• 제목/요약/키워드: a-C:Ti

검색결과 3,742건 처리시간 0.026초

유색 전기석의 화학적 및 광학흡수 분광학적 연구 (Chemical and Optical Absorption Spectroscopic Study of Colored Tourmalines)

  • 김희종;김수진
    • 한국광물학회지
    • /
    • 제6권1호
    • /
    • pp.1-16
    • /
    • 1993
  • 미국의 샌디에고광산에서 산출되는 분홍색이나 무색의 전기석과 산지가 알려지지 않은 브라질산의 청색 내지 녹색을 띄는 전기석 그리고 국내의 학산, 운천 광산에서 산출되는 흑갈색 전기석들의 화학적 성분과 광물 흡수 분광학적 특성을 연구하기 위하여 X선 회절기, 전자 현미 분석기, 광학적 흡수 분광분석 및 열 처리 실험 등을 이용하였다. 최소 자승법을 활용하여 단위포 크기를 구하면, 흑갈색 전기석 경우 a = 15.96-16.01 ${\AA}$, c = 7.15-7.16 ${\AA}$이며, 분홍색 전기석은 a = 15.82 - 15.87 ${\AA}, c = 7.09 - 7.10 ${\AA}$이며, 청색/녹색 전기석은 a = 15.88 - 15.94 ${\AA}$, c = 7.12 - 7.15 ${\AA}$이다. 전기석 광물들이 여러가지 다양한 색을 띄는 주요한 원인은 전이 원소들에 의한 것이다. 분홍색은 망간 3가, 청색 내지 녹색은 철 2가와 망간 2가, 청녹색은 구리 2가, 흑갈색은 철 2가, 철 2가 - 철 3가, 그리고 철 2가 - 티타늄 4가에 의해 색을 띄게 된다. 분홍색 전기석 경우, 망간 3가는 압축된 Y자리에서 O(1)H-O(3)H 축을 따라 쟌-텔러 변형으로 안정한 구조를 가지게 된다. 전기석 광물들을 고온으로 열처리하면, 일반적으로 분홍색 혹은 빨간색을 띄는 전기석들은 무색으로 변색이 되며, 청녹색은 녹청색으로 색상이 변하며, 황녹색 같은 경우는 일부 샘플들만 옅은 녹색으로 바뀌는 모습이 관찰되었다. 엘바이트-흑전기석 계에서는 철과 망간의 함량에 따라 색의 누대구조가 나타난다. 녹색 영역에서는 철의 함량이 높으며 분홍색 영역에서는 망간의 함량이 높다. 망간은 황색이나 무색 영역에서 보다 짙은 황색 영역에서 증가한다.났다.억제물질로 작용할 때 $K_i$값과 억제양상이 측정되었는데 모두 경쟁적 방해를 보였다. $K_i$값은 10mM 인산완충용액에서 측정한 것이 100 mM 인산완충용액에서 측정한 것보다 훨씬 낮아 인산기가 기질이 아니어도 효소의 부착에 큰 영향을 미치는 것을 보여주고 있다.

  • PDF

벼의 생육시기별 염수처리에 따른 주요 특성의 품종간 차이 (Varietal Differences in Agronomic Characters of Rice Grown on Salty Water Irrigation)

