Purpose: Cricopharyngeal incoordination is a rare cause of swallowing difficulties in newborns and infants; it is characterized by delayed pharyngeal contractions related to cricopharyngeal relaxation. Dysphagia and repeated aspiration are common findings despite normal sucking. We conducted this study to assess the clinical features of cricopharyngeal incoordination in newborns and infants. Methods: An analysis of the clinical data from 17 patients with cricopharyngeal incoordination who were admitted to the Department of Pediatrics, Pusan National University Hospital, between 2000 and 2006 was conducted retrospectively. The diagnosis of cricopharyngeal incoordination was established by the clinical characteristics and the videofluoroscopic swallowing studies. Results: The male to female ratio was 1:1.1 (males 8, females 9) the age range 1 to 60 days. The body weight of 11 patients (64.7%) was less than the $10^{th}$ percentile at diagnosis. Six patients (35.3%) were born prematurely. The associated anomalies or diseases were chromosomal anomaly (2 cases), congenital heart disease (3 cases), and laryngomalacia, hypoxic brain damage or neonatal seizures (1 case each). The chief complaints of patients were recurrent aspiration pneumonia (10 cases), feeding difficulty (9 cases), dyspnea (4 cases), and chocking (4 cases). The severity of aspiration on the videoesophagogram or esophagogram was mild in 12 cases. The correlation between the severity of aspiration and the duration of tube feeding after the diagnosis was significant (p<0.05). Conclusion: Cricopharyngeal incoordination should be considered in the differential diagnosis of newborns and infants, without known risk factors associated with swallowing dysfunction, when they present with unexplained respiratory problems. Although the prognosis of cricopharyngeal incoordination is good, early diagnosis and tube feeding are recommended to prevent the complications associated with this disorder.
Purpose : The purpose of this study is to investigate the clinical manifestations and antibiotic resistance of salmonellosis in children. Methods : We reviewed medical records and investigated the clinical characteristics of culture-proven childhood salmonellosis from January 2000 through December 2011 at the CHA Bundang Medical center. Results : We assessed 53 patients. The median age was 3-years-old (minimum 12 days, maximum 18-years-old) and the number of male patients was 33 (62.3%). It occurred most frequently in the summer (39%) and in 2001 (11 cases) however there was no case in 2009 and 2010. Salmonella typhi was isolated in 3 cases with septicemia. Antibiotic resistance to ampicillin was most frequently presented (30.2%) and 63.6% in serogroup B. No antibiotics resistance strains were cultured in patients with positive Salmonella typhi. Admitted patients from 2000 to 2011 were divided into 2 groups; group 1 from 2000 to 2005 and group 2 from 2006 to 2011. 40 cases belonged to group 1 and 13 cases were in the group 2. Group 2 showed more resistance to ampicillin than group 1 but without any statistical significance(25% vs. 38.5%, P=0.349). In group 1, the most common serotype was group D and in group 2, the most common serotype were group C and D. Conclusion : Salmonellosis in children was frequently occurred from 2000 to 2003 but decreased after 2004. There was no difference in clinical manifestations, serotypes and antibiotic resistances between the years.
Complex product systems (CoPs) is a engineering-intensive products with high-ended design technology, which are closely linked with national economic growth and development of social infrastructures. Accordingly, in order to understand the technological evolution of CoPs, it is necessary to identify the macro-environmental drivers surrounding the CoPs and their impact on the technological evolution of the CoPS. Therefore, we investigate the effect of policy, economic and social drivers on the technological evolution of CoPS by implementing the longitudinal case study on nuclear power plant during the periods between 1950 and 2010s. Based on the analysis of various sources of secondary data and primary data through interviews, we found that the technological evolution of nuclear power plant is progressed as "Phase 1: Application research for peaceful utilization of nuclear energy" between 1950s and 1960s, "Phase 2: The first renaissance of nuclear energy" during 1970s, "Phase 3: Enhancement of safety and the catch-up of latecomers in nuclear energy" between 1990s and 2000s, and "Phase 4: Top prioritization of safety and the development of next generation reactors for the second renaissance of nuclear energy" since 2010s. We also found that various kinds of policy, economic and social drivers, such as energy policy, investment in technology development, economic growth and energy demand, social acceptability and environmental concern, have affected the technology evolution of nuclear power plant at each phase. We emphasize the role of macroenvironmental drivers in the technological evolution of CoPS. We also suggest that countries that endeavor to develop CoPs need to utilize those drivers for enhancing competitiveness and sustaining leadership.
