• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.8
• /
• pp.1094-1099
• /
• 2012

This study investigated the effect of a long-term high-fat diet on energy metabolic substrate utilization in resting rats in order to revalue source fat energy efficiency during a high-fat diet and its effect on energy expenditure and body fat accumulation. Sprague-Dawley male rats at 4 weeks of age were bought from Orient Bio Con. The rats were divided into a control (CON) group and a high-fat diet (HF) group. Rats ate a high-fat diet (w/w 40%, kcal/kcal 64.9%) ad libitum for 5 weeks. Food intake and body weight were measured every day at 09:00 throughout the experimental period. Energy expenditure was measured using an animal energy metabolism chamber after 4 weeks. The final body weight did not change between the CON and HF groups, but caloric intake was significantly higher in the HF group than in the CON group (p<0.05). There was no difference between the groups in oxygen uptake, however carbon dioxide production was significantly higher in the HF group. Also, the respiratory exchange ratio was higher in the HF group. Carbohydrate oxidation was lower in the HF group than in the CON group, but fat oxidation in the HF group was greater. These results mean that energy substrate oxidation at rest is affected by diet composition, especially dietary fat content. Abdominal fat fad weights were significantly higher by 33% in the HF group than in the CON group even though the calorie intake in the HF group was higher by 6%. These results suggested that the dietary fat calorie value might have a higher Atwater value of 9 kcal/g, which mean that dietary fat calorie values could be reconsidered in body weight control scenarios such as which the obese or weight class athletes.

• Electrical & Electronic Materials
• /
• v.12 no.7
• /
• pp.7-11
• /
• 1999

Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.279-287
• /
• 2018

Sealants are an important element of modern architecture and serve as a building protection against weathering by providing barriers against ingress of moisture, air, and other materials. Exposure to a variety of environments often reduces lifespan due to changes in physical, chemical and mechanical characteristics, and UV, humidity, and temperature expansion are important issues that are directly related to durability. In this study, a combined deterioration test chamber was developed to simulate the environment of the open air as an instrument for verifying the durability of structural sealing materials indoors. In order to replicate special weather conditions, such as yellow dust, acid rain, and contamination by microorganisms, it was deemed impossible to replicate the outdoor environment by 100 %, and the results of the results of the results of the external exposure test of the structural sealant and the combined deterioration testing device. As a result of the displacement test of the outdoor exposure test, it was determined that the sealant was breaking apart and that it would be smooth, and the displacement would be up to three times greater than the initial material value of 1 year. The displacement test results of the combined deterioration test device show the tendency to deteriorate, decreasing the elasticity and tensile characteristics. In the case of denatured silicon, the current 400 cycles have been completed to confirm 12 months of degradation of the external exposure. The deformation of the test specimen cannot be verified with the naked eye, so it is considered that the conditions of the specimen are more stable than the silicon sealant. As a result of the outdoor exposure test, if the combined deterioration test device is structured and proposed in the relevant guidance or specification, the anticipated lifespan of 12 months in the actual use environment can be verified indoors and below 3 months later, economically.

• Restorative Dentistry and Endodontics
• /
• v.30 no.5
• /
• pp.409-422
• /
• 2005

The aim of this study was to identify the bacteria isolated from acute endodontic lesions by cell culture and 16S rDNA sequencing. The necrotic pulpal tissue was collected from 17 infected root canals, which were diagnosed as being either an acute pulpitis or acute periapical abscess. Samples were collected aseptically from the infected pulpal tissue of the infected root canals using a barbed broach and a paper point. The cut barbed broaches and paper points were transferred to an eppendorf tube containing 500 ul of 1 XPBS. The sample solution was briefly mixed and plated onto a BHI-agar plate containing $5\%$ sheep blood. The agar plates were incubated in a $37^{\circ}C$ anaerobic chamber for 7 days. The bacteria growing on the agar plate were identified by 16S rRNA coding gene (rDNA) cloning and sequencing at the species level. Among the 71 colonies grown on the agar plates, 56 strains survived and were identified. In dental caries involving the root canals, Streptococcus spp. were mainly isolated. Actinomyces, Clostridia, Bacteroides and Fusobacteria were isolated in the periapical lesion without dental caries. Interestingly, two new Actinomyces spp. (ChDC B639 and ChDC B631) were isolated in this study. These results showed that there was diversity among the species in endodontic lesions, This suggests that an endodontic infection is a mixed infection with a polymicrobial etiology. These results may offer the bacterial strains for pathogenesis studies related to an endodontic infection.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.6 s.165
• /
• pp.955-965
• /
• 2007

