• Journal of the Korean Society for Library and Information Science
• /
• v.21
• /
• pp.61-101
• /
• 1991

This study reviews the development and change of main entry principle in German cataloging codes, with special emphasis on RAK. With rerard to the functions of catalog, comparison between the traditional title main entry in the Orient and author main entry in the West has been made. The analysis confirms in this study that various criteria in choice of the entries in RAK have been adopted. In case of works where the persons who have played different roles in the works are named on the title page, as well as related works and works of mixed responsibility, the criteria of entry determination are complex and time consuming process and have no absolute value. And there are also various kinds of problems in corporate entries including confirmation of originator(Urheber), choice of either the territorial authority corncerned or corporate bodies as an entry depending on the nature of the publications, and a unique bibliographical situation of treaties. This means the code is absence of absolute value in selecting entries, and this results in adoption of main entry principle which has lost its significance for the purpose of cataloging. With emergence of the ISBD and actualization of automated cataloging, morever, all entries are equal as points of access. It would eliminate the need for personal judgements required in choice of main entry by the present code. In doing so, it would bring uniformity and standardization to cataloging practice. In direct approach to works, title entry is more developed finding device than author entry in cataloging theories. Thus introduction of unit card system beginning with title which is adopted in KCR3 would be desirable, the complicated rules for the choice of entry could be abandoned from cataloging codes. Most of the user studies show that catalog users have placed higher value on the title entry as a finding device and each entry is equal as access points through unit entry. This means that choice of a given entry as a main entry is unnecessary in cataloging codes. Title entry would be a rather simple standard and direct approach for works. This study proves that the traditional title entry of Korea is superior to author main entry in the Western world in cataloging theory. Thus recommendation to be made is that abandonment of author main entry from cataloging codes should be considered in the future.

• Kyungpook Mathematical Journal
• /
• v.59 no.2
• /
• pp.335-340
• /
• 2019

The energy of a graph G is the sum of the absolute values of the eigenvalues of the adjacency matrix of G. Some variants of energy can also be found in the literature, in which the energy is defined for the Laplacian matrix, Distance matrix, Commonneighbourhood matrix or Seidel matrix. The Seidel matrix of the graph G is the square matrix in which $ij^{th}$ entry is -1 or 1, if the vertices $v_i$ and $v_j$ are adjacent or non-adjacent respectively, and is 0, if $v_i=v_j$. The Seidel energy of G is the sum of the absolute values of the eigenvalues of its Seidel matrix. We present here some families of pairs of graphs whose Seidel matrices have different eigenvalues, but who have the same Seidel energies.

• International Area Studies Review
• /
• v.14 no.3
• /
• pp.290-311
• /
• 2010

This study aimed at exploring the primary motivations in the behavior of MNCs' setting up R&D Labs in China, four main subjective motivations were founded. R&D Labs consisted of the following four types: local market support Labs, local technology support Labs, global technology center, and internationally interdependent Labs.he choices of the R&D Lab type features are different because of the various R&D investment motivations. Provided that MNCs' investment motivations in China are in order to obtain Chinese markets and customers, local market support Labs are supposed to be chosen so as to support Chinese markets; provided that investment motivations are in order to gain talents and science and technology resources, global technology centers are supposed to be used to achieve the highest synergy result; provided that investment motivations win an absolute competitive advantage in China, local market support Labs are extremely necessary in preoccupying markets; last but not the least, provided that investment motivations are environmental owing to their instability, local technology support Labs are a good choice for their relatively low R&D expenses.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.8
• /
• pp.805-814
• /
• 2011

Aluminum plate-fin heat exchangers (ALPHEs) are widely used in petroleum and gas-treated processes. The performance of the ALPHE is strongly dependent on the distribution characteristics of the header and the distributors of each fluid. In this paper, we define the aspect ratio in the side-entry type distributor and analyze the distribution characteristics using CFD-based numerical methods. The phenomena of velocity deviation and distribution with the aspect ratio and the inlet Reynolds number were analyzed by applying relative and absolute maldistribution parameters, and an optimum aspect ratio with the inlet Reynolds number was presented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.8
• /
• pp.603-609
• /
• 2016

This paper presents an optimally designed master device mechanism for teleoperated interventional robotic system. The interventional procedures using the teleoperated robotic system and the physicians' requirements are summarized. The master device should implement 5-DOF motion including 2-DOF translational motion for the entry position control, 2-DOF rotational motion for the orientation control, and 1- DOF translational motion for needle insertion. The handle assembly includes a 1-DOF translational mechanism for needle insertion and buttons for operation mode selection. The mechanisms for the 2-DOF translational motion and the 2-DOF rotational motion are designed using motors and brakes based on the various mechanisms to satisfy all the above requirements, respectively. Absolute position sensors are adopted to implement automatic initial positioning and orientation matching at the first step of needle insertion.

• Analytical Science and Technology
• /
• v.24 no.5
• /
• pp.387-394
• /
• 2011

This study was performed to investigate the contents and leaching characteristics of hazardous wastes from the paint industry. In order to establish a hazardous waste list, samples from industrial discharge have been analyzed for 8 non-regulated inorganic hazardous substances (i.e., Sb, Ni, F, V, Ba, Zn, Be, Se). In more detail, hazardous waste samples from a total of 64 workplaces, e.g. manufacture, formulation, supply and use (MFSU) of coatings, adhesives, sealants and printing inks processing, have been chosen and analyzed. Contents and leaching tests for inorganic metal species in samples show that the non-regulated hazardous substances satisfy all the criteria, while quantitative analyses reveal that some samples of the discharged wastes exceeded the criteria proposed by NIER (National Instituted of Environmental Research). In conclusion, we expect the outcome of this study to align the classification system of hazardous waste management in South Korea with international legislations, and consequently contribute to reduce environmental pollution as well as health risks by toxic wastes.

