2023

Objectives: After the MSDS submission and non-disclosure review system was introduced in January 2021, there were compliance difficulties in the field. Accordingly, for the establishment of the MSDS system, the government intends to investigate what has been improved and what urgently needs to be improved in the future, and to suggest detailed improvement plans. Methods: The background and problems of urgent difficulties in the field handling chemicals were investigated, and realistic improvement plans were derived through review of other laws related to the MSDS system and overseas cases. Results: In order to guarantee the safety of the public while at the same time promoting corporate R&D, it is necessary to alleviate the non-disclosure screening system for chemical substances for R&D, and to improve the irrationality of failing to implement the non-disclosure screening system due to information on unclassified substances being circulated. For this reason, it seems necessary to ease the requirement to submit all ingredients. In addition, it is necessary to strengthen punishment to raise awareness so that health problems do not occur due to the harmfulness and danger of hidden substances among workers who handle chemical substances and downstream users due to false descriptions in MSDS. Conclusions: All members of our society, including chemical manufacturers/importers and handling companies, academia, civil society, and the government, each subject of chemicals, should take an interest in the entire process from production to disposal of chemicals and work together to prevent harm to the public.

• Journal of the Korean Institute of Gas
• /
• v.6 no.4 s.18
• /
• pp.1-7
• /
• 2002

Human errors can take place in all levels that include the design, production, construction, operation and maintenance of plant facilities. It was found that the causes were concerned with the effects of human error. This study verified characteristics of the on-site operators and error mechanism, and used the classifying sheet to analyze human error that occurred in process. Also, by applying the ASEP(Accident Sequence Evaluation Program) HRA(Human Reliability Analysis) procedure, the algorithm to estimate the HEP and the ASEP HEP program to analyze human error in the plant were developed. If it is built in on-site, possible human error incident will be prevented and the systematic human error prevention strategy will be devised.