• 한국표면공학회지
• /
• 제39권6호
• /
• pp.263-267
• /
• 2006

As technology advances, there is a demand for development of hard solid lubricant coating. (Ti, Cr, Zr)N-$MoS_2$ films were deposited on AISI H13 tool steel substrate by co-deposition of $MoS_2$ with (Ti, Cr, Zr)N using a D.C. magnetron sputtering process. The influence of the $N_2Ar$ gas ratio, the amount of $MoS_2$ in the films and the bias voltage on the mechanical and structural properties of the films were investigated. The highest hardness level was observed at the $N_2/Ar$ gas ratio of 0.3. Hardness of the films did not change much with the increase of the $MoS_2$ content in the films. As the substrate bias potential was increased, hardness level of the film reached maximum at -150 V. Surface morphology of these films indicated that high hardness was attributed to the fine dome structure.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권1호
• /
• pp.1-5
• /
• 2006

The effect of A/B moi ratios and sintering temperatures on dielectric properties and microstructure of $(Ba_{0.93}Ca_{0.07})_m(Ti_{0.82}Zr_{0.18})O_3$ ceramics were investigated. The dielectric constant decreased with increasing the A/B mol ratio. However, the dielectric loss is improved. As the dielectric properties of A/B mol ratio with m = 1.009 at sintered temperature $1260^{\circ}C$, we obtained dielectric constant 12,800, dielectric loss $3.5\%$ and Y5V temperature characteristics. Highly reliable Ni-MLCCs, 1.6mm$(length){\time}0.8mm(width){\time}0.8mm$(height) with capacitance of 1.23 ${\mu}F$ and 야ssipation loss of $5.2\%$ were obtained employing dielectric material composed of $(Ba_{0.93}Ca_{0.07})_{1.009}(Ti_{0.82}Zr_{0.18})O_3$ - $MnO_2\;0.2wt\%-Y_2O_3\;0.18wt\%,\;-\;SO_2\;0.15wt\%-(Ba_{0.4}Ca_{0.6})SiO_3\;1wt\%$.

• 소성∙가공
• /
• 제16권5호통권95호
• /
• pp.386-390
• /
• 2007

In order to, simultaneously, synthesize and control the size of microstructure of amorphous/crystalline composites, a repeated extrusion process was performed using the gas atomized $Cu_{54}Ni_6Zr_{22}Ti_{18}$ metallic glass powders and the crystalline brasses. The size of microstructure in the resultant composites was varied depending on the pass of extrusion as well as on the area reduction ratio. The microstructure could be estimated using an equation of $r_n=r_{n-1}/R^{1/2}$, where R is reduction ratio and $r_n$ is the resultant radius of the extruded bar after n pass. Theory of microstructural refinement as well as the relationship between the resultant microstructures and mechanical properties was discussed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.607-610
• /
• 2004

The Pb $(Zr_{0.52}Ti_{0.48})O_3/(Ba_{0.6}Sr_{0.4}TiO_3$ [PZT(52/48)/BST(60/40)] heterolayered thin films were fabricated on the Pt/Ti/$SiO_2$/Si by RF sputtering method. The structural properties of the PZT(52/48)/BST(60/40) heterolayered thin films were investigated with Ar/$O_2$ ratio condition. All the PZT(52/48)/BST(60/40) heterolayered thin films had shown the PZT(111), (200) and BST(200) Peaks of the tetragonal structure. Increasing the Ar/$O_2$ ratio, the average roughness was increased. The thickness ratio of the to the PZT and BST thin film was 1:2. In the case of the PZT(52/48)/BST(60/40) heterolayered thin films with Ar/$O_2$ ratio of 80/20, the average roughness was 3.4 [nm].

• Transactions on Electrical and Electronic Materials
• /
• 제11권6호
• /
• pp.275-278
• /
• 2010

We have examined the Ferroelectric properties of $PbZr_{0.4}Ti_{0.6}O_3$ (PZT) grains by monitoring the surface potential through the utilization of Kelvin force microscopy. Hysteretic and time dependent behaviors of small and large grains were compared with each other. The smaller grain yields had smaller values of surface potential. However, the normalized voltage versus surface potential behavior indicates that the smaller grains became saturated earlier with respect to the writing voltages than did the larger grains. On the other hand, the surface potential hysteresis loop obtained from the smaller grains showed a similar shape to what might be obtained from a Zr rich PZT film. In contrast the hysteresis loop of the larger grain looks like that obtained from a Ti-rich film. In addition, the time dependent behaviors of the smaller grains also revealed a better response than the response of larger grains. The overall ferroelectric properties of the smaller grains seem better than corresponding properties for larger grains. The Ti/Zr ratio of the PZT film which was examined in this study was 60/40.

