• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.211-214
• /
• 1997

This paper applies fuzzy self-tuning PID controller in DS/CDMA cellular system. Power control is essential in DS/CDMA to compensate for the differing received powers due to both the slowly varying long-term and fast varying short-term fading processes and co-channel interference. The controller proposed is adaptable for the variations of the system dynamics and especially for the variable time delay which exists in mobile radio systems. Accordingly the results is the smaller power control error, that is, the smaller average transmitting power of mobile compared with the conventional control schemes. Because interferences to the other mobiles are reduced, the capacity of CDMA can be increased.

• 제어로봇시스템학회논문지
• /
• 제13권6호
• /
• pp.603-608
• /
• 2007

In the conventional AOA(angle-of-arrival) positioning utilizing reverse-link wireless channel, each sensor should be equipped with an array antenna to measure the incident angle of signal transmitting from a tag. To perform the complicated signal processing for angle measurements, sensor size and its power consumption will be large. In some applications like mobile robot location, there exists no strict restriction in tag size or in power consumption. Rather, it is desirable that the sensor would be as small as possible. This paper presents a new AOA positioning method utilizing forward-link channel. Under the assumption that the mobile robot is operating on the flat surface, the measurement model for FLAOA(tiJrward-link AOA) is derived first. Two kinds of position estimation algorithms using FLAOA measurements are proposed; Gauss-Newton method and closed-fonn solution method. With the proposed methods, we can ohtain the attitude of robot as well as its position. Positioning performance of proposed methods is compared by computer simulation. Simulation results show that the closed-form solution method using FLAOA measurements is suitable for indoor robot positioning.

• 전자공학회논문지S
• /
• 제34S권10호
• /
• pp.1-8
• /
• 1997

In this paper, we propose a call admission control scheme which can be used in real environment for the traffic cibtrik if a base station if DS-CDNA cellular systems. The proposed scheme estimates the mean and variance of other cell interference by using the values used for the closed loop power control. The reerse link capacity of the base station can be calculated by using the estimated mean and variance of other cell interference. The base station admits a call only if the number of users is less than the calculated reverse link capacity. In addition, we propose a simple method to obtain the equivalent number of voice call users per one data call user in multi-rate traffic environment. The method can be applied to call admission control in multi-rate traffic environment.

• 한국통신학회논문지
• /
• 제26권12B호
• /
• pp.1677-1685
• /
• 2001

본 논문에서 역방향 DS-CDMA(Direct Sequence-Code Division Multiple Access)에서 요구하는 QoS(Quality of Services)를 보장하기 위한 호 수락 제어를 제안한다 물리적 채널수에 의한 방법과 MODEM (modulator/ demodulator)부분으로부터 수신된 신호의 품질에 기반한 방법이 이미 연구되어졌다. 다른 방법으로, BTS(Base Transceiver Station)에서 수신된 파워 레벨을 사용한 방법과 사용자들의 위치를 통계적으로 분석한 방법으로 그 기준을 정하기도 한다. 이러한 방법들은 시스템의 과부하를 가져올 뿐만 아니라 시간 지연 또는 실제 환경에 적용하는데 큰 어려움이 있다. 이러한 문제를 풀기 위해, 실시간으로 BTS부분의 LNA(Low Noise Amplifier)에서 측정한 값을 기반으로 호 수락 제어를 목적으로 호 절단 추정을 제안한다. 본 논문에서 이러한 방법의 제안은 실시간에서 제공하는 서비스의 품질을 추정하고, 시스템의 부하를 줄이며, 짧은 시간지연을 가질 수 있다. 그러나 BTS에서 호 절단 률을 측정하고 수신 신호의 전력을 측정하기 위해 BTS에서 하드웨어 복잡성이 더해진다.

• 전력전자학회논문지
• /
• 제19권1호
• /
• pp.23-30
• /
• 2014

This paper proposes a single power-conversion ac-dc converter with a dc-link capacitor-less and high power factor. The proposed converter is derived by integrating a full-bridge diode rectifier and a series-resonant active-clamp dc-dc converter. To obtain a high power factor without a power factor correction circuit, this paper proposes a suitable control algorithm for the proposed converter. The proposed converter provides single power-conversion by using the proposed control algorithm for both power factor correction and output control. Also, the active-clamp circuit clamps the surge voltage of switches and recycles the energy stored in the leakage inductance of the transformer. Moreover, it provides zero-voltage turn-on switching of the switches. Also, a series-resonant circuit of the output-voltage doubler removes the reverse-recovery problem of the output diodes. The proposed converter provides maximum power factor of 0.995 and maximum efficiency of 95.1% at the full-load. The operation principle of the converter is analyzed and verified. Experimental results for a 400W ac-dc converter at a constant switching frequency of 50kHz are obtained to show the performance of the proposed converter.

