• Journal of Korean Society of Transportation
• /
• v.22 no.7 s.78
• /
• pp.139-146
• /
• 2004

Road design should be conformed to the expectancy of drivers. The alignment such as long tangent followed by the sharp horizontal curve should be avoided for the road design consistency. Currently, operating speed profile model is generally used to check the consistency of the successive road alignments. In this model, the hypothesis about the drivers' behaviour on the long tangent followed by the sharp horizontal curve is also included. This study compares the hypothesized drivers' behaviour in the existing operating speed profile model with the actual drivers' behaviour observed at the two lane rural roads. In addition to this, comparison between the acceleration for the vehicles approaching and departing horizontal curves suggested by the foreign research and the value observed at this study was made, From this study, it was concluded that the hypothesis in the existing model was well representing the actual drivers' behaviour. The deceleration for vehicles approaching the horizontal curves was ranged $0.39{\sim}1.06m/s^2$ with the average of $0.66m/s^2$. The average acceleration for the vehicles departing horizontal curves was $0.22m/s^2$.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.4
• /
• pp.81-92
• /
• 2011

In order to understand evaluation of the seismic stability of a fill dam, we made chambers of 1:100, 1:70, and 1:50 (the ratio of the miniature), considering the law of similarity based on drawings of three representative cross sections. And we measured an increase in acceleration, excess pore water pressure, and vertical/horizontal displacement after applying Hachinohe wave (long period), Ofunato wave (short period), and artificial wave, complying with the domestic standards, in order to evaluate the stability and interaction between the ground, the structure, and fluids based on the measurements. As a result, we could observe that displacement of the target cross section was relatively small compared to the allowed level of 30 cm, ensuring proper stability for an earthquake. Regarding the acceleration measurements, the increase rate was 20% for Hachinohe wave and Ofunato wave but 30% for the artificial wave. With respect to the excess pore water pressure, it was lower than 1 (which is the permissible ratio for liquefaction) ensuring proper stability as well.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.4
• /
• pp.49-59
• /
• 2011

In order to understand evaluation of the seismic stability of a reinforced earth retaining, we made chambers of 1:10 (the ratio of the miniature), considering the law of similarity based on drawings of representative cross sections. And we measured an increase in acceleration, earth pressure, and displacement after applying Hachinohe wave (long period), Ofunato wave (short period), and artificial wave, complying with the domestic standards, in order to evaluate the external stability of the reinforced earth retaining wall during earthquake based on the measurements. As a result, the unreinforced earth retaining wall collapsed at 2 g of seismic acceleration. But the reinforced earth retaining wall was evaluated to ensure proper stability as well, with respect to the earth pressure gauge, the increments of earth pressure tend to be raised significantly in the upper than the lower and showed a similar characteristic of behavior in previous theory.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1725-1730
• /
• 2017

The acceleration sensor and the gyroscopic sensor are used as representative sensors to detect repetitive motion and have been used to analyze various sporting components. However, both sensors have problems with noise sensitivity and accumulation of errors. There have been attempts to use two sensors together to overcome hardware problems. The complementary filter has shown successful results in mitigating the problems of both sensors by minimizing the disadvantages of accelerometer and gyroscope sensors and maximizing their advantages. In this paper, we proposed a modified method using neural network to reduce variable. The neural network is an algorithm that can precisely measure even in unexpected environments or situations by pre-learning the number of various cases. The proposed method applies a Neural Network by dividing the repetitive motion into three sections, the first, the middle and the end. As a result, the recognition rate is 96.35%, 98.77%, 96.92% and the accuracy is 97.18%.

• The Journal of Engineering Geology
• /
• v.33 no.4
• /
• pp.657-671
• /
• 2023

As large-scale earthquakes have occurred in Korea and their aftermath continues to be felt, laws and regulations on seismic design have been emphasized, and in Korea, the seismic design standards have been newly revised after the Gyeongju earthquake. In the revised seismic design standards, a stability review for the destruction of the support activity of the breakwater was newly added. Therefore, in this study, we conducted a stability analysis on the seismic reinforcement method for the study site, and checked the ground acceleration of the subgrade and the displacement of the structure over time. As a result of the stability analysis, the safety factor increased by at least 0.5 and up to 1.7. As a result of the time history analysis, the displacement of the superstructure decreased by up to 290 mm and down to 12 mm in both the shallow and deep sections before and after reinforcement, and the ground acceleration decreased by up to 5.33 m/s and down to 0.31 m/s after reinforcement.

