• 한국군사과학기술학회지
• /
• 제14권4호
• /
• pp.622-629
• /
• 2011

In this paper, you can see the structure of data slaving software module that is in use on flight test and result of the test with the slaving. The data slaving software module has many functions, data slaving for various instrumentation systems(instrumentation radars, telemetry systems for missile, aircraft and so on), setting some slaving group for multi-target, communicating with the instrumentation systems in a far away site and sending a specific value as slaving data. This fits the requests for flight test that is being performed and improves performance of the instrumentation systems.

• 한국식품저장유통학회지
• /
• 제9권2호
• /
• pp.137-143
• /
• 2002

Temperature and humidity are the most important factors and should be effectively controlled for the cold storage of graius. Fuzzy logic can be easily implemented to the MIMO(Multi-Input Multi-Output) control systems. For the cold storage in grain bin, fuzzy logic was applied to an air conditioning system. The capacities of the grain bin and the air conditioner are 80 tons and 30㎾, respectively. Also, the target values of temperature and relative humidity in outlet duct of the air conditioner were 8$\^{C}$ and 75%, respectively. In order to control temperature and relative humidity of air, a damper in inlet duct was manipulated for temperature control and a heater was used for humidity control. Temperature deviation and change of temperature deviation were used as input parameters for the fuzzy system. Humidity was only considered as a load. The experimental results showed that the controlled temperature of exhausted air was maintained at 8$\pm$2$\^{C}$. Relative humidity of the air was also controlled at the target relative humidity of 50∼80%.

• Journal of Korean Vacuum Science & Technology
• /
• 제2권2호
• /
• pp.92-96
• /
• 1998

Ferroelectric Bi-layered oxides SrBi2Ta2O9 (SBT) thin films have been deposited on Pt/Ti/SiO2/Si substrates using multi-target sputtering. Structure, composition, and electrical properties have been investigated on films. The SBT films were deposited with the various bismuth sputtering powers. The SBT films deposited with the bismuth sputtering power of 20 W have the most dense microstructure and the remanent polarization (Pr) of 9.2 ${\mu}$C/cm and the coercive field (Ec) of 43.8 kV/cm at an applied voltage of 5V. The SBT films deposited with the bismuth sputtering power of 20W showed a fatigue-free characteristics up to 1.0${\times}$1010 cycles under 5V bipolar pulse and a leakage current density of 2.0${\times}$10-8 A/$\textrm{cm}^2$ at 200 kV/cm.

• 한국전산구조공학회논문집
• /
• 제23권6호
• /
• pp.579-592
• /
• 2010

This paper presents a multi-phase model update approach for system identification of prestressed concrete (PSC) girders under various prestress forces. First, a multi-phase model update approach designed on the basis of eigenvalue sensitivity concept is newly proposed. Next, the proposed multi-phase approach is evaluated from controlled experiments on a lab-scale PSC girder for which forced vibration tests are performed for a series of prestress forces. On the PSC girder, a few natural frequencies and mode shapes are experimentally measured for the various prestress forces. The corresponding modal parameters are numerically calculated from a three-dimensional finite element (FE) model which is established for the target PSC girder. Eigenvalue sensitivities are analyzed for potential model-updating parameters of the FE model. Then, structural subsystems are identified phase-by-phase using the proposed model update procedure. Based on model update results, the relationship between prestress forces and model-updating parameters is analyzed to evaluate the influence of prestress forces on structural subsystems.