• 한국통신학회논문지
• /
• 제21권5호
• /
• pp.1283-1293
• /
• 1996

This paper descries design concepts, structure and charracteristics of personal communications system based on wideband CDMA under developing for general low-tier mobile telecommunications services as the first step of the next generation mobile telecommunications systems that provide timely exchange of various types of information with anyone, from anywhere, at anytime. Also, wedesign a reverse linktransmitter/receiver structure for personal communications system based on wideband CDMA and validata the performance of the designed structure and establish the each parameter via computer simulation. Simulaation results on the effects of reverse link synchronous transmission and the effects of power control and control and channel coding in pedestrian environment for low-tier services are presented.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.149-152
• /
• 2000

In this paper, the reverse link performance of an imperfect power controlled DS/CDMA cellular system that uses a base station array antenna which can effectively remove the multiple access interference is analyzed considering both beam forming algorithm and power control error in shadowing. The blocking probability of the DS/CDMA cellular system based on array parameters, Eb/No and statistics of interference is derived, and then the system capacity corresponding to a certain blocking probability is calculated. On the assumption that the blocking probability is set 1 ％, the system capacity using MCGM algorithm with 12 antenna arrays is increased about 59 % than that using 8 antenna arrays when power control error is 2.5 ㏈.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2000년도 하계종합학술대회논문집
• /
• pp.61-64
• /
• 2000

본 논문에서는 cdma2000 규격을 채용한 역방향 링크 동기식 DS-CDMA 시스템을 시뮬레이션 하여 시스템의 성능을 분석하려다 cdma2000 시스템은 기존의 IS-95와는 달리 Pilot 채널을 이용하여 페이딩 채널을 추정하고 이를 이용하여 채널 환경에 의한 수신신호의 위상변화를 보상해 준다. 채널 추정필이 31pcg 심볼에서 Pilot 채널과 Traffic 채널의 최적의 전력비를 구하였다. 또한 시스템에 Power Control을 적용하여 Target FER을 만족시키기 위한 required Eb/No를 구하였고, 서로 다른 데이터율의 사용자가 동시에 전송할 때의 성능을 분석하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.480-483
• /
• 2004

This paper, we present the evaluation of outage probability on the SNR under the overlapped carrier allocation scheme in the reverse link with imperfect power control of a cellular CDMA system, which is base on using Gaussian approximation. In numerical results, the band limited pulse generated by square-root of raised consin pulse shaping filters (SRRC) of the transmitted signal is investigated and compared in conventional FD/CDMA and OC-CDMA of the outage probability. It will be also show that the outage probability can be improved by overlapping of carriers. We use error statistics to model the intra-cell interference and evaluate the impact of different mobiles velocity and number of resolvable paths on the system performance.

• 한국정보처리학회논문지
• /
• 제7권10호
• /
• pp.3210-3218
• /
• 2000

IS-95 셀룰라 시스템에서는 다른 역방향 사용자들의 통화로 인한 간섭 레벨(level)이 이미 정해져 있는 레벨 이상이 되었을 때 통화 블럭킹(blocking)이 일어난다. 본 논문에서는 이동 무선채널을 전파음영(shadowing) 채널로 가정하고 불완전 전력제어된 IS-95 셀룰라 시스템의 역방향 링크에 대한 얼랑용량(Erlag capacity)을 산출한다. 블록킹 확률(blocking probability)은 로그노말 근사(lognormal approximation)를 사용하여 유도하고 가우시안 근사와 로그노말 근사의 결과들을 서로 비교 분석한다. 데이터율 $R_b$=9.6kbps 와 $R_b$=14.4kbps에서 1% 블록킹 확률을 가정하면, 로그노말 근사를 사용한 얼랑용량은 각각 13.68 얼랑과 7.08 얼랑으로 가우시안 근사가 약 24,4%와 40.4% 의 근사한 오차를 발생시킨다는 것을 알 수 있다. 또한 전력제어가 완벽하게 된다면 얼랑용량은 전력제어 오차가 2.5㏈인 불완전 전력제어보다 6.99 얼랑과 4.21 얼랑 증가하고, 음성활동율을 40%로 간주하면 음성활동을 고려하지 않은 경우보다 8.21 얼랑과 4.25 얼랑이 각각 증가함을 알 수 있다.