• Korean Chemical Engineering Research
• /
• 제45권4호
• /
• pp.378-383
• /
• 2007

Zirconium titanate($Zr_xTi_{1-x}O_2$)와 같은 다성분계 금속산화물의 박막을 형성함에 있어 비교적 저온에서 박막성분 간의 정확한 조성조절이 이루어지며 균일한 박막특성을 같게 하는 새로운 박막제조 공정방법을 제시하였다. 이 공정방법은 우선 다성분계 금속산화박막을 구성하는 단성분계 금속산화막들을 적층식구조로 형성하여 적절한 열처리로 고상확산 반응을 통한 단일상 다성분계 박막을 형성하는 것을 특징으로 한다. 본 연구에서는 단성분계 산화박막층을 형성하는 방법으로 나노두께의 박막을 형성할 수 있는 능력과 두께조절성이 우수한 PRTMOCVD(pulsed rapid thermal metalorganic chemical vapor deposition) 법이 개발 적용하였다. PRTMOCVD 법으로 $ZrO_2$와 $TiO_2$ 단성분 산화막의 두께를 제어하면서 교차로 적층시킨 후 $850^{\circ}C$의 질소분위기에서 30분간 열처리를 통한 박막간의 상호확산을 통해 $Zr_xTi_{1-x}O_2$ 다성분계 산화박막을 형성하였다. 박막내의 Zr과 Ti의 조성은 $ZrO_2$와 $TiO_2$ 단성분 산화막의 두께로 조절하였다. 형성된 $Zr_xTi_{1-x}O_2$ 박막에 대한 상세한 물성을 분석하였다.

• 한국재료학회지
• /
• 제10권5호
• /
• pp.360-363
• /
• 2000

다양한 Zr/Ti 비율을 갖고 있는 강유전체 PZT박막을 졸-겔 법으로 증착하였고 상부 백금전극의 제조방법과 열처리온도의 변화에 따라 강유전체 특성을 측정하여 이력곡선의 변형 원인을 조사하였다. Pt/PZT/Pt 캐패시터는 상부 백금전극을 반응성 이온 식각(RIE) 하는 과정에서 생성된 dc plasma 전압에 의하여 양의 방향으로 분극되었고 도메인 계면에 포획된 전하에 의해 내부전장이 발생되었다. PZT 박막은 sputtering으로 상부전극을 증착하는 과정에서 이력곡선의 중간에 잘룩하게 되는 시효현상이 관찰되었다. 상부전극을 제작한 후 열처리는 포획된 전하흫 제거시켜 양호한 이력곡선 특성을 되찾게 하였다. Zr/Ti 비율이 감소함에 따라 내부전장이 증가하였으며 내부전장이 없어지는 열처리온도가 증가하였다.

• The Journal of Advanced Prosthodontics
• /
• 제7권2호
• /
• pp.166-171
• /
• 2015

PURPOSE. The aim of this study was to evaluate antibacterial activity and osteoblast-like cell viability according to the ratio of titanium nitride and zirconium nitride coating on commercially pure titanium using an arc ion plating system. MATERIALS AND METHODS. Polished titanium surfaces were used as controls. Surface topography was observed by scanning electron microscopy, and surface roughness was measured using a two-dimensional contact stylus profilometer. Antibacterial activity was evaluated against Streptococcus mutans and Porphyromonas gingivalis with the colony-forming unit assay. Cell compatibility, mRNA expression, and morphology related to human osteoblast-like cells (MG-63) on the coated specimens were determined by the XTT assay and reverse transcriptase-polymerase chain reaction. RESULTS. The number of S. mutans colonies on the TiN, ZrN and $(Ti_{1-x}Zr_x)N$ coated surface decreased significantly compared to those on the non-coated titanium surface (P<0.05). CONCLUSION. The number of P. gingivalis colonies on all surfaces showed no significant differences. TiN, ZrN and $(Ti_{1-x}Zr_x)N$ coated titanium showed antibacterial activity against S. mutans related to initial biofilm formation but not P. gingivalis associated with advanced periimplantitis, and did not influence osteoblast-like cell viability.

