• Title/Summary/Keyword: access method

Search Result 3,433, Processing Time 0.036 seconds

Effects of Supplementing Different Combinations of Nitrogen Supplements on Digestibility and Performance in Sheep Fed Wheat Straw Diets

  • Li, Yong;Li, Defa;Xing, Jianjun;Li, Shengli;Han, Yang;Han, In K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.15 no.10
    • /
    • pp.1428-1432
    • /
    • 2002
  • Thirty-six (20 wethers and 16 rams) adult Gansu highland finewool sheep with an average liveweight of $19.42{\pm}1.83kg$ were used. The sheep were allocated to 4 treatments and confined in individual feeding stalls. The 80 day feeding trial was divided into 2 periods of 38 and 42 days. The sheep had access to clean water and were fed chopped wheat straw ad libitum. Daily supplemented diets of 150 g for the first period and 200 g for the later period were provided. The 4 types of supplements were: Wheat bran type (I), which is the traditional feeding practice in the area and the control group; Linseed cake type (II); Linseed cake+poultry litter type (III); Poultry litter+distiller grains type (IV). The digestibility trial was conducted using a total collection method at the end of the first period in the feeding trial. The results showed that the digestibilities of DM, OM, CP, CF, NDF and ADF in group II and III were increased to more than 50%. CP and NDF digestibility in group II were significantly increased by 23.6% and 25.5% respectively over group I (p<0.01) and by 10.1% and 13.1% respectively over group III (p<0.05). The digestibility of DM, OM, CP, CF, NDF and ADF in group IV was lower than group I by 4.4 to 8.4% (p>0.05). Compared to group I, group II and III increased straw intake by 17.6% (p<0.01) and 10.8% (p<0.05). The ADG increased from 16.2 g in group I to 45.3 g and 32.8 g (p<0.01) in group II and III respectively. The ratio of supplement intake to gain decreased from 10.7 in group I to 3.9 and 5.4 (p<0.01) in group II and III respectively. The ratio of supplement cost to gain also decreased by 60.0% and 64.3%, respectively. The wool growth rate and wool strength in these 2 groups were noticeably improved. This significantly enhanced the wool's textile value. The above parameters in group IV were lower than in group I, except the ratio of supplement cost to gain. This research indicates that local low quality nitrogen resources could be used effectively and economically to improve the utilization of wheat straw fed to sheep on smallholder farms under harsh loess plateau conditions in the winter.

DRAM Package Substrate Using Aluminum Anodization (알루미늄 양극산화를 사용한 DRAM 패키지 기판)

  • Kim, Moon-Jung
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.47 no.4
    • /
    • pp.69-74
    • /
    • 2010
  • A new package substrate for dynamic random access memory(DRAM) devices has been developed using selective aluminum anodization. Unlike the conventional substrate structure commonly made by laminating epoxy-based core and copper clad, this substrate consists of bottom aluminum, middle anodic aluminum oxide and top copper. Anodization process on the aluminum substrate provides thick aluminum oxide used as a dielectric layer in the package substrate. Placing copper traces on the anodic aluminum oxide layer, the resulting two-layer metal structure is completed in the package substrate. Selective anodization process makes it possible to construct a fully filled via structure. Also, putting vias directly in the bonding pads and the ball pads in the substrate design, via in pad structure is applied in this work. These arrangement of via in pad and two-layer metal structure make routing easier and thus provide more design flexibility. In a substrate design, all signal lines are routed based on the transmission line scheme of finite-width coplanar waveguide or microstrip with a characteristic impedance of about $50{\Omega}$ for better signal transmission. The property and performance of anodic alumina based package substrate such as layer structure, design method, fabrication process and measurement characteristics are investigated in detail.