Effects of the indigenous Vesicular-arbuscular mycurrhizal fungi(VAMF) on early growth response of greenhouse grown crops were experimented. This study was done to evaluate the benefit of indigenous VAMF inoculation on the early growth and the subsequent growth after transplanting of some crops such as cucumber, tomato, hot pepper, eggplant, and melon. Leaf area, shoot dry weight, and plant length of mycorrhizal greenhouse crops showed the tendency of significant or no significant increase over control plants receiving no inoculation. The levels of VA mycorrhizal colonization were increased with plant growth, and infection rates of horticultural crop except hot pepper around one week after transplanting were decreased, while that of 8 weeks after emergence of mycorrhizal seedlings were increased again and infected by around 50% at harvesting time. In spore densities in the rhizosphere soil of craps experimented, the number of spore ranged from $72.7{\pm}26.3$ to $100{\pm}10.3g^1$ on dried soil basis and high density showed in both cucumber and tomato. Total nitrogen contents in shoots were lower in the mycorrhizal plants than non-mycorrhizal one, whereas P uptake in mycorrhizal hot pepper and tomato were highly ramarkable. The K contents in the shoots of mycorrhizal cucumber and eggplent were highly enhanced. Inoculation of the indigenous VAMF enhanced shoot Ca and Mg in both tomoto and melon. The contents of Fe, Zn, Mn and Cu in shoots of mycorrhizal crops were higher than non-mycorrhizal plants and vice versa in case of eggplent. Inoculation of the indigenous VAMF to horticultural crops were effective for alleviation of transplanting shock, and pretransplanting infection improved subsequent growth by reducing the time required for establishment of a functional mycorrhizal symbiosis following transplanting.
The purpose of this study was to seek the optimum condition for effective separation of the chemical constituents of wood biomass by means of hydrolysis of acetone solution in presence of acid salt as a catalyst. Out of diverse acid salts the catalytic effect of aluminum sulfate ($Al_2(SO_4)_3$) was the most excellent during the hydrolysis of wood biomass in the acetone solution and the optimum concentration was 0.01 M (6.3 wt%). In the condition of mixture ratio of acetone and water to 9 : 1 as well as optimum concentration of aluminum sulfate two wood biomass species, oak wood (Quercus mongolica Fischer) and Pine wood (Pinus densiflora Sieb. et Zucc.), was hydrolyzed for 45 minutes at $200^{\circ}C$ and the degree of hydrolysis was determined to 92.7% and 92.4%, respectively. Extending the reaction time to 60 minutes in the mixture ratio of acetone and water to 8 : 2 the degree of hydrolysis of oak wood was also ca. 92.7%. In the case of Pinus, however, the similar hydrolysis ratio was obtained at $210^{\circ}C$. As the temperature and hydrolysis time increased, the quantitative amount of lignin recovered from the hydrolysate clearly increased, whereas the total amount of carbohydrates in the hydrolysate decreased rapidly. Considering the recoverable amount of lignin and carbohydrate in the hydrolysate, the best condition for the hydrolysis of wood biomasses were confirmed to the mixture ratio of acetone and water to 8 : 2, the concentration of aluminum sulfate of 6.3 wt%, hydrolysis temperature of $190^{\circ}C$ for 60 minutes. In this condition the total amounts of carbohydrate in the hydrolysates of oak wood and pine wood were estimated to 47.6% and 51.4%, respectively. The amount of lignin recovered from the hydrolysates were ca. 18.2% for oak wood and 13.7% for pine wood.
