• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.211-214
• /
• 1997

This paper applies fuzzy self-tuning PID controller in DS/CDMA cellular system. Power control is essential in DS/CDMA to compensate for the differing received powers due to both the slowly varying long-term and fast varying short-term fading processes and co-channel interference. The controller proposed is adaptable for the variations of the system dynamics and especially for the variable time delay which exists in mobile radio systems. Accordingly the results is the smaller power control error, that is, the smaller average transmitting power of mobile compared with the conventional control schemes. Because interferences to the other mobiles are reduced, the capacity of CDMA can be increased.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.6
• /
• pp.603-608
• /
• 2007

In the conventional AOA(angle-of-arrival) positioning utilizing reverse-link wireless channel, each sensor should be equipped with an array antenna to measure the incident angle of signal transmitting from a tag. To perform the complicated signal processing for angle measurements, sensor size and its power consumption will be large. In some applications like mobile robot location, there exists no strict restriction in tag size or in power consumption. Rather, it is desirable that the sensor would be as small as possible. This paper presents a new AOA positioning method utilizing forward-link channel. Under the assumption that the mobile robot is operating on the flat surface, the measurement model for FLAOA(tiJrward-link AOA) is derived first. Two kinds of position estimation algorithms using FLAOA measurements are proposed; Gauss-Newton method and closed-fonn solution method. With the proposed methods, we can ohtain the attitude of robot as well as its position. Positioning performance of proposed methods is compared by computer simulation. Simulation results show that the closed-form solution method using FLAOA measurements is suitable for indoor robot positioning.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.10
• /
• pp.1-8
• /
• 1997

In this paper, we propose a call admission control scheme which can be used in real environment for the traffic cibtrik if a base station if DS-CDNA cellular systems. The proposed scheme estimates the mean and variance of other cell interference by using the values used for the closed loop power control. The reerse link capacity of the base station can be calculated by using the estimated mean and variance of other cell interference. The base station admits a call only if the number of users is less than the calculated reverse link capacity. In addition, we propose a simple method to obtain the equivalent number of voice call users per one data call user in multi-rate traffic environment. The method can be applied to call admission control in multi-rate traffic environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12B
• /
• pp.1677-1685
• /
• 2001

In this paper, we propose a call admission control scheme that can be performed within guaranteeing of required QoS(Quality of Services) in DS-CDMA(Direct Sequence-Code Division Multiple Access) reverse link. It has been performed rely on a physical channel numberonly and based on quality of received signal from MODEM(modulator/demodulator) part in established study. In other methods, the standard for services would have been set from statistical analysis of users\` location and using received power level in BTS(Base Transceiver Station). These ways bring about not only system loads but time delay or great differences from real environment. To solve these problems, we propose a call drop rate estimation algorithm for the purpose of call admission control based on measured value at LNA(Low Noise Amplifier) ports of BTS(Base Transceiver Station) in real time. This method proposed in this paper estimates a quality of offered service in real time, reduce system loads and shorten time delay which is needed to determine the standard for call admission control. But it requires a additional 17W complexity which can measure received signal power in BTS and estimate call drop rate.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.1
• /
• pp.23-30
• /
• 2014

This paper proposes a single power-conversion ac-dc converter with a dc-link capacitor-less and high power factor. The proposed converter is derived by integrating a full-bridge diode rectifier and a series-resonant active-clamp dc-dc converter. To obtain a high power factor without a power factor correction circuit, this paper proposes a suitable control algorithm for the proposed converter. The proposed converter provides single power-conversion by using the proposed control algorithm for both power factor correction and output control. Also, the active-clamp circuit clamps the surge voltage of switches and recycles the energy stored in the leakage inductance of the transformer. Moreover, it provides zero-voltage turn-on switching of the switches. Also, a series-resonant circuit of the output-voltage doubler removes the reverse-recovery problem of the output diodes. The proposed converter provides maximum power factor of 0.995 and maximum efficiency of 95.1% at the full-load. The operation principle of the converter is analyzed and verified. Experimental results for a 400W ac-dc converter at a constant switching frequency of 50kHz are obtained to show the performance of the proposed converter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.5
• /
• pp.1283-1293
• /
• 1996

