• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.2
• /
• pp.123-128
• /
• 2010

ularly, a points of view Health-care system, it can reduce costs and efforts in order to management of patients. However, Health-care system keep a level of service for person and extends of hospital inner parts system. Although the rate of an addict grow by alcoholic but it is difficult to manage and diagnosis because of patient data gathering. Therefore in this thesis, it is proposed to patient data gathering and monitering method in u-zone. It can collect patient data by pulse, temperature and acceleration sensor and it can diagnosis correct based on emotion change data.

• International Journal of Highway Engineering
• /
• v.16 no.3
• /
• pp.109-117
• /
• 2014

PURPOSES : This study analyzes the available working time at work-zone on the Expressway in accordance to the new capacity manual. METHODS : Sensitivity analysis on variables were conducted to calculate the adjusted capacity at work-zone based on previous researches. RESULTS : The main factors which affect available working time at the work-zone were its capacity, number of lanes, terrain and lane width. Other factors have minimal effect on the available working time. Based on the analysis, a calendar of lane closures was suggested. CONCLUSIONS : A series of studies concluded that the capacity at work-zone in the new capacity manual reduced to 76-82% of the existing manual. As such, the available working time decreased. Furthermore, the factors affecting the available working time needs to be considered when making a plan to rehabilitate the distressed pavement.

• Journal of Environmental Impact Assessment
• /
• v.7 no.1
• /
• pp.49-61
• /
• 1998

Zoning areas within national parks in Korea are classified into Natural Preservation Zone(NPZ). Natural Environment Zone(NEZ), Settlement Zone(SZ) and Mass Facility Zone(MFZ) based on the Natural Park Act Large-scale development which might cause permanent destruction of natural resources are being done in NEZ which covers 90% of the total natural park area. Thus it is necessary to examine National Park Act which refers the authorized criteria and development activities of NEZ. However, the current environmental impact statement(EIS) does not cover the full impact of the development inside the national park area. Based on these concepts, the study examines the appropriate resources to distinguish the NPZ and NEZ in Mt. Teogyu National Park, then compare the distribution of resource characteristics between two area by using GIS. Through this study, the conclusions are as follows; (1) In terms of scenic resource analysis, the current NPZ does not meet the criteria on the National Park Act Rather, most of the resources which should be located within the NPZ are located within the NEZ. (2) In terms of elevation analysis, Mt. Teogyu National Park, most of NPZ are located on high altitude which is more than l,200m above the mean sea level. Therefore, it shows the elevation is the only criteria for distinguishing NPZ and NEZ. (3) In terms of Degree of Green Naturality(DGN), the second forest areas, the eighth grade of DGN in Mt. Teogyu National Park are distributed much more in the NEZ than NPZ. (4) After examining five factors - scenic resources, elevation, slope and DGN, vegetation- it was found out that zoning of Mt. Teogyu National Park is not adequatly designated. Zoning of national parks should be accomplished based on the precise inventory of the current resources.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.05a
• /
• pp.449-453
• /
• 2003

In this paper, we evaluate the performance of zone-based registration, distance-based registration and distance-based registration considering call arrival. We propose the mobility model, which can be used to analyze the performance of three registration schemes. Numerical results show that zone-based registration needs less number of registration than distance-based registration. On the other hand, the registration load of the distance-based registration is equally distributed to all cells in a location area. However, the registration load of the distance-based registration considering call arrival is similar to that of zone-based registration and equally distributed to all cells in a location am Therefore, the proposed scheme can be effectively used restricted radio resources.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.2
• /
• pp.1-8
• /
• 2006

In this paper, we propose a distance-based location registration scheme and evaluate it's performance in a mobility model. We compare performance of the distance-based registration scheme to that of zone-based registration scheme at the mobility model. Numerical results show that the registration load of the distance-based registration with call arrival is similar to that of the zone-based registration, and is equally distributed to all cells in a location area. So the proposed scheme can be effectively used in the limited radio resources.