• Journal of ILASS-Korea
• /
• v.16 no.2
• /
• pp.82-89
• /
• 2011

When pipe components made of carbon steel in nuclear, fossil, and industry plants are exposed to flowing fluid, wall thinning caused by FAC(flow accelerated corrosion) can be generated and eventually ruptured at the position of pressure boundary. The aim of this study is to identify the locations at which local wall thinning occurs and to determine the turbulence coefficient related to local wall thinning. Experiment and numerical analyses for the tee sections of down scaled piping components were performed and the results were compared. In particular, flow visualization experiment which was used alkali metallic salt was performed to find actual location of local wall thinning inside tee components. In order to determine the relationship between turbulence coefficients and local wall thinning, numerical analyses were performed for tee components in the main feedwater systems. The turbulence coefficients based on the numerical analyses were compared with the local wall thinning based on the measured data. From the comparison of the results, the vertical flow velocity component(Vr) flowing to the wall after separating in the wall due to the geometrical configuration and colliding with the wall directly at an angle of some degree was analogous to the configuration of local wall thinning.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.2
• /
• pp.209-218
• /
• 1995

It is important role that railway speed up plays in realizing an affluent society in future. Curved lines zone have crucial effects on the speed of train travel, at the curved lines zone, it requires to set cant and slack for safety running of train and comfortable ride of passengers, a compromise is therefore to accept a certain degree of cantdeflciencyforthevarioustrain. In this study, it was presented that effective maintenance method according to the investigation of cant value in radius of curvature and analysis safety running of train, calculation of lateral acceleration as cant deficiency, and we obtain the effect of speed up appling route alignment improvement parameter in curved lines zone.

• International Journal of Highway Engineering
• /
• v.19 no.6
• /
• pp.175-182
• /
• 2017

PURPOSES : Road sectors contribute approximately 16 % of total GHG emission rates in South Korea. Engineers and experts expend significant efforts to identify countermeasures for the reduction of carbon emission. This study aims to determine how total carbon emission rates change depending on whether or not there is speed limit enforcement. METHODS : In this study, Lamm's travel speed profile theory is first adopted to select the hazard road, which sections are designated as speed limit enforcement. Second, Motor Vehicle Emission Simulator (MOVES) was used to simulate the carbon emission on the road. RESULTS : The total carbon emission rate under speed limit enforcement was 10,773 g higher than the condition without speed limit enforcement in the designated road. This might affect acceleration, which can lead to increased emissions. CONCLUSIONS : There would be no researches about proving the relationship how speed limit enforcement has an effect on carbon emission. The result of our study can provide valuable guidelines regarding road safety and eco-friendly roads.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.6
• /
• pp.620-627
• /
• 2009

Shaking table test was carried out to obtain dynamic characteristics of TLCDs with uniform and non-uniform sections for both horizontal and vertical tubes. The input to the table is harmonic acceleration with constant magnitude. The output is horizontal dynamic force which is measured by load cell installed below the TLCD. Transfer functions are experimentally obtained using the ratio of input and output. Natural frequency, the most important design factor, is compared to that by theoretical equation for TLCDs with five different water levels. System identification process is performed for experimentally obtained transfer functions to find the dynamic characteristics of head loss coefficient and effective mass of TLCDs. It is found that their magnitudes are larger for a TLCD with non-uniform section than with uniform section and natural frequencies are close to theoretical ones.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2002.05a
• /
• pp.17-25
• /
• 2002

Application of electrical stimulation in the red meat species (eg. beef and sheep) processing has been erratic around the world and this may reflect an incomplete knowledge of how to optimise the technology. Although it is well established that stimulation increases the rate of post-mortem glycolysis other biochemical and biophysical effects have been implicated with the use of this technology. On the basis of currently available knowledge, this mini-review seeks to examine the current theories about the effect of stimulation on post-mortem muscle. The classical view that stimulation prevents muscle from shortening excessively during rigor development has been expanded to include the possibility that it also results in physical disruption of muscle structure. The interaction of these effects with the acceleration of the rate of proteolysis through activation of the calpain protease system has not been comprehensively reviewed in the past. As a result of conclusion driven, this article highlights several areas that may prove fruitful for further research. The challenge for further development of electrical stimulation systems is optimisation of the activation of the enzyme systems in parallel with manipulation of chilling regimes so as to ensure rigor mortis is achieved at temperatures which minimise shortening. The potential of regional stimulation of sections of the carcass to achieve this outcome is worthy of study given the different fibre composition of muscles and temperature gradients.