• Molecules and Cells
• /
• v.28 no.3
• /
• pp.209-213
• /
• 2009

Caenorhabditis elegans is a free living soil nematode and thus in its natural habitat, C. elegans encounters many different species of soil bacteria. Although some soil bacteria may be excellent sources of nutrition for the worm, others may be pathogenic. Thus, we undertook a study to understand how C. elegans can identify their preferred food using a simple behavioral assay. We found that there are various species of soil bacteria that C. elegans prefers in comparison to the standard laboratory E. coli strain OP50. In particular, two bacterial strains, Bacillus mycoides and Bacillus soli, were preferred strains. Interestingly, the sole feeding of these bacteria to wild type animals results in extended lifespan through the activation of the autophagic process. Further studies will be required to understand the precise mechanism controlling the behavior of identification and selection of food in C. elegans.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.2
• /
• pp.504-527
• /
• 2015

Underwater wireless sensor networks (UWSNs) are similar to the terrestrial sensor networks. Nevertheless, there are different characteristics among them such as low battery power, limited bandwidth and high variable propagation delay. One of the common major problems in UWSNs is determining an efficient and reliable routing between the source node and the destination node. Therefore, researchers tend to design efficient protocols with consideration of the different characteristics of underwater communication. Furthermore, many routing protocols have been proposed and these protocols may be classified as location-based and location-free routing protocols. Pressure-based routing protocols are a subcategory of the location-free routing protocols. This paper focuses on reviewing the pressure-based routing protocols that may further be classified into non-void avoidance protocols and void avoidance protocols. Moreover, non-void avoidance protocols have been classified into single factor based and multi factor based routing protocols. Finally, this paper provides a comparison between these protocols based on their features, performance and simulation parameters and the paper concludes with some future works on which further study can be conducted.

• The Plant Pathology Journal
• /
• v.23 no.2
• /
• pp.62-69
• /
• 2007

Twenty-nine isolates of Fusarium solani, originally isolated from diseased cotton roots in Egypt, were evaluated for their ability to cause symptoms on four genetically diverse cotton cultivars. Analysis of variance showed highly significant variance among cultivars, and isolates as well as the isolate x genotype interactions were highly significant(p < 0.0001). Although most isolates showed intermediate pathogenicity, there were two groups of isolates that showed significant differences in pathogenicity on all four cultivars. None of the cultivars were found to be immune to any of the isolates. On all cultivars, there were strong significant positive correlations between dry weight and each of preemergence damping-off, survival, and plant height. Considering 75% similarity in virulence, two groups comprising a total of 29 isolates were recognized. Ninety-three percent of the isolates have the same pathogenicity patterns with consistently low pathogenicity, and narrow diversity of virulence. Isolates Fs4 and Fs5 shared the same distinct overall virulence spectrum with consistently high pathogenicity. There was no clear-cut relationship between virulence of the isolates based on reaction pattern on 4 cultivars and each of host genotype, previous crop, and geographic origin.

• Journal of Power Electronics
• /
• v.13 no.5
• /
• pp.829-840
• /
• 2013

The modified sinusoidal pulse-width modulation (SPWM) is one of the PWM techniques used in three-phase AC-DC buck converters. The modified SPWM works without the current sensor (the converter is current sensorless), improves production of sinusoidal AC current, enables obtainment of near-unity power factor, and controls output voltage through modulation gain (ranging from 0 to 1). The main problem of the modified SPWM is the huge starting current and voltage (during transient) that results from a large step change from the reference voltage. When the load changes, the output voltage significantly drops (through switching losses and non-ideal converter elements). The single-input single-output (SISO) approach with minor-loop voltage feedback controller presented here overcomes this problem. This approach is created on a theoretical linear model and verified by discrete-model simulation on MATLAB/Simulink. The capability and effectiveness of the SISO approach in compensating start-up current/voltage and in achieving zero steady-state error were tested for transient cases with step-changed load and step-changed reference voltage for linear and non-linear loads. Tests were done to analyze the transient performance against various controller gains. An experiment prototype was also developed for verification.

• Structural Engineering and Mechanics
• /
• v.58 no.1
• /
• pp.181-197
• /
• 2016

In this paper, we investigated the propagation of surface waves in a nonhomogeneous rotating fibre-reinforced viscoelastic anisotropic media of higher order of nth order including time rate of strain. The general surface wave speed is derived to study the effect of rotation on surface waves. Particular cases for Stoneley, Love and Rayleigh waves are discussed. The results obtained in this investigation are more general in the sense that some earlier published results are obtained from our result as special cases. Also results for homogeneous media can be deduced from this investigation. For order zero our results are well agreed to fibre-reinforced materials. Also by neglecting the reinforced elastic parameters, the results reduce to well known isotropic medium. It is also observed that, surface waves cannot propagate in a fast rotating medium. Comparison was made with the results obtained in the presence and absence of rotation and parameters for fibre-reinforced of the material medium Numerical results are given and illustrated graphically. The results indicate that the effect of rotation and parameters for fibre-reinforced of the material are very pronounced.