  • 정진일;김보경;박형만;이선용
    • 한국작물학회지
    • /
    • 제40권4호
    • /
    • pp.494-503
    • /
    • 1995
  • 벼 품종의 효율적인 내염성 검정방법을 확립하기 위하여 호남농업시험장 개화도출장소 내염성 검정포에서 45개 벼 품종을 공시하여 유묘기, 분벽기, 유수형성기에 각각 염수처리를 하여 내염성을 검정하였다. 1. 분벽기 염수처리는 무처리와 비교하여 초장의 신장율은 조생종군 77.4%로 단축되었고, 경수는 조생종군 88.8%, 중생종군 63.8%, 중만생종군 64.0%로 각각 줄어들었다. 2. 유수형성기의 염수처리 결과는 처리 전보다 초장의 신장율은 조생종군 7.4%, 중생종군 4.5%, 중만생종군 4.0%로 생육시기이 짧은 품종들이 신장율이 높은 경향이었고, 경수의 감소율은 조생종군 15.4%, 중생종군 17.3%, 중만생종군 24.6%로 만생종일수록 많이 줄어 들었다. 3. 유수형성기 염수처리에서 고염율은 조생종군 62.2%, 중생종군 60.6%, 중만생종군 65.1%로 중만생종군이 심한 편이었으며, 건물중은 중생종 > 중생종 > 중만생종 순으로 무거웠다. 4. 생육단계별 단관조사한 내염성 정도는 대관벼, 조령벼, 남원벼, 간척벼, 신선찰벼, 개화벼, 대야벼 등은 강하게 나타났고, 진부올벼, 둔내벼, 탐진벼, 대청벼 추정벼 등은 약하게 나타났다. 5. 무처리재배에 대한 염수처리재배의 수량지수는 조생종군 > 중생종군 > 중만생종군 순으로 높았고, 진부벼, 남원벼, 화성벼, 팔공벼, 화청벼, 개화벼 등은 수량 감소가 적게 나타난 품종들이었다. 6. 수량감소율에 대한 염수처리의 각종 특성과의 상관에서 조, 중생종군은 분벽기와 유수형성기의 내염성 정도와는 부의 상관을 보였고, 분벽기의 초장감소율과는 정의 상관을 보였으며, 조생종군에서는 고엽율과의 부의 상관을 보였고, 중만생종군에서는 유수형성기의 경수감소율과 고엽율 등에서 부의 상관관계를 보였다. 있어서 다른 조건이 좋은 경우 등숙에 적당한 온도범위는 21~26$^{\circ}C$로 나타났다.다. 6. 파종 10일후 묘의 생육에 있어서도 1대잡종벼가 양친이나 비교품종보다 건물중, 초장 등에서 잡종강세를 나타내었으며 묘의 생육과 a-amylase 활성간에는 유의한 정의상관이 있었다./TEX>, RH 50%)한 벼는 2년반 저장한 벼도 밥맛의 변화가 거의 없었다. 5. 1988년산 및 1989년산 일반계를 10분도와 12분도로 도정하였을 때 도정도에 따른 밥맛의 차이는 없었다.X>$CoO_x$는 $Co_3O_4$로 존재하고, 반응 전의 경우에는 이와는 다른 chemical state를 보여주었다. XRD 및 XPS 결과를 바탕으로, 촉매표면에 존재하는 $Co_3O_4$의 외부표면이 $Co_2TiO_4$$CoTiO_3$ 같은 $CoTiO_x$로 encapsulation되어 있는 모델구조를 제안할 수 있고, 이는 반응시간의 함수로 나타나는 촉매활성에 있어서 전이영역의 존재를 잘 설명할 수 있을 뿐만 아니라, XRD와 XPS에서 얻어진 촉매의 물리화학적인 특성을 잘 반영할 수 있다. 나타냈고, 골격근과 눈 조직에서 피루브산에 대한 LDH의 친화력이 상당히 크므로 LDH가 혐기적 조건에서 효율적으로 기능을 하는 것으로 사료된다.5) and "Cleanliness of clothes & features" (p <0.05) of VIP ward were significantly higher than those of a general ward.tive to apply.아울러 고려(考慮)해야 한다. 이것은 고무기술자(技術者)가 당면(當面)해야할

  • PDF

시간 경과에 따른 YBCO 초전도 복합체의 포획 자기장 감쇄 (The Trapped Field Decay of YBCO Superconductor Composite with Times)

