• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.8
• /
• pp.1298-1310
• /
• 1997

In recent years, grinding techniques for precision machining of brittle materials used in electric, optical and magnetic parts have been improved by using superabrasive wheel and precision grinding machine. The completion of optimum dressing of superabrasive wheel makes possible the effective precision grinding of brittle materials. However, the present dressing system cannot have control of optimum dressing of the superabrasive wheel. In this study, a new system and the grinding mechanism of optimum in-process electrolytic dressing were proposed. This system can carry out optimum in-process dressing of superabrasive wheel, and give very effective control according to unstable current and gap increase. Therefore, the optimum in-process electrolytic dressing is a good method to obtain the efficiency and mirror-like grinding of brittle materials.

• Journal of the Korean Home Economics Association
• /
• v.40 no.6
• /
• pp.21-37
• /
• 2002

The third sex implying a mismatch between sex and gender has been regarded as an extreme socio-cultural violation. In its earlier version, such a violation was expressed by cross-dressing; Women's cross-dressing was thought to invoke eroticism, while men's cross-dressing was considered comic or delinquent. However, as feminism developed more with the homosexual identity expressed openly, the third sex began to be visual. Thus, in 1990's, some homosexual monies began to develop to be pluralized enough to suggest the third sex and thereby, change the negative sex into a positive one. In this study, such a pluralization is discussed in terms of invisibility, dichotomy and androgyny. The cross-dressing movies show females in male attire or males in female attire to reflect the third sex. The cross-dressing may be divided into men's playful cross-dressing, women's political cross-dressing and homosexuals'cross-dressing or 'drag'. Gender identity is not an attribute fixed by some physical characteristics, but it tends to be changed or expanded by some social factors over time. In short, it may be a flexible, plural, individual and self-introspective attribute. Movies present diverse types of gender identities, and in particular, the movie costumes specify them. In other words, the costumes may be model means expressing the gender identities, and the gender identities shown in the movies tend to be imitated, re-created or assumed by the audience.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.2 no.2
• /
• pp.217-225
• /
• 1978

This study investigated the relationship between ego identity within the framework of Erikson's psychosocial theory of ego development and self-perceptions of dressing competence and dressing conformity. The following problems have been investigated in this study. 1. The relationship between ego identity and self-perceptions of dressing competence. 2. The relationships between the subcategories of identity levels and self-perceptions of dressing competence. 3. The relationship between ego identity and self-perceptions of dressing conformity. Data were obtained from 242 freshman and 156 senior college students, who each received an ego identity scale and self-perceptions of dressing competence and dressing conformity scale. The statistical analyses of the obtained data included calculation of the Chi-Square ($X^2$) and Means (M). This study's finding were as follows; 1. A significant positive relationship was found between ego identity level and self-perceptions of dressing competence. 2. Significant relationships were found between most of the subcategories of ego identity level and self-perceptions of dressing competence, the exceptions being stability, uniqueness, sense of self. 3. Significant relationships were not found between ego identity and self-perceptions of dressing conformity but were found to be significantly related uniqueness and self assertiveness on one hand were found to be significantly related to self-perceptions of dressing individuality and stability on the other hand to self-perceptions of dressing conformity.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.196-202
• /
• 1998

Recently, developments in the frontier industry have brought a rapid increase in the use of brittle materials such as silicon wafer, ferrite, sintered carbide, MgO single crystal and die steel. Because of high hardness and brittleness the cracking and chipping are apt to generate in the grinding of brittle materials, but have replaced gradually the high precision grinding. In this study, the optimum system of in-process electrolytic dressing controlled by computer was developed for improving the defects, and could maintain the optimum dressing condition at all times. The control of in-process dressing was simplified using this system, was able to maintain a stable dressing current and was unrelated to the change of dressing condition according to the variation of gap and oxide layer. Therefore, the optimum in-process electrolytic dressing system was constructed and the analysis of grinding mechanism with this system was studied.

• Journal of dental hygiene science
• /
• v.23 no.1
• /
• pp.29-38
• /
• 2023

Background: The purpose of this study was to investigate the effect of salad dressings on the flowable composite resin surface and the erosion-inhibitory effect of calcium. Methods: The experiment included six groups: oriental dressing, balsamic dressing, lemon-garlic dressing, lemon-garlic dressing supplemented with 3% calcium, mineral water as a negative control group, and orange juice as a positive control group. pH and titratable acidity were measured. The prepared specimens were immersed in the experimental solutions for 1, 3, 5, 15, and 30 minutes. The surface microhardness was measured using the Vickers hardness number before and after the treatment, and the surface of the specimens was observed using a scanning electron microscope (SEM). Results: The pH values of the experimental groups in increasing order were as follows: lemon-garlic dressing (2.49±0.03), balsamic dressing (3.12±0.06), lemon-garlic dressing +3% calcium (3.27±0.09), oriental dressing (3.75±0.03), orange juice (3.82±0.02), and mineral water (7.32±0.16). The largest surface hardness reduction value was shown in lemon-garlic dressing (-9.61±1.16), followed by balsamic dressing (-9.17±1.63), oriental dressing (-8.62±1.09), orange juice (-8.19±1.36), lemon-garlic dressing +3% calcium (-6.76±1.23), and mineral water (-1.63±2.47). According to the SEM findings, the experimental and positive control groups showed rough surfaces and micropores, whereas the negative control group showed a smooth surface. Moreover, the lemon-garlic dressing with +3% calcium showed fewer micropores and a smoother surface than the lemon-garlic dressing. Conclusion: The intake of salad dressings at a low pH could weaken the surface microhardness of the flowable composite resin. However, adding calcium to these salad dressings can reduce the risk of microhardness reduction on the flowable composite resin surface.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.108-113
• /
• 2005