• Journal of Welding and Joining
• /
• v.35 no.3
• /
• pp.44-51
• /
• 2017

In the present study, AA 5083-O plates are joined by friction stir welding technique. A universal milling machine was used to perform the welding process of the work-pieces which were fixed on the proper position by a vice. The joints were friction stir welded by two tools with different pin profiles; cylindrical threaded pin and tapered smooth one at different rotational speed values; 400 rpm and 630 rpm, and different welding speed values; 100 mm/min and 160 mm/min. During FSW of each joint, the temperature was measured by infra-red thermal image camera. The welded joints were inspected by visually as well as by the macro- and microstructure evolutions. Furthermore, the joints were tested for measuring the hardness and the tensile strength to study the effect of changing the FSW parameters on the mechanical properties. The results show that increasing the rotational speed results in increasing the peak temperature, while increasing the welding speed results in decreasing the peak temperature for the same tool pin profile. Defect free welds were obtained at lower rotational speed by the threaded tool profile. Moreover, the threaded tool pin profile gives superior mechanical properties at lower rotational speed.

• Journal of the Korean Chemical Society
• /
• v.57 no.2
• /
• pp.272-278
• /
• 2013

Extract of ginger has been evaluated as a green inhibitor for the corrosion of steel in sulfide polluted NaCl solution using potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and electrochemical frequency modulation (EFM) techniques. Potentiodynamic polarization measurements showed that this extract acts as a mixed type inhibitor but mainly inhibits the cathodic reaction. The inhibition efficiency was found to increase with inhibitor concentration reaching to approximately 83.9% using 250 ppm of ginger. Nyquist plots show a single capacitive loop in uninhibited and inhibited solutions. From EFM the causality factors are very close to theoretical values which indicate that the measured data are of good quality. The adsorption process of the studied extract on steel surface obeys Temkin adsorption isotherm. The results obtained from the different electrochemical techniques were in good agreement which prove the validity of these tools in measurement of corrosion rate. Ginger extract has no effect on Escherichia Coli and can be applied safely on waste water treatment plants.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.2
• /
• pp.95-100
• /
• 2017

In this study, the bacterial contamination level of equipments and devices in the nuclear medicine department of a university hospital was investigated. CNS was detected from the sample collected from the door opening button of the nuclear medicine department. Bacillus sp. was detected from the table and CNS with Bacillus sp. were detected from the control button at the PET-CT room no.1. Also, CNS was detected from the table and the control button at the PET-CT room no.2. In the distribution room no.1, CNS and Bacillus sp. were detected while CNS being detected from the distribution room no.2 and CNS with Bacillus sp. being detected from the distribution room no.3. In the injection room, Enterrococcus faecium and Pontoea sp. were detected. On the table of the ecsomatics room, Pontoea sp. was detected. Bacillus sp. was detected from the inside of the syringe Pb shield and CNS was detected from the outside. Enterrococcus faecium was detected from the Gamma camera table and Bacillus sp. was detected from the door grip. On the chair at the patient waiting room, Pseudomonas aeruginosa abd Bacillus sp. were detected. Therefore, it was understood that infection should be prevented by securely sterilizing examination devices after each examination, maintaining cleanliness by regular sterilization of waiting chairs and such objects with a number of direct contacts with patients, and infection education for the features of nuclear department.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.12
• /
• pp.75-83
• /
• 2021

Variation in demand, natural resource availability, and technological advancement within a country are the main reasons for necessitating export and import activities between nations. Accordingly, this paper aims to analyze the effect of economic openness on Multifactor Productivity (MFP) in selected Asian countries (Vietnam, Thailand, The Philippines, Indonesia, Cambodia, China, Japan, Malaysia, South Korea, and Singapore) based on data for the period 1990-2018. The analysis conducted in the study employed the panel ARDL approach based on the estimation by Pooled Mean Group (PMG), Mean Group (MG), and Dynamic Fixed Effect (DFE). The Hausman test conducted indicates that the PMG estimation is better than that of MG and DFE since it has a higher variability value than the significance value. The results revealed that economic openness is able to elicit significant and positive effects on short-term and long-term MFP growth. In addition, the study established that other variable, such as the number of schooling years, are also able to produce a positive and significant effect on MFP growth in the long term. Since economic openness can impact MFP growth, every country should thus increase its export activities through more capital and worker inputs that will stimulate greater production.

• Journal of applied mathematics & informatics
• /
• v.39 no.5_6
• /
• pp.785-804
• /
• 2021

The proposal of new families has been worked out by many authors over recent years. Many ways to generate new families have been developed as the methods of addition, linear combination, composition and, one of the newer, the T-X family of distributions. Using this latter method, Korkmaz et al. (2018) proposed a new class called Weibull Marshall-Olkin-G (WMO-G) family. In the present work, we propose a new distribution, based on the WMO-G family, using the Lomax distribution as baseline, called Weibull Marshall-Olkin Lomax (WMOL) distribution. The hazard rate function of this distribution can be increasing, decreasing, bathtub-shaped, decreasing-increasing-decreasing and unimodal. Some properties of the proposed model are developed. Besides that, we consider method of maximum likelihood for estimating the unknown parameters of the WMOL distribution. We provide a simulation study in order to verify the asymptotic properties of the maximum likelihood estimates. The applicability of the new distribution to modeling real life data is proved by two real data sets.