• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.7
• /
• pp.931-936
• /
• 2010

This experiment was conducted to evaluate the bioavailability of different organic selenium (Se) products in finishing pigs. A total of 48 growing pigs, average body weight $47.6kg{\pm}0.05$, were allotted to four different treatments in a randomized complete block (RCB) design in three replicates with four pigs per pen. Three different organic Se products, Se-enriched yeast (treatments A and B) and Se-proteinate (treatment C), were used in conjunction with a basal diet with no added Se as a control treatment. In growing period, pigs were fed the same diet but finishing pigs were fed each treatment diet containing organic Se products for 6 weeks. During the experimental period, feed intake and body weight were measured and blood samples were collected to determine the Se concentration. At the end of this experiment, 3 pigs per treatment were killed and various tissues (loin, liver, kidney, pancreas and spleen) were collected to analyze the Se concentration. The body weight, and average daily feed intake (ADFI) were similar among treatments, but the average daily gain (ADG) was increased on Se-proteinate treatment (p<0.01) and gain-to-feed ratio (G/F ratio) was improved on Se yeast B or Se-proteinate treatment (p<0.01). The tissue Se content was also increased when pigs were fed organic Se sources, and Se was retained efficiently in loin (p<0.01) and kidney (p<0.05) when Se yeast B was provided. The serum Se concentration was increased when organic Se was provided and was higher when pigs were fed Se-proteinate (p<0.01); subsequently liver Se was also higher on Se-proteinate treatment than other treatments. The Se yeast A treatment did not show any increment of Se concentration both in serum and tissues. This result demonstrated that Se retention and bioavailability in finishing pigs were varied by Se products although organic sources were provided. Consequently, each organic Se product should be evaluated before it is used as a supplement in animal feed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.3
• /
• pp.105-110
• /
• 2003

The ZnSe epilayers were grown on the GaAs substrate by hot wall epitaxy. After the ZnSe epilayers treated in the vacuum-, Zn-, and Se-atmosphere, respectively, the defects of the epilayer were investigated by means of the low-temperature photoluminescence measurement. The dominant peaks at 2.7988 eV and 2.7937 eV obtained from the PL spectrum of the as-grown ZnSe epilayer were found to be consistent with the upper and the lower polariton peak of the exciton, $I_{2}$ ($D^{\circ}$, X), bounded to the neutral donor associated with the Se-vacancy. This donor-impurity binding energy was calculated to be 25.3 meV, The exciton peak, $I_{1}^{d}$ at 2.7812 eV was confirmed to be bound to the neutral acceptor corresponded with the Zn-vacancy. The $I_{1}^{d}$ peak was dominantly observed in the ZnSe/GaAs : Se epilayer treated in the Se-atmosphere. This Se-atmosphere treatment may convert the ZnSe/GaAs : Se epilayer into the p-type. The SA peak was found to be related to a complex donor like a $(V_{se}-V_{zn})-V_{zn}$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.112-113
• /
• 2006

In this paper. we investigated a characteristic of holographic grating data erasure with non-polarized beam at amorphous chalcogenide As-Ge-Se-S thin film. A sample of holographic grating data was formed with DPSS laser for setup. Then, the erasure process was performed with He-Ne laser vertically at sample. As-Ge-Se-S(single layer). Ag/As-Ge-Se-S(double layer) and As-Ge-Se-S/Ag/As-Ge-Se-S(multi-layer) are manufactured to compare their characteristic of erasure.

• Journal of the Korean Vacuum Society
• /
• v.21 no.6
• /
• pp.322-327
• /
• 2012

The strain effects of ZnSe epilayer on ZnSe/GaAs heterojunction structure grown by molecular beam epitaxy have been investigated by using electroreflectance (ER) spectroscopy. The ER measurements were performed as a function of modulation voltage, dc bias voltage, and temperature. From the room temperature ER spectrum, we observed a heavy-hole (HH: 2.609 eV) and light-hole (LH: 2.628 eV) transitions due to a compressive strain. With increasing the bias voltage, the amplitude of HH transition signal decreased and the amplitude of LH transition signal was almost the same. From the temperature dependence of ER spectra, we have studied the interaction between the strain and the thermal expansion coefficient.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.2
• /
• pp.243-249
• /
• 2001

