• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.964-967
• /
• 2001

Aspherical lens with the higher numerical aperture has been needed in the optical storage device to increase the recording density on the disk. However, high numerical aperture means the large slope angle at the clear aperture of the lens. Therefore, the measurement and manufacturing technique including the lens molding process for the slope angle should be developed. In this paper, the evaluation technique was described for the optical performance of the aspherical lens. Aspherical form error brings about the wavefront error and the side lobe of the beam intensity profile. A schematic diagram of the aspherical lens manufacturing was drawn to explain the aspherical form error compensation. Finally, form error of the aspherical lens was defined and plotted using the raw data of the Formtalysurf.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.483-488
• /
• 2000

This study aims at developing the high speed/intelligent machining system using the plug/play method of an open architecture controller. The plug/play technology by the application Specific Function (ASF), can readily implement the open architecture controller into various machining system or other automatic devices. The plug/play method integrates the ASF, visual builder, controller OS technology. This study, as an example, presents a schematic diagram for integration of an open architecture CNC and individual component technology for the high speed/intelligent machining system.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.2
• /
• pp.121-132
• /
• 1993

A three-dimensional barotropic model is used to compute meteorologically-induced circulations in the East Sea for monthly, seasonal and annual basis. The computed barotropic responses have shown that in the upper part of the 40$^{\circ}$ North latitude. counterclockwise meso-scale eddies have been formed off Dong Han Man, middle part of the East Sea and sea area between the Siberian coast and Hokkaido throughout the year except summer season. These results are in good agreements with some of earlier schematic circulation diagram.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.107-111
• /
• 2019

In FPD WET equipment, heaters are used a lot. There are many electric accidents caused by short circuit and overheating due to the use of heater, so it is necessary to have a safe electric system and interlock. Therefore, in this paper, we propose an electrical schematic and interlock for FPD WET equipment. In this paper, a hardware interlock such as a level sensor, an overheat protector, and an SSR heater sink is inserted, and the electric system is composed of ELB - MC - SSR - EOCR - heater. When the interlock occurs, the magnetic contactor (MC) is turned off and the power of the heater is cut off.EOCR, an electric overcurrent protection device, has an interlock to shut down the MC when there is an abnormality in the heater while checking the overcurrent, undercurrent and disconnection. These circuit configurations and interlocks are likely to be useful not only for WET equipment but also for any equipment in which the heater is placed.

• Journal of the Korean earth science society
• /
• v.42 no.3
• /
• pp.296-310
• /
• 2021

El Niño is a typical ocean and atmospheric interaction phenomenon that causes climate variability on a global scale, so it has been used as a very important teaching and learning material in the field of earth science. This study summarized the distribution and dynamics of the equatorial current system. The variability of the equatorial current system during the El Niño period and the associated misconceptions were also investigated. The North Equatorial Current, South Equatorial Current, and Equatorial Under Current significantly weaken during El Niño years. However, the variability of the North Equatorial Counter Current (NECC) during the El Niño period cannot be generalized because the NECC shows southward movement with weakening in the northern area and strengthening in the southern area, along its central axis. In the western Pacific, the NECC is further south during El Niño years, and thus, it has an eastward flow in the equatorial western Pacific. Our analysis of a mass media science article, a secondary school exam, and a survey for incumbent teachers confirmed disparate ideas about the equatorial current system's variability during El Niño periods. This is likely due to inaccurate interpretations of the existing El Niño schematic diagram and insufficient understanding of the equatorial current and wave dynamics.

• Atmosphere
• /
• v.29 no.3
• /
• pp.325-342
• /
• 2019

Precipitation and no-precipitation events under the influence of the Siberian high pressure system in Yeondong region, were analysed and classified as four types [obvious precipitation event (OP) type, obvious no-precipitation event (ON) type, ambiguous precipitation event (AP) type and ambiguous no-precipitation event (AN) type], according to the easiness in determining whether to have precipitation or not in Yeongdong region, to help in improving the forecast skill. Concerning the synoptic pressure pattern, for OP type, the ridge of Siberian high extends from Lake Baikal toward Northeast China, and there is a northerly wind upstream of the northern mountain complex (located near the Korean-Chinese border). On the other hand, for ON type, the ridge of Siberian high extends southeastward from Lake Baikal, and there is a westerly wind upstream of the northern mountain complex. The pressure pattern of AP type was similar to the OP type and that of AN type was also similar to ON type. Thus it was difficult to differentiate AP type and OP type and AN type and ON type based on the synoptic pressure pattern only. The four types were determined by U (wind speed normal to the Taebaek mountains) and Froude number (FN). That is, for OP type, average FN and U at Yeongdong coast are ~2.0 and ${\sim}6m\;s^{-1}$, and those at Yeongseo region are 0.0 and $0.1m\;s^{-1}$, respectively. On the contrary, for ON type, average FN and U at Yeongdong coast are 0.0 and $0.2m\;s^{-1}$, and those at Yeongseo region are ~1.0 and ${\sim}4m\;s^{-1}$, respectively. For AP type, average FN and U at Yeongdong coast are ~1.0 and ${\sim}4m\;s^{-1}$, and those at Yeongseo region are 0.0 and $0.2m\;s^{-1}$, whereas for AN type, average FN and U at Yeongdong coast are 0.1 and $0.6m\;s^{-1}$ and those at Yeongseo region are ~1.0 and ${\sim}3m\;s^{-1}$, respectively. Based on the result, a schematic diagram for each type was suggested.