Reversible Data Hiding and Message Authentication for Medical Images (의료영상을 위한 복원 가능한 정보 은닉 및 메시지 인증)

  • Kim, Cheon-Shik;Yoon, Eun-Jun;Jo, Min-Ho;Hong, You-Sik
    • Journal of the Institute of Electronics Engineers of Korea CI
    • /
    • v.47 no.1
    • /
    • pp.65-72
    • /
    • 2010
  • Nowadays, most hospitals have been used to create MRI or CT and managed them. Doctors depend on fast access to images such as magnetic resonance imaging (MRIs), computerized tomography (CT) scans, and X-rays for accurate diagnoses. Those image data are related privacy of a patient. Therefore, it should be protected from hackers and managed perfectly. In this paper, we propose a data hiding method into MRI or CT related a condition and intervention of a patient, and it is suggested that how to authenticate patient information from an image. In this way, we create hash code using HMAC with patient information, and hash code and patient information is hided into an image. After then, doctor will check authentication using HMAC. In addition, we use a reversible data hiding DE(Difference Expansion) algorithm to hide patient information. This technique is possible to reconstruct the original image with stego image. Therefore, doctor can easily be possible to check condition of a patient. As a consequence of an experiment with MRI image, data hiding, extraction and reconstruct is shown compact performance.

An Efficiency Management Scheme using Big Data of Healthcare Patients using Puzzy AHP (퍼지 AHP를 이용한 헬스케어 환자의 빅 데이터 사용의 효율적 관리 기법)

  • Jeong, Yoon-Su
    • Journal of Digital Convergence
    • /
    • v.13 no.4
    • /
    • pp.227-233
    • /
    • 2015
  • The recent health care is growing rapidly want to receive offers users a variety of medical services, can be exploited easily exposed to a third party information on the role of the patient's hospital staff (doctors, nurses, pharmacists, etc.) depending on the patient clearly may have to be classified. In this paper, in order to ensure safe use by third parties in the health care environment, classify the attributes of patient information and patient privacy protection technique using hierarchical multi-property rights proposed to classify information according to the role of patient hospital officials The. Hospital patients and to prevent the proposed method is represented by a mathematical model, the information (the data consumer, time, sensor, an object, duty, and the delegation circumstances, and so on) the privacy attribute of a patient from being exploited illegally patient information from a third party the prevention of the leakage of the privacy information of the patient in synchronization with the attribute information between the parties.

The consideration of facilities plan and train operating plan for Incheon airport railroad revitalization (인천공항철도 활성화를 위한 시설 및 열차운영방안 고찰)

  • Roh, Byoung-Kuk;Kim, Young-Bea
    • Proceedings of the KSR Conference
    • /
    • 2010.06a
    • /
    • pp.80-97
    • /
    • 2010
  • With the hubbing strategy, construction of "Incheon Airport Railroad(AREX)" was proceeded to expand the accessibility at the level of airports in rivalry like Kansai and Chek Lap Kok. At the present 1st phase which routes from Incheon Airport to Kimpo Airport is opened March 2007. 2nd phase which is planned from Kimpo Airport to Seoul station will be opened at the end of October 2010. But the accessibilty to AREX is delinquent because it is connected only in Seoul station and the maximum operation speed is 110km/h which downgrade the time competitiveness with airport limousine. In addition, transfering of user is necessary to access to AREX from Kyungbu KTX. With these reasons, travel demand in 1st phase section is low(7%). According to reestimation of travel demand, demand analysis result compared with convention condition is insufficient, so required annual average government grant-in-aid amounts to 200 billions won, and it is right time to develop the method for revitalization of Incheon airport railroad. In this paper, facilities plan and operating plan to make new travel demand by speed-up which is able through substitution train now running with high speed train(EMU, 180km/h) and direct connection of KTX, will be suggested. This will contribute to offering high speed railroad service to customers and the reduction of government grant-in-aid by way of demand expansion.