This study performed microbiological hazards analysis in raw food materials, cooking processes, kitchen staff, utensils, and the environment in order to obtain contamination levels of S. aureus in school foodservice operations. S. aureus was not detected in cooked foods offered by the foodservice operations; however, it was found in raw food materials prior to cooking. In the case of vegetables, S. aureus was detected in washed mung bean sprouts, parboiled mung bean sprouts, and bellflower roots both before and after disinfection, at levels of 2.2, 1.0, 1.0, and 1.0 log CFU/g, respectively. For processed foods, S. aureus was detected in one sample of packaged bean curd as well as in mung bean jelly cake at the level of 1.5 log CFU/g. For meat products, S. aureus was detected in beef brisket and chicken at levels of 2.3 and 1.3 log CFU/g, respectively. To determine microbiological hazard data for the hands and gloves of cooking personnel, the staff members were divided into two groups: a group presenting Enterobacteriaceae or coliforms, and another group presenting neither Enterobacteriaceae nor coliforms. The results showed that S. aureus was detected on the hands of staff in each group at levels of 2.0 and 2.1 log CFU/hand, respectively, and at 1.8 and 0.0 log CFU/hand on the gloves of staff in each group, respectively. Among kitchen utensils, as an environmental factor in school foodservice operations, S. aureus was detected on meat knives, mixing bowls, and dish cloths at levels exceeding 1.0 log CFU/hand.
Kim, Jin-Man;Park, Jung-Min;Yoon, Tae-Hyung;Leem, Dong-Gil;Yoon, Chang-Yong;Jeong, Ja-Young;Jeong, In-Seek;Kwak, Byung-Man;Ahn, Jang-Hyuk
Food Science of Animal Resources
/
v.31
no.6
/
pp.944-951
/
2011
An improved cholesterol analysis method was developed for powdered infant formula by gas chromatographic separation after liquid-liquid extraction and partition. In the official Korea Food Standard method for cholesterol analysis, the water phase and solvent phase were not well separated in the case of emulsified foods such as powdered infant formulas and baby foods. For the rapid and simple sample preparation method, an optimized direct saponification condition was established for heating temperature, heating time, and KOH concentration. From the results, the optimum conditions were as follows: heating temperature $90^{\circ}C$, heating time 60 min, and 16 M KOH 10 mL for a 2 g infant formula sample; improved separation condition for gas chromatography was as follows: the initial oven condition was $250^{\circ}C$ for 25 min, the oven temperature was increased to $290^{\circ}C$ by $10^{\circ}C$/min ratio, and finally the oven temperature remained at $290^{\circ}C$for 9 min. The developed method could be implemented for the study of cholesterol, providing the advantages of reduced inspection time and cost in emulsified foods such as infant formula.
The purpose of this article is to empirically testify three hypotheses on the relation between married women's employment and the allocation of unpaid domestic work within households - i.e., adaptive partnership (AP), dual burden (DB) and lagged adaptation (LA) models. The AP hypothesis assumes that, when wives are employed, husbands spend more time doing housework in order to compensate for their wives' increased responsibility. The DB model, by contrast, indicates that, even if married women are employed, their burden on domestic work does not decrease. In this case, therefore, the dual burden of married women can be expected. Between these two opposite views, the third, alternative hypothesis has been suggested recently. The LA model argues that the behaviours of households are adaptive to the changing environments but over a period of many years and even across generations. The article has analysed the total work time as well as unpaid domestic work time to testify these three hypotheses, utilising 1999 Time Use Survey data of the National Statistical Office. The research results can be summarised as follows. First, married working women worked 100 minutes more than their male spouses. Second, the average domestic work time of married men, 23-25 minutes per day, was no more than 5-10% of that of women. Third, the effects of age and women's employment were not statistically significant in multiple regression models, which means that the DB hypothesis explains the situation of married working women in Korea. Based on these findings, the article suggested the expansion of the public social service system to mitigate the dual burden of married working women, the introduction of compensatory credit for caring work, and the directions of further empirical research using the time use survey data.
