• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2753-2758
• /
• 2003

Tactile sensation is essential for many manipulation and exploration tasks not only in a real environment but also in a virtual environment. In this paper, we discuss a conceptual design of an integrated tactile display system. The system comprises two parts: a 2 DOF force feedback device for kinesthetic display and a tactile feedback device for displaying the normal stimulation to skin and the skin slip/stretch. Psychophysical experiments measure the effects of fingerpad selection, the direction of finger movements and the texture width on tactile sensitivity. We also investigate characteristics of lateral finger movement while subjects perceive different textures. From the experimental results, the principal parameters for designing a tactile display are suggested. A tactile display device is implemented using eight piezoelectric bimorphs and a linear actuator, and is attached to a 2 DOF translational force feedback device to simultaneously simulate texture and stiffness of the object.

• 감성과학
• /
• 제5권4호
• /
• pp.45-49
• /
• 2002

가상환경시스템은 매우 현실감 있는 정보를 제공할 수 있다는 점에서 산업, 의료, 교육훈련 등에 널리 사용되고 있다. 그러나 아직 많은 가상환경 시스템에서 부정적 요인으로 멀미, 시각피로, 방향감각 상실로 대표되는 cybersickness중세를 수반하고 있어 그 사용과 확산에 제약이 되고 있다. 이러한 cybersickness문제에 대응하기 위해서는 우선 이것을 객관적으로 측정, 평가할 수 있는 방법의 개발이 필요하다. 이러한 방법들 중의 하나로 신체동요의 정도를 평가 지표로 사용할 수 있다. 이번 연구에서는 45 명의 피실험자들을 대상으로 가상현실 운전시뮬레이터를 운전하기 전과 후의 신체동요 정도를 힘판(force platform)을 이용해 측정하였다. 특히 본 실험에 사용된 가상현실 운전시뮬레이터는 피실험자에게 운동판(motion platform)을 이용해 운동감을 제공할 수 있었고, 피실험자의 멀미 현상이 검지되면, 시야각을 1/3로 줄여주는 멀미 완화 피드백(feedback) 시스템이 연결되어 있었다. 그래서 motion의 제공여부와 feedback의 제공 여부도 실험의 독립변수로 추가하였다. 실험 결과, 가상현실 체험 후 유의한 차이는 아니나 피실험자들의 신체동요가 약간 증가하는 것이 관측되었다. motion과 feedback에 대한 분석에서는, 유일하게 motion을 제공하는 것이 제공 안할 때에 비해 좌우 방향의 신체동요가 더 적어지는 것으로 나타났다. 신체동요를cybersickness의 지표로 사용하기 위해서는 추후연구가 더 요청된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 춘계학술대회 논문집
• /
• pp.369-373
• /
• 1992

Force control of a planar two-link structurally flexible robotic manipulator is considered in this study. The dynamic model is obtained by using the extended Hamilton's principle and the Galerkin criterion. A method is pressented toobtain the linearized equations of motion in Cartesian space for use in designing the control system. The approachto solving the control problem is to use feedforward and feedback control torques. The feedforward torques maneuver the flexible manipulatro along a nominal trajectory and the feedback torques minimize any deviations from the nominal trajectory. The linear quadratic Gaussian/loop transfer recovery (LQG/LTR) design methodology is explotied to design a robust feedback control system that can handle modeling errors and sensor noise, and operates on Cartesian space trajectory errors. The Lqg/LTR compenstaor together with a feedforward ollp is used to control the flexible manipulator. Simulated results are presented for a numerical example.