In this study, rotary type diamond dressing system for ultra-precision centerless grinding for ferrule was developed at the first time and experiments were conducted with AE sensor and hall sensor system to verify the optimum dressing condition for ultra-precision centerless grinding for ferrule. The correlations with the condition of dressing are evaluated by AE signal analysis with root mean square (RMS) and frequency analysis. And current signals from hall sensor are also studied as a factor of dressing optimum condition selection. Dressing process was conducted to investigate the effects of depth of cut, rotating speed, and the number of overlap to select the optimum condition of rotary dressing system of ultra-precision centerless grinding machine for ferrule fabrication. In order to verify the optimum condition of dressing, AE and current signals were compared with the surface quality of dressing wheel and grinding wheel for ultra-precision ferrule grinding. All of these experiments were completed by Taguchi Methodology to reduce experimental time. Hence, the optimum condition of rotary dressing system for ultra-precision centerless grinding for ferrule fabrication can be selected following to the experiment result from signals of AE and hall sensor.

• Archives of Plastic Surgery
• /
• v.32 no.5
• /
• pp.607-612
• /
• 2005

A traditional tie-over dressing may be applied to support the take of a skin graft. Although there are many advantage of this method, it has significant disadvantages, including time-consuming application. Furthermore, when the dressing is changed, the gauze becomes hard and can be stuck to the graft, causing damage and pain upon removal. The purpose of our study is to evaluate the effect of semi-occlusive dressing using polyurethane foam and film dressing($Allevyn^{(R)}$, $Opsite^{(R)}$) after full thickness skin graft. The authors treated 45 cases including burn scar contracture(n=38), syndactyly (n=1), absence of nipple-areolar complex(n=4), traumatic skin defect(n=1) and contact burn(n=1) with authors' method and 39 patients including burn scar contracture (n=39) with the tie-over dressing between 2000 and 2004. The patients in polyurethane foam and film dressing group ranged from 1 to 62 years of age (mean age, 15.1 years) and the patients in tie-over dressing group ranged from 2 to 60 years of age(mean age, 21.3 years). The postoperative results were analyzed according to the following measures: (1) the duration of graft-taking, (2) the admission period, (3) complications. Compared with the traditional tie-over dressing, polyurethane foam and film dressing was shown to be more successful in a reduced duration of graft-taking, in which was similar to the former in the rate of graft-taking, a reduced admission period and patient's discomfort. We concluded that semi-occlusive dressing using $Allevyn^{(R)}$ and $Opsite^{(R)}$ was an effective method after full thickness skin graft, which was easy to shape to difficult body locations, such as web spaces, fingers and maintains a moist environment for wound healing and does not stick to the wound.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.10a
• /
• pp.25-30
• /
• 1997

In recent years, grinding techniques for precision machining of astainless steel used in shaft, screw parts and clear value have been improved by using superabrasive wheel and precision grinding machine. The completion of optimum dressing of superabrasive wheel makes possible the effective percision grinding of stainless steel. However, the present dressing system cannot have control of optimum dressing of the superabrabive wheel. In this study, a new system and the grinding mechanism of optimum in-process electrolytic dressing were proposed. This system can carry out optimum in-process dressing of superabrasive wheel. Therefore, the optimum in-process electrolytic dressing is a good method to obtain the efficiency and mirror-like grinding of stainless steel(SUS304).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.7 no.2
• /
• pp.27-35
• /
• 1983

The main purposes of the study were to explore the relationships among the feelings of clothing deprivation, dressing for self, dressing for others, and self-acceptance, and to deter-mine the differences. of the variables by age and socioeconomic status. The results were as follows: 1. There were significant relationships between feelings of clothing deprivation and dressing for self. Positive significant relationships were found between feelings of clothing deprivation and dressing for others, and between dressing for self and dressing for others. 2. There was a negative significant relationship between self-acceptance and feelings of clothing deprivation, while a positive significant relationship was found between self-acceptance and dressing for self.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.5
• /
• pp.29-37
• /
• 1998

In recent years, grinding techniques for precision machining of stainless steel used in shaft, screw parts and clear value have been improved by using the superabrasive wheel and precision grinding machine. The completion of optimum dressing of superabrasive wheel makes possible the effective precision grinding of stainless steel. However, the present dressing system cannot have control of optimum dressing of the superabrasive wheel. In this study, a new system and the grinding mechanism of optimum in-process dressing of superabrasive wheel. Therefore, the optimum in-process electrolytic dressing is a good method to obtain the efficiency and mirror-like grinding of stainless steel (STS304)