• Journal of Power Electronics
• /
• 제9권5호
• /
• pp.757-771
• /
• 2009

This paper proposes a systematic approach to the modeling of the small-signal characteristics of three-phase bridge boost rectifiers under non-sinusoidal conditions. The main obstacle to the conventional synchronous d-q frame modeling approach is that it is unable to identify a steady-state under non-sinusoidal conditions. However, for most applications under non-sinusoidal conditions, the current loops of boost rectifiers are designed to have a bandwidth that is much higher than typical harmonics frequencies in order to achieve good current control for these harmonic components. Therefore a quasi-static method is applied to the proposed modeling approach. The converter small-signal characteristics developed from conventional synchronous frame modeling under different operating points are investigated and a worst case point is then located for the current loop design. Both qualitative and quantitative analyses are presented. It is observed that operating points influence the converter low frequency characteristics but hardly affect the dominant poles. The relationship between power stage parameters, system poles and zeroes is also presented which offers good support for the system design. Both the simulation and experimental results verified the analysis and proposed modeling approach. Finally, the practical case of a parallel active power filter is studied to present the modeling approach and the resultant regulator design procedure. The system performance further verifies the whole analysis.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• 제25권4호
• /
• pp.61-68
• /
• 2002

This paper provides a method of consciousness structure analysis for research and development project evaluation using fuzzy structure modeling(FSM). Fuzzy structure modeling, which is a modeling method for consciousness structure, has a large number of pairwise comparison by human subjective judgement and is difficult to check the consistency index of denoting the precision for human judgement. Thus, in this paper, we analyzed the structure of consciousness by fuzzy structural modeling method, introducing the concept of pairwise comparison matrix in Analytic Hierarchy Process.

• Korean Journal of Computational Design and Engineering
• /
• 제12권4호
• /
• pp.283-297
• /
• 2007

Seamless data integration in the CAx chain of the CAD/CAPP/CAM/CNC has been achieved to a high degree, but research concerning the transfer of data from conceptual sketches to a CAD system should be carried out further. This paper presents a method for reconstructing a 3D model from a freehand sketch. Sketch-based modeling research can be classified into gestural modeling methods and reconstructional modeling methods. This research involves the reconstructional modeling method. Here, Mitani's seminal work, designed for box-shaped 3D model using a predefined template, is improved by leveraging a relational template and specialized for automotive design. Matching between edge graphs of the relational template and the sketch is formulated and solved as the assignment problem using the feature vectors of the edges. Including the stroke preprocessing method required to generate an edge graph from a sketch, necessary procedures and relevant techniques for implementing the template-based modeling method are described. Examples from a working implementation are given.

• Journal of the Korean Geographical Society
• /
• 제39권3호
• /
• pp.444-456
• /
• 2004

Recently spatial modeling that combined GIS and Cellular Automata(CA) which are based on dynamic process modeling has been discussed and investigated. However, CA-based spatial modeling in previous research only provides the general modeling framework and environment, but lacks of providing simulation or transition rules for modeling. This study aims to propose a methodology for extracting spatial relation rules using GIS and Knowledge Discovery in Database(KDD) methods. This new methodology has great potentials to improve CA-based spatial modeling and is expected to be applied into several examples including urban growth simulation modeling.

• Korean Journal of Computational Design and Engineering
• /
• 제5권4호
• /
• pp.301-311
• /
• 2000

For effective part modifications which is necessary in the design process frequently, variational geometric modeling with constraint management being used in a wide. Most variational geometric modeling methods, however, manage just the constraints about sketch elements used for generation of primitives. Thus, not only constraint propagation but also re-build of various modeling operations stored in the modeling history is necessary iota part geometry modifications. Especially, re-build of high-cost Boolean operations is apt to deteriorate overall modeling efficiency abruptly. Therefore, in this paper we proposed an algorithm that can handle all geometric entities of the part directly. For this purpose, we introduced eight type geometric constraints to the various geometric calculations about all geometric entities in sweepings and Boolean operations as well as the existing constraints of the sketch elements. The algorithm has a merit of rapid part geometric modifications through only constraint propagation without rebuild of modeling operations which are necessary in the existing variational geometric modeling method.