Thirty six barrows with an initial body weight of 28 kg were used to determine the effect of two dietary Se sources and a wide range of Se levels encompassing 0.3, 1.0, 3.0, 5.0, 7.0, and 10.0 mg/kg Se. The organic Se form was a Se-enriched yeast product, whereas the inorganic Se source was sodium selenite. The experiment was a $2{\times}6$ RCB design conducted in three replicates. Each barrow was placed in an individual metabolism crate and provided their dietary treatment and water on an ad libitum basis for a minimum 2 wk period, whereupon feed intake was adjusted to a constant intake within replicate at approximately 90% of intake for a 4 d adjustment period. Urine and feces were subsequently collected for a 7 d period and analyzed for Se and minerals. The results demonstrated that urinary Se was approximately 25% higher when pigs were fed sodium selenite (p<0.01), whereas fecal Se was lower by 25% (p<0.01). Se retention tended to be higher when organic Se was provided (p>0.15). Urinary Se increased as dietary Se level increased for both Se sources but increased more and at a high rate when sodium selenite was fed resulting in an interaction response (p<0.01). Fecal Se increased linearly as the dietary level of both Se sources increased, but the fecal Se from organic Se increased at a faster rate resulting in an interaction response (p<0.01). Se retention increased linearly (p<0.01) as dietary Se increased for both Se sources. The apparent digestibility of Se increased by Se level when pigs were fed sodium selenite, but not when the organic Se source was provided resulting in an interaction response (p<0.05). Retention of consumed Ca, Zn increased when pigs were fed organic Se (p<0.05) whereas P and Na retention were higher when the inorganic Se was provided. Mineral retention was not affected by dietary Se level except P. These results suggest that Se excretion by urine was the main route of excretion when pigs were fed sodium selenite but the fecal route when Se-enriched yeast was provided. The excretion of Fe, Zn, Mn, and Cu via urine and feces was not affected by high dietary Se level or dietary Se sources.

• Animal Bioscience
• /
• v.35 no.12
• /
• pp.1948-1956
• /
• 2022

Objective: This study was conducted to evaluate the effects of selenium (Se) source and level on the physiological response, reproductive performance, serum Se level, and milk composition in gestating sows. Methods: A total of 54 multiparous sows (Yorkshire×Landrace) with average body weight (BW), backfat thickness (BF), and parity were assigned to one of five treatments with 10 or 11 sows per treatment using a 2×2 factorial arrangement with one additional treatment in a completely randomized design. Inorganic or organic Se (IS or OS) sources were added to the diet at 0.30 ppm and 0.50 ppm Se. A non-Se-fortified corn-soybean meal basal diet served as a negative control. Treatments were as follows: i) Control: corn-soybean based diet, ii) IS30: control+inorganic Se 0.30 ppm, iii) IS50: control+inorganic Se 0.50 ppm, iv) OS30: control+ organic Se ppm, and v) OS50: control+organic Se 0.50 ppm. Results: At day 21 of lactation, piglet weight and weight gain in the OS treatments were higher than those in the IS treatments (p<0.05). Meanwhile, adding 0.5 ppm Se also resulted in the same significant differences in piglet BW and weight gain (p<0.05). Colostrum and milk Se concentrations increased (p<0.05) with Se level for both Se sources but were greater when sows were fed organic Se (p<0.05). Except for 24 hours postpartum, the Se concentrations were higher when sows were fed organic Se (p<0.05). Sow serum Se content was greater as Se levels increased from 0.3 ppm to 0.5 ppm at day 110 of gestation, 24 hours postpartum and day 21 of lactation (p<0.05). The pig serum Se concentration increased as the dietary Se level increased (p<0.05) and was higher when the sow dietary Se source was organic (p<0.05). Organic Se 0.5 ppm also had the highest serum Se level at two measured points (p<0.05). Conclusion: Consequently, supplementation with organic Se or 0.5 ppm Se in a gestating diet could improve piglet performance, the Se status of sows and piglets and milk composition, but organic Se at 0.5 ppm is optimal.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.318-321
• /
• 2007

