• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.715-720
• /
• 2003

The chief factors for the penetration and diffusion of chloride ions in concrete are water-cement ratio(W/C), aging, curing conditions, chloride ions concentration of given environment., wet and dry conditions and etc. In this study, of these factors effect of curing conditions such as standard and outdoor curing on the characteristics of chloride ions diffusion in concrete were researched when environmental factors for the penetration and diffusion of chloride ions were constant. For this purpose, the voltages passing through the diffusion cell were measured by using accelerated test method using potential difference, and then diffusion coefficients of chloride ions by using Andrade's method were estimated for 44%, 49.5% and 60% of w/c, respectively. As a result., according to curing conditions correlation among diffusion coefficients of chloride ions, W/C and aging were concluded through multiple regression model.

• 한국농공학회논문집
• /
• 제53권1호
• /
• pp.9-15
• /
• 2011

Highly pathogenic avian influenza could not be identified visually. It takes time to identify the symptoms by its incubation period. Without taking a quick step, the diffusion area of HPAI has dramatically increased, the extent of damage becomes bigger. In network research, the algorithm of finding the central node on the network applied to various diffusion of epidemic problems, was used in control system of tracing the diffusion path, blocking central nodes. This study tried to make the diffusion of HPAI network model for the crowded farms area, and reduce the diffusion rate to control the high-risk farms.

• Korean Journal of Mathematics
• /
• 제22권1호
• /
• pp.29-36
• /
• 2014

The limiting diffusion of special diploid model can be defined as a discrete generator for the rescaled Markov chain. Choi([2]) defined the operator of projection $S_t$ on limiting diffusion and new measure $dQ=S_tdP$. and showed the martingale property on this operator and measure. Let $P_{\rho}$ be the unique solution of the martingale problem for $\mathcal{L}_0$ starting at ${\rho}$ and ${\pi}_1,{\pi}_2,{\cdots},{\pi}_n$ the projection of $E^n$ on $x_1,x_2,{\cdots},x_n$. In this note we define $$dQ_{\rho}=S_tdP_{\rho}$$ and show that $Q_{\rho}$ solves the martingale problem for $\mathcal{L}_{\pi}$ starting at ${\rho}$.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2001년도 추계학술대회 논문집
• /
• pp.342-345
• /
• 2001

Telecommunication services are distinctive in that their adoptions are influenced by network effect resulting in 'the late take-off Phenomenon' and the 'critical mass' problem. In this paper we examined, so called, 'the late take-off phenomenon' in the diffusion process of telecommunication services. We compared the parameters of the diffusion process of consumer durables with those of fax services in the US and Korea. By analyzing the parameters of a new diffusion model based on the threshold model proposed by Markus, We found that 'the late take-off phenomenon' resulted from the low heterogeneity of the threshold distribution for the potential adopters.

• Transactions on Electrical and Electronic Materials
• /
• 제5권5호
• /
• pp.180-184
• /
• 2004

This paper proposes a novel methodology of systematic global calibration and validates its accuracy and efficiency with application to memory and logic devices. With 175 SIMS profiles which cover the range of conditions of implant and diffusion processes in the fabrication lines, the dominant diffusion phenomenon in each process temperature region has been determined. Using the dual-pearson implant model and fully-coupled diffusion model, the calibration was performed systematically. We applied the globally calibrated process simulator parameters to memory and logic devices to predict the optimum process conditions for target device characteristics.

• Archives of Pharmacal Research
• /
• 제16권3호
• /
• pp.191-195
• /
• 1993

We investigated the effects of n-alkanols on the range and rate of the lateral diffusion of 1, 3-di(1-pyrenyl)propane in the model membranes of total phospholipid fraction extracted from synaptosomal plasma membrane vesicles. n-Akanols increased the range and rate of the lateral diffusion of 1, 3-di(1-pyrenyl)propane in the bulk model membrane structures (inner + outer monolayers) and the potencies of n-alknols up to 1-nonanol increased by 1 order of magnitude as the carbon chain length increases by two carbon atoms. The cut-off phenomenon was reached at 1-decanol, where further icnrease in hydrocarbon length resulted in a decrease in the lateral diffusion. However, significant changes in the 1'/1 value were not observed by methanol (from 100 to 2500 mM), ethanol (from 25 to 800 mM), and 1-propanol (from 10 to 250 mM) over entire concentration.

• 통합자연과학논문집
• /
• 제4권2호
• /
• pp.130-136
• /
• 2011

This study investigated the adsorption characteristics of nickel, zinc and cadmium ions from the aqueous solution onto the alginate bead. Adsorption equilibrium capacities of the heavy metal ions increased with increasing initial pH of the solution. The adsorption equilibrium isotherm of the heavy metal ions was well represented by Langmuir equation. The magnitude of adsorption capacity of the heavy metal ions onto alginate bead was the order of cadmium > zinc > nickel. Kinetic parameters were measured in a batch adsorber to analyze the adsorption rates of the heavy metal ions. The internal diffusion coefficient of the heavy metal ions in the intraparticle were determined by comparing the experimental concentration curves with those predicted from the surface diffusion model (SDM) and pore diffusion model (PDM). The internal diffusion of the heavy metal ions in the intraparticles was explained by PDM.

• 전기학회논문지
• /
• 제58권2호
• /
• pp.239-241
• /
• 2009

In this paper, an estimation methodology for stand-by energy savings of electric appliances is proposed and some case studies are carried out for televisions. The methodology is based on learning curves and diffusion models, which are able to explain the market characteristics such as market prices and the diffusion speed. Some models were developed to estimate power and energy savings for high-efficient appliances and these model have been used broadly. These models are also applied to this study and modified to estimate stand-by energy savings.

• Computers and Concrete
• /
• 제13권2호
• /
• pp.149-171
• /
• 2014

This study presents the mathematical model for predicting chloride penetration into saturated concrete under non-isothermal condition. The model considers not only diffusion mechanism but also migration process of chloride ions and other chemical species in concrete pore solution such as sodium, potassium, and hydroxyl ions. The coupled multi-ionic transport in concrete is described by the Nernst-Planck equation associated with electro-neutrality condition. The coupling parameter taken into account the effect of temperature on ion diffusion obtained from available test data is proposed and explicitly incorporated in the governing equations. The coupled transport equations are solved using the finite element method. The numerical results are validated with available experimental data and the comparison shows a good agreement.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.320-322
• /
• 2005

Nowadays the concern about development and diffusion strategics of new & renewable energy and its technologies is getting higher globally as Kyoto Protocol has taken effect this year and oil has been rising in price tremendously. Developed countries have already commenced the study and research for this problem and are looking for various solutions. In this paper, environment of new & renewable energy in Korea is analyzed and estimated using diffusion model as a pre-study for proposing appropriate strategies and feasible methods.