• 한국시스템다이내믹스연구
• /
• 제10권1호
• /
• pp.97-107
• /
• 2009

In this paper, a structural similarity between traditional oriental philosophy and systems thinking is discussed. The polarity of causal relationship and feedback loops can be interpreted in terms of yin and yang of oriental philosophy. A positive feedback loop which is linked to the yang is a force or mechanism that accelerates changes in systems. A negative feedback loop which is linked to the yin can be interpreted as a force oppressing any changes. In this sense, systems thinking can be related to the oriental philosophy. With this linking pin between them, systems thinking can be introduced and educated more friendly in oriental society. Furthermore, systems thinking can get a set of rich insights from the oriental philosophy. This paper suggests a linking leverage between systems thinking and oriental philosophy.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.721-724
• /
• 2000

This paper has been demonstrated to be essential to successful telemanipulator control when the communication delay between master arms in the operator control station and telemanipulators in the remote site. This paper includes the human dynamics to generate a control command, the monitoring force feedback in order to robust under short time delays and the controller not to requre the derivative of interaction forces. Simulation results suggest that, the proposed control system should be superior to conventional systems in terms of performance and robustness under short time delays.

• 유공압시스템학회논문집
• /
• 제1권3호
• /
• pp.14-19
• /
• 2004

The Direct Drive Valve used in this study contains a pressure-feedback-loop in itself, then it can eliminate nonlinearity such as the square-root-term in flow rate calculation and the change of bulk modulus of hydraulic oil. In this study, assuming that the dynamic characteristic of the DDV is modelled as a first order lag system, an parameter identification method using the input data and the output data is applied to obtain DDV's mathematical model. Then, a state feedback controller was designed to implement the force control of hydraulic system, and the control performance was evaluated.

• Structural Engineering and Mechanics
• /
• 제12권6호
• /
• pp.633-656
• /
• 2001

In this paper, modal control with direct output feedback is formulated in a systematic manner for easy implementation. Its application to the seismic protection of structural systems is verified by a shaking table test, which involves a full-scale building model and an active bracing system as the control device. Two modal control cases, namely, one full-state feedback and one direct output feedback control were tested and compared. The experimental result shows that in mitigating the seismic response of building structures, modal control with direct output feedback can be as effective and efficient as that with full-state feedback control. For practical concerns, the control performance of the proposed method in the presence of sensor noise and stiffness modeling error was also investigated. The numerical result shows that although the control force may be increased, the maximum floor displacements of the controlled structure are very insensitive to sensor noise and modeling error.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1134-1136
• /
• 1996

A necessary and suficient conditions is proposed for feedback linearizable SISO systems with unknown constant parameters. It is shown that the systems which satisfy the proposed conditions can be transformed into a controllable linear system with unknown parameter and it can be stabilized using the nonlinear feedback linearizing controller. We also present the analysis and implementation of a nonlinear feedback linearizing control for an Electro-Magnetic Suspension (EMS) system. We show that an EMS system is nonlinear feedback linearizable and satisfies the proposed conditions, and hence that the proposed nonlinear feedback controller for an EMS system is robust against mass parameter perturbation and force disturbance.

• 한국정밀공학회지
• /
• 제19권3호
• /
• pp.137-143
• /
• 2002

This paper presents the In-process compensation to control cutter runout and improve the machined surface quality. Cutter runout compensation system consists of the micro-positioning servo system with piezoelectric actuator which is embeded in the sliding table to manipulate radial depth of cut in real-time. Cutting force feedback control was proposed in the angle domain based upon repetitive learning control strategy to eliminate chip load variation in end milling process. Micro-positioning control due to adaptive actuation force response improves the machined surface quality by compensation runout effect induced cutting force variation. This result will provide lots of information to build-up the preciswion machining technology.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권5호
• /
• pp.581-588
• /
• 2002

A fuzzy learning control algorithm is proposed in this paper. In this method, two fuzzy controllers are used as a feedback and a feedforward type. The fuzzy feedback controller can be designed using simple knowledge for the controlled system. On the other hand, the fuzzy feedforward controller has a self-organizing mechanism and therefore, it does not need any knowledge in advance. The effectiveness of the proposed algorithm is demonstrated by experiment on the position and force control problem of a parallelogram type robot manipulator with two degrees of freedom. It is shown that the rapid learning and the robustness can be achieved by adopting the proposed method.