• Journal of Welding and Joining
• /
• v.26 no.3
• /
• pp.45-50
• /
• 2008

SM45C steel rods being used generally for power transmission shafts and machine components was selected and welded by Butt-GMAW(Gas Metal Arc Welding) method. An estimation of fatigue life was studied by constructing S-N curve. Fatigue strength of base metal zone showed higher values than one of weld zone in low cycles between $10^4$ and $10^6$cycles. However, significant decrease in fatigue strength of base metal was found around $10^6$cycles, which were almost same as one of heat affected zone. This decrease was attributed that initial residual stress of the steel rods distributed by drawing process was diminished by continually applied load, and resulted in softening of base metal. The fatigue limit of the weld zone was highest in the boundary between deposited metal zone and heat affected zone, and followed by in the order of deposited metal zone, base metal zone, and heat affected zone. Based on these results, it is revealed that the stress for safety design of machine components using SM45C butt-welded steel rods must be selected within the region of the lowest fatigue limit of heat affected zone.

• Journal of Information Processing Systems
• /
• v.13 no.3
• /
• pp.500-517
• /
• 2017

In this paper, an improved zone-based routing protocol for heterogeneous wireless sensor networks is proposed. The proposed protocol has fixed the sized zone according to the distance from the base station and used a dynamic clustering technique for advanced nodes to select a cluster head with maximum residual energy to transmit the data. In addition, we select an optimal route with minimum energy consumption for normal nodes and conserve energy by state transition throughout data transmission. Simulation results indicated that the proposed protocol performed better than the other algorithm by reducing energy consumption and providing a longer network lifetime and better throughput of data packets.

• Journal of Digital Convergence
• /
• v.4 no.2
• /
• pp.67-73
• /
• 2006

This paper is an analysis of the Category Individual Residence urban spatial structure along the National Route BO (Koushu-Kaido), one of the major roads in Japan, and the degree of differences between locations and its changes between the points of time. The analysis was based on the GIS technique. Whilst, previous studies were based on municipal boundaries or mesh units as sources of data, GIS allowed the use of variable geographical units, Roadside zone, Inner zone, North zone, South zone, Blocks. As an example to apply the technology of GIS, 1986's and 1991's building polygon data of the Urban Planning Bureau of Tokyo Metropolitan Government are used. The layers referred to the analyses is the building polygons with the amount of stories, building area, floor area and the material of the building. Two statistical analysis are executed; one is the test of the regional equality about the number of story of building, building area, floor area and fireproof building ratio.

• 한국디지털정책학회:학술대회논문집
• /
• 2005.11a
• /
• pp.291-298
• /
• 2005

This paper is an analysis of the Category Individual Residence urban spatial structure along the National Route 20 (Koushu-Kaido), one of the major roads in Japan, and the degree of differences between locations and its changes between the points of time. The analysis was based on the GIS technique. Whilst, previous studies were based on municipal boundaries or mesh units as sources of data, GIS allowed the use of variable geographical units, Roadside zone, Inner zone, North zone, South zone, Blocks. As an example to apply the technology of GIS, 1986's sand 1991's building polygon data of the Urban Planning Bureau of Tokyo Metropolitan Government are used. The layers referred to the analyses is the building polygons with the amount of stories, building area, floor area and the material of the building. Two statistical analysis are executed; one is the test of the regional equality about the number of story of building, building area, floor area and fireproof building ratio.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.8
• /
• pp.729-735
• /
• 2012

A LQG/LTR(linear quadratic Gaussian/loop transfer recovery) controller with an integrator is designed to control the electro-hydraulic positioning system. Without considering the nonlinearity in the dead-zone, computer simulations are performed and show good performances and tracking abilities with the feedback controller based on the linear system model. However, the performance of the closed loop hydraulic positioning system shows big steady-state error in real system because of the dead-zone. In this paper, the feedback controller with a nonlinear compensator is introduced to overcome the dead-zone phenomenon in hydraulic systems. The inverse dead-zone as a nonlinear compensator is used to cancel out the dead-zone phenomenon. Experimental tests are performed to verify the performance of the controller.