• 한국HCI학회:학술대회논문집
• /
• 2006.02b
• /
• pp.57-62
• /
• 2006

건축디자인 초기단계에서 다이어그램은 아이디어 및 디자인 해결방안을 도출하기 위한 분석 도구로써 중요한 의미를 지닌다(Wang, 1999; Do, 1997). 이러한 다이어그램은 시각적 디자인 피드백을 가능하게 함으로써 건축디자인 실무 및 교육에서 필수적인 디자인 도구라고 할 수 있다 (Schon and Wiggins, 1992; Gross, 1996; Kurmann, 1998). 최근에 IT 기술이 건축분야에 적용됨에 따라, 건축가들의 전통적으로 고려되어 왔던 인간의 행동, 자연현상, 건축재료, 건축부재, 대지조건 외에 다양한 IT 기술과 관련된 정보를 분석하고 고려할 필요성을 가지게 되었다. 그러나 이러한 다양한 IT 기술은 건축적인 요소들과 접목되어 적용되기 때문에 건축가들은 디자인 초기단계부터 IT 기술의 접목이 가능한 디자인 도구를 필요로 하게 되었다. 즉, 이는 IT 정보와 공간정보와의 관계 및 적용을 건축가가 빠르게 이해하고 분석하고 이를 디자인에 반영할 수 있도록 도와주는 시각적 다이어그램 표출이 가능한 디자인 도구가 필요하게 되었다. 본 논문에서는 다양한 IT 기술과 공간 정보의 다양한 형태의 관계를 나타내는 3 차원 버블 다이어그램을 이용한 계략 디자인 방법을 제안하고, 이를 기반으로 3 차원 버블 다이어그램을 지원하면서 건축 디자인 초기단계에 이용 가능한 디자인 도구를 개발한다. 본 연구에서 개발된 디자인 도구는 정보의 유형에 따라 다양하게 형태를 변화시킬 수 있는 노드(node)와 연결선(edge)로 구성되고, 저장된 특정 건축정보는 다이어그램으로 생성된 디자인 대안을 평가하는데 사용된다. 일종의 DSS(Decision Support System)인 본 시스템은 디자인 초기단계에서 3 차원 디자인 아이디어를 제공할 뿐만 아니라 다양한 디자인 대안을 빠르게 생성하고 이를 실시간으로 평가함으로써 디자인 효율성을 증가시킬 것이다. 본 시스템은 유비쿼터스 기술이 적용된 신도시에 생성될 통관관제센터 디자인에 실험적으로 적용되었다.

• Journal for History of Mathematics
• /
• v.19 no.4
• /
• pp.63-80
• /
• 2006

Along with natural and algebraic languages, schema is a fundamental component of mathematical language. The principal purpose of this present study is to focus on this point in detail. Schema was already in use during Pythagoras' lifetime for making geometrical inferences. It was no different in the case of Oriental mathematics, where traces have been found from time to time in ancient Chinese documents. In schma an idea is transformed into something conceptual through the use of perceptive images. It's heuristic value lies in that it facilitates problem solution by appealing directly to intuition. Furthermore, introducing schema is very effective from an educational point of view. However we should keep in mind that proof is not replaceable by it. In this study, various schemata will be presented from a diachronic point of view, We will show with emaples from the theory of categories, Feynman's diagram, and argand's plane, that schema is an indispensable tool for constructing new knowledge.

• Journal of Fashion Business
• /
• v.27 no.4
• /
• pp.101-114
• /
• 2023

This study aimed to create globally acceptable Hanbok-inspired work uniforms, by developing practical designs and providing useful resources for incorporating Hanbok characteristics into office attire. First, to establish the elements that the Hanbok work uniform should have, the definition and characteristics of service clothes and preferences for the process of modernization of traditional Hanbok were reviewed through a review of the preceding studies. For the Hanbok work uniform design, a total of 4 pieces, 2 for each male and female, were planned, a schematic diagram was created, and the design was modified after evaluation by fashion design experts. I made a pattern of the modified design with a CAD program, imported it into CLO 3D to produce a virtual costume, and confirmed the final design draft. Work uniform design has symbolism, functionality, and aesthetics as its characteristics. The functionality of the Hanbok work uniform designed in this study is suitable for the season, and it was designed to increase the efficiency of work when worn for a long time. The design was focused on the development of materials and patterns in consideration of comfort and activity. The esthetic nature of hanbok-inspired work clothes was intended to reveal details that could highlight the silhouette of the human body and reflect the beauty of hanbok.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.131-134
• /
• 2002

In this work, we have developed a systematic way of utilizing the basic design tools for superconductive electronics. This include WRSPICE, XIC, margin program, and L-meter. Since the high performance analog-to- digital converter can be built with Rapid Single Flux Quantum (RSFQ) logic circuits the development of superconductive analog-to-digital converter has attracted a lot of interests as one of the most prospective area of the application of Josephson Junction technology. One of the main advantages in using Rapid Single Flux Quantum logic in the analog-to-digital converter is the low voltage output from the Josephson junction switching, and hence the high resolution. To design an 1-bit analog-digital converter, first we have used XIC tool to compose a circuit schematic, and then studied the operational principle of the circuit with WRSPICE tool. Through this process, we obtained the proper circuit diagram of an 1-bit analog-digital converter circuit. Based on this circuit we performed margin calculations of the designed circuits and optimized circuit parameters. The optimized circuit was laid out as a mask drawing. Inductance values of the circuit layout were calculated with L-meter. Circuit inductors were adjusted according to these calculations and the final layout was obtained.