• Magazine of the Korean Society of Agricultural Engineers
• /
• v.24 no.2
• /
• pp.67-75
• /
• 1982

A study on the effect of water reducing agent on the various characteristics of concrete has been conducted. The experimental results of the study are summarized as follows. 1. Slump test for the concrete added water reducing setretarding agent in proper quantity have been conducted. According to the test results, the decreasing rate of slump value become bigger than plain concrete with increase of the unit weight of cement and elapse of time 2. In case the proper quantity content of maximum compressive strength in Fig. 5 of water reducing set retarding agent is added, unit weight of water is decreased about 15% or so as compared with plain concrete. with the increase of water reducing set accelerating agent content unit weight of water is decreased much more, And other hand, amount of air entraining shows the increasing tendency with the increase of water reducing agent content. 3. The adding rate of water reducing agent which produce maximum strength shows that WR-CH and WR-SA which is water reducing set-starding agent is 0.2% and WR-CO is 0.5% and that WS-PO which is water reducing set accelerating agent is 0.5 4. compressive strength jof the concrete made of sulfate resistant cement shows less than the strength of normal portland cement at initial strength but the strength of both cement shows almost same at curing age of 28 days. 5. when proper quantity of water reducing set retarding agent is used, boned strength is increased about 15% at curing age of 28days. 6. According to the result of durability test, dynamic young's mudulus of elasticity at plain concrete is decreased about 50% as compared with initial step at 300 cycle of freezing and thawing after curing age of days. on the contarary the concrete used water reducing agent is decreased less than 7%.

• Journal of Welding and Joining
• /
• v.15 no.3
• /
• pp.88-98
• /
• 1997

Welding defects, such as porosity and spike, have sometimes occurred in deep penetration electron beam welds. These defects are known to be one of the serious problem in electron beam welds. So, effects of active parameters ($a_b$) on bead shape and occurrence of defects in electron beam welds of heavy section 9%Ni steel plates were investigated. Partial penetration welding in flat position, and deep penetration welding of 10 ~ 28mm depth were investigated in this study. It is desirable to select low accelerating voltage and above the surface focus position $a_b$$\geq$1.2 at which a wine-cup shaped bead is obtained to avoid the welding defects such as spike and root porosity. When the accelerating voltage of electron beam was low (90kV), active parameter ($a_b$) did not influence on the bead width, penetration depth and weld defects significantly. However, in case of high voltage ($\geq$120kV), active parameter ($a_b$) was sensitively associated with penetraton depth and weld defects, i.e. when the active parameter (($a_b$) was in the range of 0.6 to 1.0, the depth of penetration was always over the target (23mm), while the depth of penetration was dramatically decreased with further increase of active parameter ($a_b$). The weld defects were decreased with the increase of active parameter $a_b$ resulting in the decrease of energy density of the focused beam in the root part of fusion zone.

• Analytical Science and Technology
• /
• v.14 no.3
• /
• pp.203-211
• /
• 2001

In this paper it was described on the intereference effect of uranium to analyze Cs in $UO_2$ by Electron Probe Micro Analysis(EPMA) and the beam stability of Cs $L_{\alpha}$ X-ray intensity for some Cs compounds. According to the experimental results, the CsI showed the highest $L_{\alpha}$ X-ray intensity among the tested Cs compounds at the experimental condition; 15~30 kV of accelerating voltage and PET, LiF crystal. When 100 nA of beam current was applied to Cs compounds, Cs $L_{\alpha}$ X-ray intensity was continuously decreased with increasing time. The decreasing rate of Cs $L_{\alpha}$ X-ray intensity was directly proportional to the applied beam current and accelerating voltage but inversely proportional to the applied beam size. It was found that uranium interference can be prevented by using Cs $L_{\alpha}$ X-ray wavelength of Lif crytal for Cs analysis in $UO_2$ by EPMA.