• 전기전자학회논문지
• /
• 제8권1호
• /
• pp.39-46
• /
• 2004

본 논문에서는 확장성을 갖는 다목적 코히어런트 모노펄스 레이더 시뮬레이터를 구현 하였다. 실제 목표물이 존재하지 않는 실내 환경에서 운영 가능토록 안테나의 기계적인 회전신호, 펄스 레이더의 운용타이밍 신호 및 표적신호 연구를 통해 이를 모의할 수 있는 TSG(Timing Signal Generator)보드를 개발하여 시뮬레이터에 탑재 하였다. 또한 레이더 기능 알고리듬의 추가나 운용 시나리오 변경에 의한 하드웨어 재구성이나 확장이 용이하도록 다중 DSP 구조의 프로그램 가능한 레이더 신호처리기를 내장 하였다. 모의실험을 통하여, 구현된 코히어런트 모노 펄스 레이더 시뮬레이터가 실제 사용 중인 레이더 전시기(RD9800)상에 움직이는 목표물의 궤적을 정확하게 지시해 주는 것을 확인할 수 있음을 보였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.402-403
• /
• 2006

This research aims to develop the multiple channel electrochemical DNA chip using microfabrication technology. At first, we fabricated a high integration type DNA chip array by lithography technology. Several probe DNAs consisting of thiol group at their 5-end were immobilized on the gold electrodes. Then target DNAs were hybridized and reacted. Cyclic voltammetry showed a difference between target DNA and control DNA in the anodic peak current values. Therefore, it is able to detect a plural genes electrochemically after immobilization of a plural probe DNA and hybridization of non-labeling target DNA on the electrodes simultaneously. It suggested that this DNA chip could recognize the sequence specific genes.

• 전자공학회논문지B
• /
• 제33B권6호
• /
• pp.186-197
• /
• 1996

A multiple target tracking (MTT) problem is to track a number of targets in clusttered environment, where measurements may contain uncertainties of measurement origin due to clutter, missed detection, or other targets, as well as measurement noise errors. Hence, an MTT filter should be introduced to resolve this problem. In this paper, a neural network is rpoposed as an MTT filter.

• Transactions on Control, Automation and Systems Engineering
• /
• 제2권2호
• /
• pp.136-139
• /
• 2000

A neural controller for process control is proposed that combines a conventional multi-loop PID controller with a neural network. The concept of target signal based on feedback error is used for on-line learning of the neural network. This controller is applied to distillation column control to illustrate its effectiveness. The result shows that the proposed neural controller can cope well with disturbance, strong interactions, time delays without any prior knowledge of the process.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권9호
• /
• pp.2458-2482
• /
• 2023

Medical image segmentation techniques based on convolution neural networks indulge in feature extraction triggering redundancy of parameters and unsatisfactory target localization, which outcomes in less accurate segmentation results to assist doctors in diagnosis. In this paper, we propose a multi-level semantic-rich encoding-decoding network, which consists of a Pooling-Conv-Former (PCFormer) module and a Cbam-Dilated-Transformer (CDT) module. In the PCFormer module, it is used to tackle the issue of parameter explosion in the conservative transformer and to compensate for the feature loss in the down-sampling process. In the CDT module, the Cbam attention module is adopted to highlight the feature regions by blending the intersection of attention mechanisms implicitly, and the Dilated convolution-Concat (DCC) module is designed as a parallel concatenation of multiple atrous convolution blocks to display the expanded perceptual field explicitly. In addition, MultiHead Attention-DwConv-Transformer (MDTransformer) module is utilized to evidently distinguish the target region from the background region. Extensive experiments on medical image segmentation from Glas, SIIM-ACR, ISIC and LGG demonstrated that our proposed network outperforms existing advanced methods in terms of both objective evaluation and subjective visual performance.

• 한국군사과학기술학회지
• /
• 제13권4호
• /
• pp.673-682
• /
• 2010

This paper describes and analyzes a various generation methods of the mutually orthogonal polyphase sequences with low cross-correlation peak sidelobe and low autocorrelation peak sidelobe levels. The mutual orthogonality is the key requirement of multi-static or MIMO(Multi-Input Multi-Output) radar systems which provides the good target detection and tracking performance. The polyphase sequences, which are generated by SA(Simulated Annealing) and GA(Genetic Algorithm), have been analyzed with ACF(Autocorrelation Function) PSL(Peak Sidelobe Level) and CCF(Crosscorrelation Function) level at the matched filter output. Also, the ambiguity function has been introduced and simulated for comparing Doppler properties of each sequence. We have suggested the phase selection rule for applying multi-static or MIMO systems.