This paper descries design concepts, structure and charracteristics of personal communications system based on wideband CDMA under developing for general low-tier mobile telecommunications services as the first step of the next generation mobile telecommunications systems that provide timely exchange of various types of information with anyone, from anywhere, at anytime. Also, wedesign a reverse linktransmitter/receiver structure for personal communications system based on wideband CDMA and validata the performance of the designed structure and establish the each parameter via computer simulation. Simulaation results on the effects of reverse link synchronous transmission and the effects of power control and control and channel coding in pedestrian environment for low-tier services are presented.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.149-152
• /
• 2000

In this paper, the reverse link performance of an imperfect power controlled DS/CDMA cellular system that uses a base station array antenna which can effectively remove the multiple access interference is analyzed considering both beam forming algorithm and power control error in shadowing. The blocking probability of the DS/CDMA cellular system based on array parameters, Eb/No and statistics of interference is derived, and then the system capacity corresponding to a certain blocking probability is calculated. On the assumption that the blocking probability is set 1 ％, the system capacity using MCGM algorithm with 12 antenna arrays is increased about 59 % than that using 8 antenna arrays when power control error is 2.5 ㏈.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.61-64
• /
• 2000

본 논문에서는 cdma2000 규격을 채용한 역방향 링크 동기식 DS-CDMA 시스템을 시뮬레이션 하여 시스템의 성능을 분석하려다 cdma2000 시스템은 기존의 IS-95와는 달리 Pilot 채널을 이용하여 페이딩 채널을 추정하고 이를 이용하여 채널 환경에 의한 수신신호의 위상변화를 보상해 준다. 채널 추정필이 31pcg 심볼에서 Pilot 채널과 Traffic 채널의 최적의 전력비를 구하였다. 또한 시스템에 Power Control을 적용하여 Target FER을 만족시키기 위한 required Eb/No를 구하였고, 서로 다른 데이터율의 사용자가 동시에 전송할 때의 성능을 분석하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.480-483
• /
• 2004

This paper, we present the evaluation of outage probability on the SNR under the overlapped carrier allocation scheme in the reverse link with imperfect power control of a cellular CDMA system, which is base on using Gaussian approximation. In numerical results, the band limited pulse generated by square-root of raised consin pulse shaping filters (SRRC) of the transmitted signal is investigated and compared in conventional FD/CDMA and OC-CDMA of the outage probability. It will be also show that the outage probability can be improved by overlapping of carriers. We use error statistics to model the intra-cell interference and evaluate the impact of different mobiles velocity and number of resolvable paths on the system performance.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.10
• /
• pp.3210-3218
• /
• 2000

In a IS-95 cellular systm, blocking will occur when the reverse link user interference power reaches a predepermmed level which is set to maintam acceptable signal quality. In this paper, it is assumed that a mobile rdio channel is a shadowing channel and Erlang capacity is calculated for the reverse limk of an imperfect power controlled IS-95 cellular system. the blocking probability is derived using lognornal pproximation and the results according to guassian and lognormal approximation method are compared and analyzed respcctively. Assuming that blocking probability is 1% at the data rate of $R_b$=9.6kbps and $R_b$=14.4kbps, it is shown that Erlang capacity using Iognormal approximation is 13.68 Erlang and 7.08 Erlang and then the approximation erroris occurred about 24.4% and 40.4% inthe garssian approximation, respectively. It is also observed that if the power control becomes periect, the Erlang capacity is increased more 6.99 and 4.21 Erlang than that of the imperfect power control that the power contrl error is 2.5dB, and if voice activity is considered as 10%, the Erlang capacity is increased more 8.21 and 1.25 Erlang than that using non voice activity, respectively.