Safety helmets are used widely in various industries by workers since they are legally required to wear them. However, thermal discomfort is one of the major complaints from helmet users. To relieve this problem, frozen gelled packs can be considered for use inside the helmets. In this paper, tests were performed on humans to evaluate the physiological strains of wearing safety helmets and to investigate the effects of using frozen gelled packs inside the helmets. Experiments were conducted in a climatic chamber of WBGT $33{\pm}1^{\circ}C$ under four differed experimental conditions: 1) not wearing a safety helmet(NH); 2) wearing a safety helmet with frozen gelled pack A(HA); 3) wearing a safety helmet with frozen gelled pack B(HB); and 4) wearing only a safety helmet(OH). The results were as follows. First, when comparing NH with OH, physiological responses such as $\bar{T}_{sk},\;T_r$, HR and sweat rate were significantly higher in OH and subjective sensations were reported as less hot and more comfortable than NH(p<.05). Second, in regard to the frozen gelled packs inserted inside the safety helmets, some physiological responses in HA were different from those in HB, according to the two different types of packs. HA was hotter, more uncomfortable and less exhausted than HB. However, result from both HA and HB were lower than those from OH in terms of temperature and humidity inside safety helmet, sweat rate, $T_r$ increase, heat storage(p<.05). When wearing safety helmets with frozen gelled packs, it was shown that heat strain can be alleviated. These results are expected to help millions of workers who complain that wearing safety helmets is uncomfortable and messy.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.2
• /
• pp.270-285
• /
• 2020

This study examines the state of archeological research on Silla and Unified Silla conducted in North Korea and identifies its characteristics. In South Korea, most research has focused on prehistoric times in North Korea, and little research has been done on Silla and Unified Silla. Noting this, we attempted to examine the history of archaeological research in North Korea to provide foundations upon which to go forward. The research was examined in terms of general archaeological themes including tombs, fortresses, the capital city, earthenware, roof tiles, ornaments, weapons, and horse harnesses, and we identified four characteristics from the examination. First, Juche ideology had a great influence on interpretation of the unification of the three kingdoms. The Juche ideology was first proposed in 1955, and at the time, it was not fully established as an ideology but rather seen as constituting opposition to toadyism. Accordingly, the unification of the three kingdoms led by Silla was seen as amounting to collusion with foreign forces and was not acknowledged. A piece of evidence shows that this change took place around 1962. Second, an inclination to testify to the 'uniqueness' of the cultures of the three kingdoms is observed. The argument is that culture in the Korean peninsula has unique characteristics that set it apart from Chinese culture, and that the cultures of the three kingdoms share much in common. This inclination was not mentioned in research until the 1950s, and it can be seen as an effort to comply with Juche ideology and prove the principle of unity as stated in the national leader's instructions in the 1960s. Third, the influence of Goguryeo on the formation of Silla culture is emphasized. Related research explains that Baekje, Silla, and Gaya adopted the 'superior' culture of Goguryeo, and could establish 'uniqueness' of culture accordingly. It is claimed that an advanced Goguryeo culture was disseminated throughout Balhae and Unified Silla, and then to Goryeo, resulting in a true unification of the ethnic culture. Fourth, researchers in North Korea presume the Silla tombs and other relics to be far older than South Korean researchers' estimate. From a standpoint of highlighting the long history of Korea, they estimate the Silla Dynasty was founded in the early or mid-first century. Accordingly, archeological evidence that demonstrates the establishment of the state is dated as far back. Such an estimate is also indispensable in justifying the explanation that the chamber tombs of Goguryeo had a direct influence on Silla. These research characteristics which arose during the 1960s continue to be basic guidelines for North Korean researchers.

• Journal of Korean Society of Forest Science
• /
• v.108 no.1
• /
• pp.40-49
• /
• 2019

Coarse woody debris (CWD), which is a component of the forest ecosystem, plays a major role in forest energy flow and nutrient cycling. In particular, CWD isolates carbon for a long time and is important in terms of slowing the rate of carbon released from the forest to the atmosphere. Therefore, this study measured the physiochemical characteristics and respiration rate ($R_{CWD}$) of CWD for Larix kaempferi and Pinus rigida in temperate forests in central Korea. In summer 2018, CWD samples from decay class (DC) I to IV were collected in the 14 forest stands. $R_{CWD}$ and physiochemical characteristics were measured using a closed chamber with a portable carbon dioxide sensor in the laboratory. In both species, as CWD decomposition progressed, the density ($D_{CWD}$) of the CWD decreased while the water content ($WC_{CWD}$) increased. Furthermore, the carbon concentrations did not significantly differ by DC, whereas the nitrogen concentration significantly increased and the C/N ratio decreased. The respiration rate of L. kaempferi CWD increased significantly up to DC IV, but for P. rigida it increased to DC II and then unchanged for DC II-IV. Accordingly, except for carbon concentration, all the measured characteristics showed a significant correlation with $R_{CWD}$. Multiple linear regression showed that $WC_{CWD}$ was the most influential factor on $R_{CWD}$. $WC_{CWD}$ affects $R_{CWD}$ by increasing microbial activity and is closely related to complex environmental factors such as temperature and light conditions. Therefore, it is necessary to study their correlation and estimate the time-series pattern of CWD moisture.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.6
• /
• pp.451-468
• /
• 2021