  • 이만수;장건익;전병혁;하동우;손명환;한영희;박병준
    • Progress in Superconductivity
    • /
    • 제12권2호
    • /
    • pp.82-87
    • /
    • 2011
  • We studied the trapped field properties of bulk Y-Ba-Cu-O superconductors by applying 3 T of the permanent or $Nb_3Ti$ superconducting magnet. The 28 mm circular type of YBCO bulk superconductor was prepared and then hole at the center of bulk, parallel to the c-axis, was mechanically drilled. Typical size of hole in YBCO bulk was 10 mm in diameter. In order to examine the trapped field variation in terms of different impregnated materials, a hole in YBCO bulk was filled with resin and indium respectively. The trapped field decay due to flux flow was determined in terms of time. Our preliminary result indicates the trapped field value measured on the YBCO without hole after 30 minute by applying 3 T, was 6,500 G, which is much higher than that, 4,500 G, measured on YBCO with hole. Also, we confirmed that the tendency of a trapped field decrement with time was almost the same regardless of the impregnated materials in YBCO.

In vitro evaluation of resistance to sliding in self-ligating and conventional bracket systems during dental alignment

  • Cordasco, Giancarlo;Giudice, Antonino Lo;Militi, Angela;Nucera, Riccardo;Triolo, Giuseppe;Matarese, Giovanni
    • 대한치과교정학회지
    • /
    • 제42권4호
    • /
    • pp.218-224
    • /
    • 2012
  • Objective: To investigate the resistance to sliding (RS) in self-ligating and conventional ligation bracket systems at 5 different second-order bracket angulations by using low-stiffness alignment wires in a 3-bracket experimental model and to verify the performance of the main RS components in both systems when these wires are used. Methods: Interactive self-ligating brackets with closed and open slides were used for the self-ligating (SL) and conventional ligation (CL) groups, respectively; elastomeric ligatures (1 mm inner diameter) were used in the latter system. The alignment wire used was 0.014 inch heat-activated NiTi (austenitic finish temperature set at $36^{\circ}C$ by the manufacturer). A custom-made testing machine was used to measure frictional resistance. Tests were repeated 5 times at every angulation simulated. All data were analyzed statistically. Results: The RS increased significantly with increasing angulation in both SL and CL groups (p < 0.0001). However, the RS values were significantly higher at every angulation (p < 0.0001) in the CL group. Conclusions: Despite the relevance of the binding phenomenon, ligation forces predominantly affect the RS when lowstiffness alignment wires are used.

순수 티타늄 판재의 피로균열 전파거동에 관한 연구 (A Study on Fatigue Crack Propagation Behavior with Pure-Ti Plate)

  • 오세욱;김태형;김득진;임만배
    • 한국해양공학회지
    • /
    • 제9권1호
    • /
    • pp.92-100
    • /
    • 1995
  • The effect of different anisotropy and stress ratio on fatigue crack propagation behavior was investigated under various stress ratio(R=-0.4, -0.2, 0.2, 0.2, 0.4) using pure titanium sheet used in aerospace, chemical and food industry. The rack closure behavior under constant load amplitude fatigue crack propagation test was examined. Fatigue crack propagation rate da/dN was estimated in terms of effective stress intensity factor range, $\Delta$K$_{eff}$, regardless of various stress ratio but was influenced by anisotropy. Also, it was found that the effect of anisotropy was considerably decreased but still not negligible when he da/dN was evaluated by a conventional parameter, $\Delta$$K_{eff}$/E and when the modified da/dN.$\sqrt{\varepsilon}_f$ was evaluated by $\Delta$$K_{eff}$/E. On the other hand, da/dN could be evaluated uniquely by effective new parameter, $\Delta$K$_{eff}$/$sigma_{ys}$, regardless of anisotropy, as int he following equation da/dN=C''[\frac{{\Delta}K_{eff}}{{\sigma}_{ys}}]^{n''}. And effective stress intensity factor range ratio, U was estimated by the following equation with respect to the ratio of reversed plastic zone size, $\Delta r_{p}$ to monotonic plastic zone size, $r_p$ regardless of stress ratio and anisotropy. U=-4.45$(\Delta r_{p}/r_{p})^{2}$+4.1$(\Delta r_{p}/r_{p})$+0.245_{p})$+0.245