  • PDF

Growth and yield responses of rice varieties to various soil water deficit conditions under different soil types

  • Kikuta, Mayumi;Samejima, Hiroaki;Magoti, Rahab;Kimani, John M.;Yamauchi, Akira;Makihara, Daigo
    • Proceedings of the Korean Society of Crop Science Conference
    • /
    • 2017.06a
    • /
    • pp.322-322
    • /
    • 2017
  • To avoid drought stress under rainfed upland conditions, it is important for rice to efficiently utilize water at shallow soil layers supplied by rainfall, and access to water retained in deer soil layers. The root developmental characteristics of rice, which play important role in the adaptability to drought conditions, vary depending on the variety. Moreover, water availability for plant differs depending on the soil types that have different physical properties such as water holding capacity, permeability, capillary force, penetration resistance, etc. In this study, we evaluated growth and yield responses of rice varieties to various soil water deficit conditions under three different soil types. The experiment was conducted in a plastic greenhouse at the Kenya Agricultural and Livestock Research Organization-Mwea from October 2016 to January 2017. Two upland varieties (NERICA 1 and 4) and one lowland variety (Komboka) were grown in handmade PVC pots (15.2 cm diameter and 85.0 cm height) filled with three different types of soil collected from major rice-growing areas of the country, namely black cotton (BC), red clay (RC), and sandy clay (SC). Three watering methods, 1) supplying water only from the soil surface (W1), 2) supplying water only from the bottom of the pots (W2), and 3) supplying water both from the soil surface and the bottom of pots (W3), were imposed from 40 days after sowing to maturity. Soil water content (SWC) at 20, 40, and 60 cm depths was measured regularly. At the harvesting stage, aboveground and root samples were collected to determine total dry weight (TDW), grain yield, and root length at 0-20, 20-40, 40-60, and 60-80 cm soil layers. Irrespective of the watering methods, the greatest root development was obtained in RC, while that in BC was less than other two soils. In BC, the degree of yield reduction under W1 was less than that in RC and SC, which could be attributed to the higher water holding capacity of BC. In RC, the growth and yield reduction observed in all varieties under W1 was attributed to the severe drought stress. On the other hand, under W2, SWC at the shallow soil depth in RC was maintained because of its higher capillary force compared with BC and SC. As the result, growths and yields in RC were not suppressed under W2. In SC, deep root development was not promoted by W2 irrespective of the varieties, which resulted in significant yield losses. Under W1, the rice growth and yield in SC was decreased although shallow root development was enhanced, and the stomatal conductance was maintained higher than RC. It was suspected that W1 caused nutrients leaching in SC because of its higher permeability. Under rainfed conditions, growth and yield of rice can be strongly affected by soil types because dynamics of soil water conditions change according to soil physical properties.

  • PDF

A comparative study of user interaction when using Online Public Access Catalogs (온라인 열람목록 (OPAC) 이용자의 능력에 관한 비교연구)

  • Park Il-Jong
    • Journal of the Korean Society for Library and Information Science
    • /
    • v.30 no.2
    • /
    • pp.167-188
    • /
    • 1996
  • The lack of an understanding of the characteristics and searching abilities of a specific user group in computer-based information systems in libraries hinders library and information science professionals in making the best decisions when designing, acquiring, and managing information systems. The objective of this study was to provide information on the characteristics and searching abilities of specific groups such as Korean college students & ones who study abroad, male & female, undergraduate & graduate students, etc. This study also has focused on the methods of loaming to use OPACs and non-user study. Questionnaire was administered to both Korean college students in the city of Taegu, Korea and students who study abroad in the state of Texas, US.A. 345 usable questionnaires were obtained and analyzed. These were analyzed using descriptive, inferential statistics, multiple correlation, and SPSS software. The. major findings of this study are: (1) There was a significant difference among specific student user groups except undergraduate and artiste-athlete students in the distribution of their knowledge about how to use OPACs: (2) There was a significant difference among specific groups in the means of their knowledge: (3) There was no significant difference among un. groups in the distribution of loaming method to use OPAC systems : (4) The correlation between the number of searching methods that the respondents knew in using OPACS and the amount of using computers (0.6635) is comparatively higher than my other correlation to the searching methods. Also, years of experience using computers, frequencies of computer use, and frequencies of OPAC use are comparatively higher than frequencies of library use and frequencies of manual card catalog un: (5) Frequencies of manual card catalog use have low negative correlations with the number of searching methods that the respondents knew in using OPACs: (6) Frequencies of manual card catalog use have little if any negative negative with OPAC and computer use. Conclusions are drawn from the findings in this paper, and recommendations an proposed when designing, adopting, or managing a new system. Topics fur future studies on the characteristics of OPAC systems and their use are also suggested.