• Analytical Science and Technology
• /
• v.26 no.4
• /
• pp.276-286
• /
• 2013

This study was performed to investigate the contents characteristics of hazardous oil wastes and wastes of liquid fuels from different industrial process. In order to establish a hazardous waste list, samples of various industrial discharge have been analyzed for 16 non-regulated inorganic hazardous substances (i.e., Cu, Pb, Cd, CN, Hg, As, T-Cr, $Cr^{6+}$, Sb, Ni, F, V, Ba, Zn, Be, Se). In more detail, hazardous waste samples including waste hydraulic oils, waste engine, gear and lubricating oils, waste insulating and heat transmission oils, bilge oils, oil/water separator contents processing were collected from 37 workplaces and analyzed. We observed that the most of the inorganic substances exceeded the proposed criteria in many samples. Especially the concentration of Sb in heat transmission oil, bilge oil and gear & lubricating oils were ranged from 6 to 419 mg/kg whereas the proposed criteria is 50 mg/kg. The assessment result of hazardous waste in Korea according to the EWC showed that the out of 24 processes, 16 belongs to absolute entry and 8 belongs to mirror entry. In conclusion, we expect the outcome of this study to align the classification system of hazardous waste management in South Korea with international legislations, and consequently contribute to reduce environmental pollution as well as health risks by toxic wastes.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.11
• /
• pp.6563-6568
• /
• 2013

Background: Tobacco use and quit attempts are two key indicators of the Global Adult Tobacco Survey (GATS) that assess quit attempts among current as well as former tobacco users. The relevant data have inherent policy implications for tobacco cessation programme evaluation. This study aimed to review the concepts of quit attempt assessment and quantifying invalid responses considering GATS-India data. Materials and Methods: GATS assessment of tobacco use and quit attempts were examined in the current literature. Two categories of invalid responses were identified by stratified analysis of the duration of last quit attempt among current users and duration of abstinence among former users. Category A included absolute invalid responses when time-frame of assessment of current tobacco use and less than former tobacco use were violated. Category B included responses that violated the unit of measurement of time. Results: Current daily use, current less than daily use and former use in GATS were imprecisely defined with overlapping of time-frame of assessment. Overall responses of 3,102 current smokers, 4,036 current smokeless users, 1,904 former smokers and 1,343 former smokeless users were analyzed to quantify invalid responses. Analysis indicated overall 21.2% (category A: 7.32%; category B: 17.7%) and 22.7% (category A: 8.05%; category B: 18.1%) invalid responses among current smokers and smokeless users respectively regarding their duration of last quit attempt. Similarly overall 6.62% (category A: 4.7%; category B: 2.3%) and 10.6% (category A: 8.6%; category B: 3.5%) invalid responses were identified among former smokers and smokeless users respectively regarding their duration of abstinence. Conclusions: High invalid responses for a single assessment are due to the imprecise definition of current use, former use and quit attempt; and failure to utilize opportunity of direct data entry interface use during the survey to validate responses instantly. Redefining tobacco use and quit attempts considering an appropriate timeframe would reduce invalid responses.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.344-352
• /
• 2022

Accurate indoor localization of construction workers and mobile assets is essential in safety management. Existing positioning methods based on GPS, wireless, vision, or sensor based RTLS are erroneous or expensive in large-scale indoor environments. Tightly coupled sensor fusion mitigates these limitations. This research paper proposes a state-of-the-art positioning methodology, addressing the existing limitations, by integrating Stereo Visual Inertial Odometry (SVIO) with fiducial landmarks called AprilTags. SVIO determines the relative position of the moving assets or workers from the initial starting point. This relative position is transformed to an absolute position when AprilTag placed at various entry points is decoded. The proposed solution is tested on the NVIDIA ISAAC SIM virtual environment, where the trajectory of the indoor moving forklift is estimated. The results show accurate localization of the moving asset within any indoor or underground environment. The system can be utilized in various use cases to increase productivity and improve safety at construction sites, contributing towards 1) indoor monitoring of man machinery coactivity for collision avoidance and 2) precise real-time knowledge of who is doing what and where.

• Journal of Digital Convergence
• /
• v.16 no.3
• /
• pp.275-289
• /
• 2018

It is necessary to develop a bridgehead port for trading with northern countries to promote trade through the East Sea because the East Sea Rim economic bloc around the Northeast Asia including South Korea, China, Russia, Japan, and North Korea has a high growth potential in the future. Therefore, this study aims to suggest a strategic direction to enhance the competitiveness of Donghae Port through reinforcement of container cargoes by conducting Importance-Performance Analysis (IPA) for stakeholders of Donghae Port. The analysis results suggest that it is necessary to improve the five evaluation factors: attractiveness of container and bulk volumes, appropriate ratio of export/import container quantities, frequency of vessel entry and diversity of sea routes, convenience of complex linked transportation, and competitiveness of cargo handling equipment. The implications of this study are as follows. First, it is necessary to continuously research the current status of container and bulk cargo volumes of the port and ways to increase the absolute cargo volume. Second, we need to consider realistic alternatives to improve the ratio of export/import container quantities. Third, in terms of network, we should establish a service improvement plan to increase the frequency of port calls and the diversity of sea routes. Furthermore, incentives should be provided to increase the trade volume of Donghae Port through strengthened complex linked transportation function. Finally, it is urgently necessary to provide investment support for container handling equipment as an essential requirement for the activation of the container cargoes in Donghae Port.