  • PDF

정자운동 개시 기구 (Mechanisms for the Initiation of Sperm Motility)

  • 고강희;강경호;장영진
    • 한국발생생물학회지:발생과생식
    • /
    • 제7권2호
    • /
    • pp.81-88
    • /
    • 2003
  • 정자의 운동개시는 수정시에 정자와 난자가 만나기 위한 전제조건이다. 동물의 정자는 CAMP와Ca2'의 조절기구에 의해서 정자의 운동개시가 일어난다. 정자운동 활성 및 개시를 위한 세포 신호전달기구는 멍게류와 연어과 어류에서 많은 연구가 이루어져 왔다. 멍게류의 경우, 난에서 분비되는 정자 활성 및 유인물질(sperm-activating and -attracting factor)은 정자 활성 및 난으로의 유인을 위하여 외부의 $Ca^{2+}$을 요구한다. 한편 연어과 어류의 정자에서는 Cyclic AMP 의존형의 단백질 인산화가 정자 운동개시 기구에 관여한다. 방정된 정자 주위의 $K^{+}$ 농도의 감소는 특정한 $K^{+}$ channel 및 dihydropyridine 감수성의 L-/T- type $Ca^{2+}$ channel을 통한 $K^{+}$ 유출과 $Ca^{2+}$ 유입에 의해 세포막의 과분극과 세포내 $Ca^{2+}$ 이온의 농도증가를 가져온다. 세포막의 과분극에 의해서 합성된 cyclic AMP는 정자 운동개시의 주요기구인 cyclic AMP의존형의 단백질 인산화를 유도한다.

  • PDF

저탄소강에서 Planetary 볼밀링에 의한 나노결정 페라이트의 형성 (Formation of Nanocrystalline Ferrite by Planetary Ball Milling in a Low Carbon Steel)

  • 이혜정;이상우;오명훈
    • 열처리공학회지
    • /
    • 제18권1호
    • /
    • pp.29-40
    • /
    • 2005
  • Formation of nanocrystalline ferrite was investigated using milled powders obtained by planetary ball milling of chips, which were made by high speed mechanical cutting of a low carbon steel(0.15%C-1.1%Mn-0.01%Ti). After 4 hour milling the chips were changed to powders of $50{\mu}m$ in average size, and with increasing milling time the powders were refined to about $3{\mu}m$ for 128 hour and showed more equiaxed shapes. Nanocrystalline(nc) region appeared in the surfaces of powders milled for 1 hour, and the 4 hour milled powders were almost filled with nc region. Hardness of nc region was much higher than that of work-hardened(WH) region. With increasing milling time, ferrite and cementite in pearlite were severely deformed and lamellar spacing was decreased, and then cementites began to disappear after 4 hour milling due to dissolution into ferrite. Deformation bands formed in lightly work-hardened region showed large width and similar crystallographic orientations. Spacing of deformation bands was decreased with deformation and the layered microstructure consisting of narrow deformation bands subdivided into variously oriented small grains was formed by more deformation, and eventually this structure seemed to be evolved to the nc structure by further deformation. It is also conjectured the growth of nc ferrite grains occurred through the coalescence of nanocrystalline ferrites rather than the nucleation and growth of recrystallized grains.

전통양념으로 숙성하여 함기포장한 돼지고기의 저장 중 품질변화 (Changes of Qualities in Aerobic Packed Ripening Pork Using a Korea Traditional Seasoning During Storage)

  • 진상근;김일석;하경희;허선진;류현지;박기훈;배대순
    • Journal of Animal Science and Technology
    • /
    • 제47권1호
    • /
    • pp.73-82
    • /
    • 2005
  • This study was carried out to evaluate changes in the characteristics of the fermented pork using a Korean traditional seasonings. Biceps femoris were cut to cube(7 ${\times}$ 12 ${\times}$ 2 em) and three Korean traditional seasonings such as soybean paste(Tl), garlic paste(T2), red pepper paste(T3), were seasoned by the proportions of meat to each seasonings(l: 1), respectively. The seasoned samples were fermented at 0 $\pm$ 1 $^{\circ}C$ for 10 days. Sensory evaluation did not significantly differ between all treatments. The highest pH among treatments were shown in T2, wheres T3 showed the lowest value. The highest saccarinity was shown in T2, followed by T3. Salinity was shown to be higher in all treatments. Shear force value was the highest in T2 and T3. VBN and TBARS increased during storage. The total bacterial counts was highest of storage 21 days. E. coli. was higher in the order of T2 > T3 > TI. Lactobacilli spp. was higher in the order of T2 > T1 > T3.