• IE interfaces
• /
• 제8권3호
• /
• pp.61-73
• /
• 1995

As the level of maunfacturing system automation increases, the issues of modeling and simulation of AMS(Automated Manufacturing System) are becoming more important. Proposed in this paper is the JR-Net(Job Resource relation-Net) modeling framework which naturally mimics the process of designing an AMS by FA(Factory Automation) engineers. Its main purpose is to provide a modeling tool which facilitate modeling work of AMS for FA engineers unfamiliar with simulation modeling. The proposed modeling scheme is based on the extensive observation that typical AMSs are built from the set of 'standard' components(or catalog items). As an application of the proposed model, two real examples of FMS('G7'FMS model plant, RPI FMS) are modeled by JR-Net, and in case of FMS model plant, a simulation program development procedure using JR-Net modeling results is explained. Finally, simulation result of FMS model plant is analyzed.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.2017-2032
• /
• 2018

This study presents, for the first time, state-of-the art review of the various techniques for the modeling of the electrostatic discharge (ESD) generators for the ESD analysis and testing. After a brief overview of the ESD generator, the study provides an in-depth review of ESD generator modeling (analytical, circuit and numerical modeling) techniques for the contact discharge mode. The proposed techniques for each modeling approach are compared to illustrates their differences and limitations.

• Journal of the Korea Convergence Society
• /
• 제9권11호
• /
• pp.137-143
• /
• 2018

DICOM images of patellofemoral bones were converted into a stereolithography file, and a Unigraphics CAD program was used to create a CAD modeling in which there exists point, line and facet information. The modeling extraction of joint facets was performed by linking two adjacent points into lines in the stereolithography file by using the Unigraphics rapid spacing function and then linking the lines into facets to complete the entire modeling. This modeling extraction was performed based on the anatomical knowledge of joint facet directions. As a result, a personalized space modeling and solid modeling were produced for the joint facets of patellofemoral bones. This was followed by a CAM control computing operation of solid modeling on graphite materials and 5-axis machining of patellofemoral bones. That is the description of a method for a personalized implant modeling by using DICOM images of patellofemoral bones.

• Journal of Korean Society on Water Environment
• /
• 제36권6호
• /
• pp.636-650
• /
• 2020

A modeling system that can consider the overall water environment and be used to integrate hydrology, water quality, and aquatic ecosystem on a watershed scale is essential to support decision-making in integrated water resources management (IWRM). In adapting imported models for evaluating the unique water environment in Korea, a platform perspective is becoming increasingly important. In this study, a modeling platform is defined as an ecosystem that continuously grows and provides sustainable values through voluntary participation- and interaction-of all stakeholders- not only experts related to model development, but also model users and decision-makers. We assessed the conceptual values provided by the IWRM modeling platform in terms of openness, transparency, scalability, and sustainability. I We also reviewed the technical aspects of functional and spatial integrations in terms of socio-economic factors and user-centered multi-scale climate-forecast information. Based on those conceptual and technical aspects, we evaluated potential modeling platforms such as Source, FREEWAT, Object Modeling System (OMS), OpenMI, Community Surface-Dynamics Modeling System (CSDMS), and HydroShare. Among them, CSDMS most closely approached the values suggested in model development and offered a basic standard for easy integration of existing models using different program languages. HydroShare showed potential for sharing modeling results with the transparency expected by model user-s. Therefore, we believe that can be used as a reference in development of a modeling platform appropriate for managing the unique integrated water environment in Korea.

• ETRI Journal
• /
• 제37권1호
• /
• pp.175-185
• /
• 2015

This paper presents a system-of-systems (SoS) approach to the formal modeling of a cyber-physical system (CPS) for simulation-based analysis. The approach is based on a convergence technology for modeling and simulation of a highly complex system in which SoS modeling methodology, hybrid systems modeling theory, and simulation interoperation technology are merged. The methodology maps each constituent system of a CPS to a disparate model of either continuous or discrete types. The theory employs two formalisms for modeling of the two model types with formal specification of interfaces between them. Finally, the technology adapts a simulation bus called DEVS BUS whose protocol synchronizes time and exchange messages between subsystems simulation. Benefits of the approach include reusability of simulation models and environments, and simulation-based analysis of subsystems of a CPS in an inter-relational manner.