  • PDF

Development of the Phased Array Ultrasonic Testing Technique for Nuclear Power Plant's Small Bore Piping Socket Weld (원전 소구경 배관 소켓용접부 위상배열 초음파검사 기술 개발)

  • Yoon, Byung-Sik;Kim, Yong-Sik;Lee, Jeong-Seok
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.33 no.4
    • /
    • pp.368-375
    • /
    • 2013
  • Failure of small bore piping welds is a recurring problem at nuclear power plants. And the socket weld cracking in small bore piping has caused unplanned plant shutdowns for repair and high economic impact on the plants. Consequently, early crack detection, including the detection of manufacturing defects, is of the utmost importance. Until now, the surface inspection methods has been applied according to ASME Section XI requirements. But the ultrasonic inspection as a volumetric method is also applying to enforce the inspection requirement. However, the conventional manual ultrasonic inspection techniques are used to detect service induced fatigue cracks. And there was uncertainty on manual ultrasonic inspection because of limited access to the welds and difficulties with contact between the ultrasonic probe and the OD(outer diameter) surface of small bore piping. In this study, phased array ultrasonic inspection technique is applied to increase inspection speed and reliability. To achieve this object, the 3.5 MHz phased array ultrasonic transducer are designed and fabricated. The manually encoded scanner was also developed to enhance contact conditions and maintain constant signal quality. Additionally inspection system is configured and inspection procedure is developed.

The Establishment of an Evaluation Model and Analysis of Perceived Differences between Appraisers for Scenic Roads (경관도로의 평가모형 구축 및 중요도 인식 분석)

  • Kim, Hyeong-Cheol;Jo, Eung-Rae;Jang, Seung-Il
    • Journal of Korean Society of Transportation
    • /
    • v.28 no.4
    • /
    • pp.31-40
    • /
    • 2010
  • The purpose of this study is to formulate an evaluation model and to select evaluation factors for designing scenic roads and designating existing roads as scenic roads. The definition of a "scenic road" contains the purpose not just of travel or access but visiting itself. The value of a scenic road can be enhanced through the preservation of natural environment along the road or the installation of artificial facilities. In order to promote objective scenic road selection and evaluation, the authors used Analytic Hierarchy Process (AHP), which is a multi-criteria decision making method. The weighting value was 0.382 for the value of landscape along the road, 0.154 for the value of landscape in the road, 0.269 for the characteristics of the road, and 0.196 for the management of the road.

Manufacture of Calligraphy-carving Artworks Using Carbonized Board (탄화보드를 이용한 서각작품 제작)

  • Park, Sang-Bum;Chong, Song-Ho;Byeon, Hee-Seop;Ryu, Hyun-Soo
    • Journal of the Korean Wood Science and Technology
    • /
    • v.38 no.3
    • /
    • pp.185-190
    • /
    • 2010
  • This study was focused to make a wooden plate that is engraved with writings or pictures on the medium density fiberboard (MDF), and then to produce a calligraphy-carving artwork by carbonization of the carved MDF. The external appearances and anatomical changes were investigated on the carbonized MDF and aesthetic characteristics was also discussed. No split and no twist were found after the carbonization (at $850^{\circ}C$) of the calligraphy-encarved MDF, shrinkages of the MDF were observed with portions of 21.8% in length, 18.8% in width and 43.5% in thickness, and 69.2% of weight loss with density decrease of 14.8% were observed as well. From the observation of the carbonized board by a scanning electron microscope, specific phenomena were found: the adhesives, surrounding the fiber's surface and pits, were carbonized, the woody fibers were changed smoothly, the pits were opened, the fiber' size was uniformized, and the organization was compacted. By the combination of handmade calligraphy-woodcarving and crack-free carbonizing methods, it was able to find a new method for manufacture carbonized calligraphy-woodcarving artwork. It is concluded that the calligraphy-woodcarving artwork using carbonized board can be a new access for the eco-friendly art that has the advantage of the functionality of charcoal and the aesthetic of calligraphy-woodcarving simultaneously.