Predicting hazardous ground conditions ahead of a TBM (Tunnel Boring Machine) tunnel face is essential for efficient and stable TBM advance. Although there have been several studies on the electrical resistivity survey method for TBM tunnelling, sufficient experimental data considering TBM advance were not established yet. Therefore, in this study, the laboratory-scale model experiments for simulating TBM excavation were carried out to analyze the applicability of an electrical resistivity survey for predicting hazardous ground conditions ahead of a TBM tunnel face. The trend of electrical resistivity during TBM advance was experimentally evaluated under various hazardous ground conditions (fault zone, seawater intruded zone, soil to rock transition zone, and rock to soil transition zone) ahead of a tunnel face. In the course of the experiments, a scale-down rock ground was provided using granite blocks to simulate the rock TBM tunnelling. Based on the experimental data, the electrical resistivity tends to decrease as the tunnel approaches the fault zone. While the seawater intruded zone follows a similar trend with the fault zone, the resistivity value of the seawater intrude zone decreased significantly compared to that of the fault zone. In case of the soil-to-rock transition zone, the electrical resistivity increases as the TBM approaches the rock with relatively high electrical resistivity. Conversely, in case of the rock-to-soil transition zone, the opposite trend was observed. That is, electrical resistivity decreases as the tunnel face approaches the rock with relatively low electrical resistivity. The experiment results represent that hazardous ground conditions (fault zone, seawater intruded zone, soil-to-rock transition zone, rock-to-soil transition zone) can be efficiently predicted by utilizing an electrical resistivity survey during TBM tunnelling.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.118-135
• /
• 2022

The primary purpose of this study is to estimate the structure of Byeongpungsadaseok (屛風莎臺石) and Nanganseok (欄干石) in Geonwonneung (建元陵) and Heonneung (獻陵), which were built in the early of 15th century, based on the Annals of King Sejong. In addition, the ultimate purpose of this study is to reveal structural changes and their significance by comparing the differences with the contents of the dismantlement survey. Geonwonneung, Jereung(齊陵), and Heonneung were repaired at the same time in 1442, and the structural changes were the similar. The purpose of the repair in 1442 was to prevent water from flowing into the underground palace with smooth drainage. As a result of estimating the structure of Geonwonneung and Heonneung according to the records of the Annals of King Sejong, it was created in a very similar form to the Hyeonneung and Jeongneung of Goryeo. And it was clearly recognized that the Royal Tomb of Goryeo was followed. However, as the structure was improved in 1442, the unique characteristics of the Royal Tomb of the Joseon Dynasty were formed. First is the appearance of the Bokbuhyeong lime (覆釜形石灰, which is a convex roof on the Byeongpungsadaseok that serves to prevent rainwater from penetrating into the burial mound. It also plays a role in connecting and fixing the Manseok (滿石) and the Inseok (引石), which are the upper structures of the Sadaseok (莎臺石). Second, the Bakseok (薄石) between the nanganseok and the sadaseok has been transformed into the Sangseok (裳石) with a slope. This plays a role in protecting the inner stone chamber by expanding the length of the bakseok, which forms an overall slope, like the eaves of the roof. After both of these features were first attempted in 1442, they were applied to all Royal Tombs of the Joseon Dynasty and became unique features of these Royal Tombs.

• The Journal of Korean Society for Radiation Therapy
• /
• v.35
• /
• pp.7-13
• /
• 2023

Purpose: In this study, we evaluated the effect of using a customized bolus on dose delivery in the treatment plan when cervical cancer protruded out of the body along with the uterus and evaluated reproducibility in patient set-up. Materials & Methods: The treatment plan used the Eclipse Treatment Planning System (Version 15.5.0, Varian, USA) and the treatment machine was VitalBeam (Varian Medical Systems, USA). The radiotherapy technique used 6 MV energy in the AP/PA direction with 3D-CRT. The prescribed dose is 1.8 Gy/fx and the total dose is 50.4 Gy/28 fx. Semiflex TM31010 (PTW, Germany) was used as the ion chamber, and the dose distribution was analyzed and evaluated by comparing the planned and measured dose according to each position movement and the tumor center dose. The first measurement was performed at the center by applying a customized bolus to the phantom, and the measurement was performed while moving in the range of -2 cm to +2 cm in the X, Y, and Z directions from the center assuming a positional error. It was measured at intervals of 0.5 cm, the Y-axis direction was measured up to ±3 cm, and the situation in which Bolus was set-up incorrectly was also measured. The measured doses were compared based on doses corrected to CT Hounsfield Unit (HU) 240 of silicon instead of the phantom's air cavity. Result: The treatment dose distribution was uniform when the customized bolus was used, and there was no significant difference between the prescribed dose and the actual measured value even when positional errors occurred. It was confirmed that the existing sheet-type bolus is difficult to compensate for irregularly shaped tumors protruding outside the body, but customized Bolus is found to be useful in delivering treatment doses uniformly.