• Journal of International Society for Simulation Surgery
• /
• v.3 no.1
• /
• pp.33-35
• /
• 2016

Fibrous dysplasia(FD) is a disorder in which normal bone is replaced with pathologic tissue. When occurring in craniofacial regions, the zygomaticomaxillary complex is most commonly affected and this pathologic lesion results in facial asymmetry. and By using computer-assisted virtual simulation, precise maxillofacial contouring was achieved for harmonious facial morphology and the surgical procedure was simplified and the surgery brought satisfactory results in terms of both esthetics and functionality.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.6
• /
• pp.845-851
• /
• 1986

This Paper presents micro-computer simulation programs for a pneumatic control system. The simulation programs have been written in BASIC language which is suitable for 6502CPU with 48KB memory and consist of 11 programs which describe the time response and frequency response of the pneumatic actuation system. This simulation package is stored in 51/4 inch floppy diskette. The user requires no simulation expertise on the part of designer. As the result of using this simulation programs for the pneumatic control system with stabilizing tank, it has shown that the response time of the system using air as working medium takes more time to be settled but relatively stable rather than the system using helium.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.126-129
• /
• 2008

This paper concerns the progressive die design for an automotive bracket part aided by the computer simulation in order to eliminate the inferiority such as the crack. The computer simulation of the progressive forming process is utilized in order to investigate cause of the cracks. This paper proposes a new guideline for the die design which modifies intermediate shapes and adds intermediate forming stages in progressive forming process. The effectiveness of the proposed design is verified by the computer simulation. The simulation result shows that the modified die design for the progressive forming process can eliminate the crack and improve quality of the automotive bracket part.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.7
• /
• pp.885-895
• /
• 2004

Generally, automatic design is carried out with computer simulation and the simulation models are established by investigating the correlations between the simulation and real experiments. Therefore, the experiment results are utilized as complimentary data although they are considered to be precise. Orthogonal arrays have been adopted for discrete design. A method is proposed to directly exploit the experiment results in the design process with orthogonal arrays. Experiments are allocated to some rows of an orthogonal array and computer simulations are allocated to the others. A rule for the allocation is found to keep the orthogonality. Error analysis of the design results is performed. Mathematical examples are made to verify the validity of the proposed method. Error models are defined with the examples and the design solutions from the examples are discussed.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.4
• /
• pp.559-567
• /
• 1987

In this paper, the real time simulation of continuous dynamic system was performed by general integration algorithms using multiprocessor. For the stable simulation, the relation between stability of integration method and integration step-size was investigated from the stability graph. As a typical illustration, the real-time digital simulation and the real-time hard-ware-in-the-loop simulation of flight control system were performed and reviewed. Moreover through the real-time simulation, the design verification and performace test of flight control system could be evaluated. The computer used for simulation is AD10, which is a very high-speed special-purpose computer designed specifically for a time-critical simulation of large and complex models of dynamic systems. The simulation validity is demonstrated by comparing hardware simulation results with software simulation results.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.6
• /
• pp.533-542
• /
• 2003

This study aims to propose a simplified mathematical model for calculating vertical air temperature distribution in a four-sided atrium. In the first stage of the mathematical modeling, the computer model combined zonal model and solar radiation model using Monte Carlo method and Ray tracing technique went through a computer simulation with architectural variables applied to a four-sided atrium in summer. In the next stage, Curve Expert, a computer program that gets the most suitable solution ac-cording to the least squares method, is used to analyze the results of the computer simulation and to derive the mathematical model. The accuracy of the mathematical model was evaluated through a comparison of calculation results from a mathematical model and computer simulation. In this validation step using the least square method, the R2 value of the Zones 1, 2 and 3 showed higher than 0.945. Zone 4 has an R2 value of 0.911, lower than the previous three zones. However the relative error was below 0.5%, which is considered very small.

• Cartoon and Animation Studies
• /
• s.17
• /
• pp.188-204
• /
• 2009

This study purpose development cg technique our nation because present Technique limit of Computer graphic R&D that the best competition of 3D Computer graphic part and present a answer of how to overcome Technique limit of Computer graphic R&D with success example of Computer graphic R&D an advanced country. if we make full of mutuality supplementation of C.T and I.T then hold a dominant position and the over the limit solution We researches on multi or group simulation of cyber character and water, fire, wind, fog Simulation System of Computer graphic and purpose development of direction Computer graphic R&D to people in Computer graphic the result of this study and introduction of project of a research institution and inflection method this time is a point of R&D time of determined and resolution instead creative part.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.2
• /
• pp.231-240
• /
• 2007

This paper presents an advanced modeling and simulation technique applied to DC/DC power electronic converters fed through renewable energy power sources. The distributed generation (DG) system at the Illinois Institute of Technology, which employs a phase-l system consisting of a photovoltaic-based power system and a phase-2 system consisting of a fuel cell based primary power source, is studied. The modeling and simulation of the DG system is done using the generalized state space averaging (GSSA) method. Furthermore, the paper compares the results achieved upon simulation of the specific GSSA models with those of popular computer aided design software simulations performed on the same system. Finally, the GSSA and CAD software simulation results are accompanied with test results achieved via experimentation on both, the PV-based phase-l system and the fuel cell based phase-2 power system.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.7
• /
• pp.221-229
• /
• 2008

The development of computer and multimedia brought out new technology, that is, virtual reality. Computer simulation adaptation among the technologies of the virtual reality is spreaded into air service, motor vehicle, medical science, sports, education, even fashion industry. This study look into 2-dimensional hair-style computer simulation system which is started to common use nowadays and the 3-dimensional system which is under the development. And this study proposed several problems such as heavy 3D system booth and the low price but low qualified camera in order to commercialize the 3D system. This study also suggest several alternative, for instance, the change from object photography method to panoramic photography method, the substitute by middle or high end and high qualified camera.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1772-1777
• /
• 2000

The Combat Computer Consoles installed in surface ships should endure harsh environment such as vibration from engine or propeller and shock from underwater explosion. Generally, commercial isolation mounts are selected and used for anti-vibration and anti-shock design. In this research, the environment of the Combat Computer Console was analyzed first. Selected proper mount was modeled and computer simulation was performed to emulate the environment test. The real environment test was conducted with a manufactured Combat Computer Console. The test results were same as the simulation and satisfied the performance requirements. The computer simulation proved to be a useful design tool to predict the performance before the final environment test.