In this study, pressure drop was measured in the pulse jet bag filter without venturi on which 16 numbers of filter bags (Ø$140{\times}850{\ell}$) are installed according to operation condition(filtration velocity, inlet dust concentration, pulse pressure, and pulse interval) using coke dust from steel mill. The obtained 180 pressure drop test data were used to predict pressure drop with multiple regression model so that pressure drop data can be used for effective operation condition and as basic data for economical design. The prediction results showed that when filtration velocity was increased by 1%, pressure drop was increased by 2.2% which indicated that filtration velocity among operation condition was attributed on the pressure drop the most. Pressure was dropped by 1.53% when pulse pressure was increased by 1% which also confirmed that pulse pressure was the major factor affecting on the pressure drop next to filtration velocity. Meanwhile, pressure drops were found increased by 0.3% and 0.37%, respectively when inlet dust concentration and pulse interval were increased by 1% implying that the effects of inlet dust concentration and pulse interval were less as compared with those changes of filtration velocity and pulse pressure. Therefore, the larger effect on the pressure drop the pulse jet bag filter was found in the order of filtration velocity($V_f$), pulse pressure($P_p$), inlet dust concentration($C_i$), pulse interval($P_i$). Also, the prediction result of filtration velocity, inlet dust concentration, pulse pressure, and pulse interval which showed the largest effect on the pressure drop indicated that stable operation can be executed with filtration velocity less than 1.5 m/min and inlet dust concentration less than $4g/m^3$. However, it was regarded that pulse pressure and pulse interval need to be adjusted when inlet dust concentration is higher than $4g/m^3$. When filtration velocity and pulse pressure were examined, operation was possible regardless of changes in pulse pressure if filtration velocity was at 1.5 m/min. If filtration velocity was increased to 2 m/min. operation would be possible only when pulse pressure was set at higher than $5.8kgf/cm^2$. Also, the prediction result of pressure drop with filtration velocity and pulse interval showed that operation with pulse interval less than 50 sec. should be carried out under filtration velocity at 1.5 m/min. While, pulse interval should be set at lower than 11 sec. if filtration velocity was set at 2 m/min. Under the conditions of filtration velocity lower than 1 m/min and high pulse pressure higher than $7kgf/cm^2$, though pressure drop would be less, in this case, economic feasibility would be low due to increased in installation and operation cost since scale of dust collection equipment becomes larger and life of filtration bag becomes shortened due to high pulse pressure.
Purpose: The purpose of this study was to investigate the effect of heat applied to disintegrate cement on the removal torque value and fracture strength of titanium abutment and abutment screw. Materials and methods: Implants, titanium abutments and abutment screws were prepared for each 20 piece. Implant abutments and screws were classified as the control group in which no heat was applied and the experimental group was heated in a vacuum furnace to $450^{\circ}C$ for 8 minutes and cooled in air. The abutments and screws were connected to the implants with 30 Ncm tightening torque at interval 10 minutes and the removal torque value was measured 15 minutes later. And the fracture strength of abutment screw was measured using universal testing machine. Results: The mean removal torque value was $27.84{\pm}1.07Ncm$ in the control group and $26.55{\pm}1.56Ncm$ in the experimental group and showed statistically significant difference (P < .05). The mean fracture strength was $731.47{\pm}39.46N$ in the control group and $768.58{\pm}46.73N$ in the experimental group and showed statistically no significant difference (P > .05). Conclusion: The heat applied for cement disintegration significantly reduced the removal torque value of the abutment screw and did not significantly affect fracture strength of the abutment screw. Therefore, in the case of applying heat to disintegrate cement it is necessary to separate the abutment screw or pay attention to the reuse of the heated screw. However further studies are needed to evaluate the clinical reuse of the heated screw.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.