CdSe nanoparticles were prepared by chemical solution methods using $CdCl_2{\cdot}4H_2O$ (or $Cd(NO_3)_ 2{\cdot}4H_2O$) and $Na_2SeSO_3$. The characteristics of CdSe nanoparticles were controlled by the react ion time, reaction temperature and reaction method as well as the surfactants. Cetyltrimethyl ammonium bromide(CTAB) was used as a capping agent to control the chemical reactions in aqueous solution. Polyvinylalcohol(PVA) was used as a templet in sono-chemical method. CdSe nanoparticles synthesized in aqueous solution showed homogeneous size distribution with relatively stable surface. CdSe nanoparticles synthesized in non-aqueous solution containing diethanolamine(DEA) showed the structure transformation from cubic to hexagonal as the reduction temperature increased from 80 to $160^{\circ}C$. Core shell CdSe was synthesized by sono-chemical method. Characteristics of CdSe nanoparticles were analyzed using transmission electron microscopy(TEM), x-ray photoelectron spectroscopy(XPS), x-ray diffraction(XRD), UV-Vis absorption spectra, fourier transform infrared spectroscopy(FT-IR) and photoluminescence spectra spectroscopy(PL). This paper presents simple routes to prepare CdSe nanoparticles for solar cell applications.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.7 no.1
• /
• pp.118-130
• /
• 2005

This study was conducted to evaluate the spent composts of selenium-enriched mushrooms as a feed selenium Source. Total selenium (Se) contents and Se profiles in the spent mushroom composts (SMC) were determined. In addtion, we also investigated the metabolism in relation to Se accumulation in the mushroom. Mushrooms used in this study were Flammulina velutipes and Se enriched mushrooms were grown for 60 days by adding 2 mg of inorganic Se (Na₂SeO₃) per kg of mushroom composts (MC) on as-fed basis and it was compared with mushrooms not to add Se to the MC. Total Se contents for Se-treated mushrooms were significantly increased (P<0.0001) by 20-fold (4.51 ㎍/g of dry) compared to Se-untreated (0.23 ㎍/g of dry). On the contrary, organic Se proportion was significantly lower (P<0.0001) in the Se-treated mushroom (72.3%) than Se-untreated (100%, not analytically detected of inorganic Se). Se distribution upon a length in the Se-treated mushrooms was the highest in the bottom part (6.86 ㎍/g of dry) near to MC, and top and middle parts were significantly lower (3.71 and 3.01 ㎍/g of dry, respectively) than the bottom (P<0.001). In the SMC from Se-treated mushrooms, a high concentration of Se (5.04 ㎍/g of dry) was still remained, but that from Se-untreated mushrooms was significantly low (P<0.0001) as 0.08 ㎍/g of dry. Se-treated SMC showed a high rate of organic Se (65.67%), suggesting that most of inorganic Se in the SMC was converted to organic Se by mushroom mycelia, and Se-untreated SMC showed 100% of organic Se, not being detected of inorganic Se. Prior to mycelia inoculation in the mushroom culture, the sterilization of MC brought approximately 18% of Se loss in the MC. This result is in accordance with facts generally known that Se is weak in the high temperature and it is consequently volatilized under that condition. Apparent and net accumulation rates (%) for Se into mushrooms were 14.81 and 10.14%, respectively and their difference (4.67%) is considered that it is due to the volatilization into the air via metabolic process of mushroom itself. From the result of this study, inorganic Se addition to MC for mushroom improved the Se content in the mushroom and SMC from Se-enriched mushrooms contained a high concentration of Se. Mycelium and fruiting body from mushrooms converted inorganic Se in MC to organic Se, indicating a high proportion of organic Se in the mushroom and SMC. Therefore, Se in Se-enriched mushroom and SMC was recognized as Se sources of food for human as well as feed for livestock.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.305-306
• /
• 2005

The effects of As addition In amorphous selenium (a-Se) films for digital X-ray conversion material have been studied using the moving photocarrier grating (MPG) technique We have found an increase in hole drift mobility and recombination lifetime, especially when 0.3% As is added into a-Se film, whereas electron mobility decreases with As addition due to the defect density. The transport properties for As doped a-Se films obtained by using MPG technique have been compared with X-ray sensitivity for a-Se:As X-ray device. The fabricated a-Se (0.3%As) based X-ray detector exhibited the highest X-ray sensitivity of 5 samples.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.47-48
• /
• 2005

The moving photocarrier grating(MPG) technique for the determination of the carrier mobilities and the recombination lifetime in a-Se:As films have been studied. The electron and hole drift mobility and the recombination lifetime of a-Se films with arsenic (As) additions have been obtained. We have found an increase in hole drift mobility and recombination lifetime, especially when 0.3% As is added into a-Se film. However, the electron mobility exhibits no observable change up to 0.5% As addition in a-Se films.0.3% As added a-Se film also exhibits the maximum short circuit current densities per laser intensity of $5.29\times10^{-7}$ A/W.