• Journal of Environmental Science International
• /
• v.33 no.2
• /
• pp.131-138
• /
• 2024

The effect of magnetite particles on the anaerobic digestion (AD) of furfural wastewater was investigated using sequential anaerobic batch tests. The batch tests with four 500 mL anaerobic bioreactors were performed under two conditions: FC treatment for AD of furfural without magnetite particles, and FM treatment for AD of furfural with magnetite particles. The FC bioreactors showed a decreasing methane production rate (MPR) across the sequential batches, with a final batch MPR of 11.3 ± 0.4 mL CH₄/L/d, indicating the need for a methanogenesis enhancer to achieve high-rate AD of furfural. Conversely, FM bioreactors exhibited significantly higher MPR, exceeding FC values by 4-196%, with a final batch MPR of 33.5 ± 0.1 mL CH₄/L/d, which was about three times higher than FC. Additionally, FM bioreactors had faster degradation rates of furfural, valeric acid, and acetic acid compared to FC, with values exceeding those in PC by 3.0, 1.14, and 2.8 times, respectively. These results demonstrate that magnetite particles can enhance the AD of furfural not only by accelerating methanogenesis but also by accelerating the anaerobic degradation of furfural and its intermediates, such as volatile fatty acids. This study provides valuable insights for developing high-rate AD systems for furfural wastewater treatment.

• Journal of Ginseng Research
• /
• v.22 no.1
• /
• pp.1-10
• /
• 1998

In the present study, to determine whether the antioxidative components of Korean red ginseng protect against radiation damage and the possible relationship among the radioprotective effects and antioxidant actions, the effects of total saponin (200 mg/kg, ip) and lipophilic fraction (200 mg/kg, oral) preferment of mice on the survival ratio, major antioxidant enzymes (SOD, catalase and glutathione peroxidase) activities, glutathione levels and lipid peroxidation in the liver were exiled for 2 weeks after whole ${\gamma}$-body ${\gamma}$-irradiation (6.5 Gy). The 30-day survival ratio increased from 10% to 57% and 40% for mice treated with total saponin and lipophilic fraction, respectively. On day 14 after ${\gamma}$-irradiation, the ginseng total saponin pretreatment produced a slight increase of antioxidant enzymes activities and significantly Increased reduced glutathione (GSH) contents (p<0.05) in the liver compared with non-treated group. Pretreatment with ginseng total saponin significantly deceased GSSG/total GSH ratio (p<0.05) without change of GSSG in the liver and inhibited the radiation-induced incense in the hepatic malondialdehyde levels. (p<0.05) In these results, GSH plays an important role in the liver in several detoxifications and the reduction of lipid peroxides. Thus, it appears that total saponin of red ginseng exerts its radioprotective effect by accelerating the production of endogenous antioxidants, such as glutathione from radiation induced damages and thereby oxygen free radicals.

• Biomolecules & Therapeutics
• /
• v.11 no.4
• /
• pp.238-244
• /
• 2003

Nicotine is one of the major hazardous components in cigarettc smoke. Nicotine deals a harmful effect to smokers and passive smokers due to its rapid conversion to various carcinogenic metabolites. Nitrosamine-4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK) is believed to cause lung cancers among the nicotine-derived carcinogens. Recent studies report that NNK synthesis can be inhibited by the metabolism pathway to produce a stable metabolite cotinine from nicotine. Tea polyphenols have been known to contain factors to prevent cancers and to retard progression of cancers. This study aims to correlate tea polyphenol's potential for cancer prevention with an accelerated formation of cotinine. The conversion from nicotine to cotinine in the presence of tea extracts or three polyphenols (Catechin, epicatechin gallate, epigallocatechin gallate) was measured in established cell lines and in Xenopus oocytes. Among three lines of cell used, PLC/PRF5 and HEK293 cells showed a fast turnover from nicotine to cotinine while HepG2 cell line showed a marginal difference between groups treated and non-treated with tea polyphenols. When Xenopus oocytes were microinjected with nicotine, tea polyphenols appear to accelerate the conversion of nicotine to cotinine. Among the polyphenols tested in this study, (＋)－catechin showed the best efficiency overall in accelerating conversion from nicotine to cotinine both in the cell lines and in the oocytes. In summary, the present study indicated that tea polyphenols have a positive effect on conversion of nicotine to cotinine.