PZN-PNN-PZT계 압전 조성에서 PZN 함량과 Sr Doping이 압전 특성에 미치는 영향 (The Effects of PZT Ratio and Sr Doping on the Piezoelectric Properties in PZN-PNN-PZT)

  • 최정식;이창현;신효순;여동훈;이준형
    • 한국전기전자재료학회논문지
    • /
    • 제31권1호
    • /
    • pp.19-23
    • /
    • 2018
  • In a Pb-included piezoelectric composition, $Sr_yPb_{1-y}[(Zn_{1/3}Nb_{2/3})_x-(Ni_{1/3}Nb_{2/3})_{0.2}-(Zr_{0.46}Ti_{0.54})_{0.8-x}]O_3$ was selected in order to attain high piezoelectric properties. According to the PZN ratio (x) and the amount of Sr doping (y), the crystal structure, microstructure and piezoelectric properties were measured and evaluated. In the case of Sr 4 mol% doping, the piezoelectric properties were the highest for a PZN ratio of 0.1. In this condition, the grain size was larger and the intensity was higher. With the PZN ratio fixed and varying the Sr doping, the piezoelectric properties increased until 10 mol% doping and then decreased for over 12 mol% doping. In the case of x=0.1 and y=10 mol%, the best piezoelectric properties were obtained, i.e., $d_{33}=660pC/N$ and $k_p=68.5%$, and these values seem to be related to the grain size and crystal structure.

해양식량자원의 가공조건별 영양적 품질평가 -2. 명태연육 단백질품질에 미치는 냉동변성방지제의 영향- (Effects of Processing Conditions on Nutritional Qualities of Seafood -2. Effects of Cryoprotectants on the Protein Qualities of Pollock Surimi-)

  • 류홍수;이근우;이강호
    • 한국수산과학회지
    • /
    • 제27권4호
    • /
    • pp.335-343
    • /
    • 1994
  • 명태연육 냉동변성을 억제할 수 있는 냉동변성방지제의 적정량을 알아보기 위하여 crystalline sorbitol을 비롯한 세가지의 변성방지제 및 sorbitol/sucrose 혼합제제를 첨가하 여 $-25^{\circ}C$에서 16주간 저장했을 때의 단백질품질 변화를 실험하였다. $8\%$ 수준의 sucrose-sorbitol 혼합제제(1:1, w/w)를 $0.2\%$ Na-pyrophosphate/ Na-triphosphate(1:1)와 병용하였을 때 drip loss가 가장 적었으며, 염용성단백질량은 가장 많았다. 또한 혼합제제를 사용했을 때는 trypsin inhibitor량, 단백질소화율 및 단백효율비의 변화가 거의 없어 단백질품질 보전에 효과적이었으나, 냉동변성방지제를 처리하지 않았을 경우에는 단백효율비와 소화율은 급격히 떨어졌었다. Polyphosphate나 maltodextrin의 경우에는 처리 농도가 증가하여도 소화율저하 방지에는 별효과가 없었으나, $4{\sim}6\%$의 sorbitol, 또는 $10\%$수준의 sucrose는 polyphosphate를 병용하지 않아도 소화율저하는 효과적으로 막을 수 있었다. $8\%$ 수준의 sorbitol/sucrose 혼합제제(5:3, w/w)처리가 소화율 보전효과로 볼 때 냉동연육의 단백질품질저하 방지에 가장 효과적이었다.

  • PDF