• 대한치과보철학회지
• /
• 제50권3호
• /
• pp.169-175
• /
• 2012

연구 목적: 온도 변화에 따른 $ZrO_2$와 Ti-6Al-4V의 접합 특성에 대해 알아보기 위하여 새로운 브레이징 합금을 제조하고, 브레이징 온도가 접합 특성에 미치는 영향에 대하여 조사하고자 하였다. 연구 재료 및 방법: 본 연구에서 사용된 시편으로는 실험용 $ZrO_2$ 모재(ZirBlank-PS, Acucera, Inc., Gyeonggi-do, Korea)는 소결 전의 블록형태($65mm{\times}36mm{\times}12mm(t)$)이며, 이를 잘라 사포(#2400)로 표면연마 후 소결하였다. 소결된 $ZrO_2$ 시편의 크기는 $3mm{\times}3mm{\times}3mm(t)$이다. Ti-6Al-4V 모재(Ti 6Al 4V ELI CG Bar, TMS, Washington, USA)는 직경 $10mm{\times}5mm(t)$를 사용하였다. 소결된 $ZrO_2$와 Ti-6Al-4V의 접합을 위하여 브레이징 합금을 제조하였다. 시편을 3군으로 나누어 A군은 $700^{\circ}C$에서, B군은 $750^{\circ}C$에서, C군은 $800^{\circ}C$에서 각각 브레이징 하였다. 브레이징 부의 두께와 결함율의 측정은 각 군당 하나의 시편으로 각 시편 당 5회씩 반복 측정하여 평균값을 취하였다. 결과: 브레이징 합금을 사용하여 진공 브레이징을 수행한 결과 $ZrO_2$ 와 Ti-6Al-4V 는 $700^{\circ}C-800^{\circ}C$에서 양호한 접합을 보였다. 브레이징 후 브레이징 온도 변화에 따른 브레이징 부의 두께 및 결함율의 변화는 SEM을 사용하여 측정하였다. 브레이징 온도가 $700^{\circ}C$에서 $800^{\circ}C$로 증가함에 따라 CuTi 금속간 화합물 층 및 Ti-Sn-Cu-Ag계 화합물 층의 두께는 각각 $4.5{\mu}m$에서 $10.3{\mu}m$로, $3.1{\mu}m$에서 $5.0{\mu}m$로 증가되었다. 또한 브레이징 온도가 $700^{\circ}C$에서 $800^{\circ}C$로 증가함에 따라 브레이징 접합계면의 결함율은 $ZrO_2$ 및 Ti-6Al-4V 계면에서 각각 25%에서 16.3%, 5%에서 1.5%로 감소되었다. 결론: 브레이징 온도가 $700^{\circ}C$에서 $800^{\circ}C$로 증가됨에 따라, 브레이징 접합계면의 결함율은 $ZrO_2$ 및 Ti-6Al-4V 계면에서 모두 감소되었다. 이는 결함부에서 $ZrO_2$와 활성원소인 Ti과의 반응이 충분히 일어나지 않아서 브레이징 합금이 $ZrO_2$에 웨팅되지 않은 것이 원인이라고 사료된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.42-45
• /
• 2001

(Ba$_{0.6-x}$Sr$_{0.4}$Ca$_{x}$)TiO$_3$+yZrO$_2$wt% (x=1.10, 0.15, 0.20, y=0.5~3.0) specimens were fabricated by the mixed and ZrO$_2$ contents were studied. All BSCT specimens contents were studied. All BSCT specimens showed dense and homogeneous structure without the presence of the seconds phase. The Curie temperature and the dielectric constant at room temperature decreased with increasing the Ca/Ba composition ratio and ZrO$_2$ content. The BSCT(50/40/10) specimens showed the excellent tunability property. And the tunability were increased with increasing the contents of ZrO$_2$./TEX>.