• Korean Journal of Remote Sensing
• /
• v.38 no.1
• /
• pp.127-137
• /
• 2022

Urban Heat Island (UHI) effect has been widely studied as a global concern of the 21st century. Heat generation from urban built-up structures and anthropogenic heat sources are the main factors to create UHIs. Unfortunately, both factors are expanding rapidly in Lahore and accelerating UHI effects. The effects of UHI are expanding with the expansion of impermeable surfaces towards urban green areas. Therefore, this study was arranged to analyze the role of urban cooling intensity in reducing urban heat island effects. For this purpose, 15 parks were selected to analyze their effects on the land surface temperature (LST) of Lahore. The study obtained two images of Landsat-8 based on seasons: the first of June-2018 for summer and the second of November-2018 for winter. The LST of the study area was calculated using the radiative transfer equation (RTE) method. The results show that the theme parks have the largest cooling effect while the linear parks have the lowest. The mean park LST and PCI of the samples are also positively correlated with the fractional vegetation cover (FVC) and normalized difference water index (NDWI). So, it is concluded that urban parks play a positive role in reducing and mitigating LST and UHI effects. Therefore, it is suggested that the increase of vegetation cover should be used to develop impervious surfaces and sustainable landscape planning.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.1
• /
• pp.119-129
• /
• 2018

Companies' efforts to secure and sustain a competitive advantage in the market may also appear in the form of new product development. This has increased the importance of leveraging knowledge from other companies in a global competition that is accelerating with an accelerating product life cycle and the development of transportation and communications. In order to create valuable knowledge through the exchange and combination of knowledge, the absorptive capacity of the recipient of the knowledge should be considered as important, but also the knowledge protection tendency, which is characteristic of the knowledge transferor, should be considered. However, studies that considered these factors at the same time were very limited. This study examines the effect of suppliers 'absorptive capacity and buyer' s knowledge protection on new product development performance during the joint development of new products. In addition, we investigated the interaction effect between supplier's absorption capacity and buyer's knowledge protection tendency. For this purpose, data were collected for automobile industry, electronics industry and defense industry, where joint development of new products occurred frequently, and statistical verification was performed by regression analysis. The results showed that the absorptive capacity of the supplier was positively correlated with the performance of the new product development, and the buyer 's knowledge protection tendency had a negative relationship with the new product development performance. In addition, the absorptive capacity of the supplier and the buyer 's knowledge protection tendency have an interaction effect on the new product development result. These results suggest that suppliers' absorption capacity is an important factor in the joint development of new products, but suppliers with superior absorption capacity may have a negative impact on new product development performance if buyers have a negative attitude toward knowledge transfer.

• Journal of the Korea Concrete Institute
• /
• v.28 no.3
• /
• pp.309-316
• /
• 2016

In this study, performance of hardening accelerator types which promote setting and hardening of cement has been reviewed in order to develop early age strength of concrete with compressive strength of 21~27 MPa after examination of strength development of the concrete at early age according to curing temperature and unit cement(binder) content. As results, soluble mineral salt showed better hardening acceleration effect than organic salt in the scope of this study. Also, hydration reaction accelerating effect of $C_3S$ by Soluble mineral salt is effective on development of early age compressive strength and it was shown that the Pt's hydration reaction accelerating effect was the best. Construction duration reduction can be expected by securing compressive strength for prevention of early aged freezing damage in 25hour-curing time under curing temperature at $15^{\circ}C$. Also, it was shown that compressive strength of specimen cured at $5^{\circ}C$ was similar with plain specimen cured at $10^{\circ}C$. Therefore, it is expected that fuel costs and carbon dioxide can be reduced when the same construction duration is considered.

• Journal of Korea Foundry Society
• /
• v.24 no.4
• /
• pp.202-208
• /
• 2004

Effects of Co addition on sliding wear properties of multi-component white cast iron were investigated. The microstructures of multi-component white cast iron containing from 0%Co to 10%Co exhibited little difference. However, the hardness increased with an increase of the Co content. Increasing the Co content, wear properties were improved and the iron oxide on worn surface was increased in the low sliding speed range of the steady-state wear region. Hence, Co addition was effective to improve the wear properties of multi-component white cast iron by accelerating the corrosive wear as well as the enhancement effect of hardness.