• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.357-357
• /
• 2010

The electrical characteristics of ZnO thin film transistor (TFT) were investigated. ZnO thin layer was deposited by DC sputtering method and TFTs with ZnO channel layer were fabricated. On/off current ratio and saturated drain current of fabricated devices were improved by annealing in nitrogen ambient at various temperatures. As a result, the electrical characteristics of ZnO TFT were improved by post annealing in nitrogen ambient and it is important to optimize the annealing conditions for ZnO TFT fabrication.

• 반도체디스플레이기술학회지
• /
• 제13권3호
• /
• pp.35-38
• /
• 2014

Flat panel displays fabricated on glass substrate use amorphous Si for data processing circuit. Recent progress in display technology requires a new material to replace the amorphous Si, and ZnO is a good candidate. ZnO is a wide bandgap (3.3 eV) semiconductor with high mobility and good optical transparency. ZnO is usually grown by sputtering using ZnO ceramic target. However, ceramic target is more expensive than metal target, and making large area target is very difficult. In this work we studied characteristics of ZnO thin-film transistor grown by rf sputtering using Zn metal target and $CO_2$. ZnO film was grown at $450^{\circ}C$ substrate temperature, with -70 V substrate bias voltage applied. By using these methods, our ZnO TFT showed $5.2cm^2/Vsec$ mobility, $3{\times}10^6$ on-off ratio, and -7 V threshold voltage.

• 반도체디스플레이기술학회지
• /
• 제13권1호
• /
• pp.63-66
• /
• 2014

ZnO is a wide bandgap (3.3 eV) semiconductor with high mobility and good optical transparency. However, off-current characteristics of ZnO thin-film transistor (TFT) need improvements. In this work we studied the variation in ZnO TFT current under different annealing conditions. Annealing usually modifies gas adsorption at grain boundaries of ZnO. When oxygen is adsorbed, electron density decreases due to strong electronegativity of the oxygen, and TFT current decreases as a result. Our experiments showed that current increased after vacuum annealing and decreased after air annealing. We explain that the change of off-current is caused by the desorption and adsorption of oxygen at the grain boundaries.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.118-118
• /
• 2011

The Nano-Floating Gate Memory(NFGM) devices with ZnO:Cu thin film embedded in Al2O3 and AlOx-SAOL were fabricated and the electrical characteristics were evaluated. To further improve the scaling and to increase the program/erase speed, the high-k dielectric with a large barrier height such as Al2O3 can also act alternatively as a blocking layer for high-speed flash memory device application. The Al2O3 layer and AlOx-SAOL were deposited by MLD system and ZnO:Cu films were deposited by ALD system. The tunneling layer which is consisted of AlOx-SAOL were sequentially deposited at $100^{\circ}C$. The floating gate is consisted of ZnO films, which are doped with copper. The floating gate of ZnO:Cu films was used for charge trap. The same as tunneling layer, floating gate were sequentially deposited at $100^{\circ}C$. By using ALD process, we could control the proportion of Cu doping in charge trap layer and observe the memory characteristic of Cu doping ratio. Also, we could control and observe the memory property which is followed by tunneling layer thickness. The thickness of ZnO:Cu films was measured by Transmission Electron Microscopy. XPS analysis was performed to determine the composition of the ZnO:Cu film deposited by ALD process. A significant threshold voltage shift of fabricated floating gate memory devices was obtained due to the charging effects of ZnO:Cu films and the memory windows was about 13V. The feasibility of ZnO:Cu films deposited between Al2O3 and AlOx-SAOL for NFGM device application was also showed. We applied our ZnO:Cu memory to thin film transistor and evaluate the electrical property. The structure of our memory thin film transistor is consisted of all organic-inorganic hybrid structure. Then, we expect that our film could be applied to high-performance flexible device.----못찾겠음......

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권1호
• /
• pp.26-29
• /
• 2006

Transparent ZnO thin films were prepared by KrF pulsed laser deposition (PLD) technique and applied to a bottom-gate type thin film transistor device as an active channel layer. A high conductive crystalline Si substrate was used as an metal-like bottom gate and SiN insulating layer was then deposited by LPCVD(low pressure chemical vapour deposition). An aluminum layer was then vacuum evaporated and patterned to form a source/drain metal contact. Oxygen partial pressure and substrate temperature were varied during the ZnO PLD deposition process and their influence on the thin film properties were investigated by X-ray diffraction(XRD) and Hall-van der Pauw method. Optical transparency of the ZnO thin film was analyzed by UV-visible phometer. The resulting ZnO-TFT devices showed an on-off ration of $10^6$ and field effect mobility of 2.4-6.1 $cm^2/V{\cdot}s$.

• 반도체디스플레이기술학회지
• /
• 제16권2호
• /
• pp.94-97
• /
• 2017

Amorphous Si has been used for data processing circuits in flat panel displays. However, low mobility of the amorphous Si is a limiting factor for the data transmission speed. Metal oxides such as ZnO have been studied to replace the amorphous Si. ZnO is a wide bandgap (3.3 eV) semiconductor with high mobility and good optical transparency. When ZnO is grown by sputtering with $O_2$ as an oxidizer, there can be many ion species arising from $O_2$ decomposition. $O^+$, $O_2{^+}$, and $O^-$ ions are expected to be the most abundant species, and it is not clear which one contributes to the ZnO growth. We applied alternating substrate voltage (0 V and -70 V) during sputtering growth. We studied changes in transistor characteristics induced by the voltage switching. We also compared ZnO grown by dc and rf sputtering. ZnO film was grown at $450^{\circ}C$ substrate temperature. ZnO thin-film transistor grown with these methods showed $7.5cm^2/Vsec$ mobility, $10^6$ on-off ratio, and -2 V threshold voltage.

• ETRI Journal
• /
• 제34권2호
• /
• pp.280-283
• /
• 2012

By inserting $H_2O$ treatment steps during atomic layer deposition of a ZnO layer, the turn-on voltage shift from negative bias stress (NBS) under illumination was reduced considerably compared to that of a device that has a continuously grown ZnO layer without any treatment steps. Meanwhile, treatment steps without introducing reactive gases, and simply staying under a low working pressure, aggravated the instability under illuminated NBS due to an increase of oxygen vacancy concentration in the ZnO layer. From the experiment results, additional oxidation of the ZnO channel layer is proven to be effective in improving the stability against illuminated NBS.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.374-377
• /
• 2009

The characteristics of the deposited thin films of the zinc oxide (ZnO) at different oxygen pressures will be elucidated in this work. The resistivity of ZnO thin films were dominated by the carrier concentration under high oxygen pressure conditions while controlled by the carrier mobility at low oxygen ambiences. In addition, we will show the characteristics of the transparent ZnO based thin film transistor (TFT) fabricated at a full room temperature process with gate dielectric of gadolinium oxide ($Gd_2O_3$) thin films.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.579-580
• /
• 2011

• 마이크로전자및패키징학회지
• /
• 제14권3호
• /
• pp.15-20
• /
• 2007

플라스틱 기판에 적용이 가능한 최대 공정온도 $270^{\circ}C$ 이하에서 ZnO-TFT 소자를 제작하였다. ZnO-TFT 소자는 bottom gate 구조로 제작되었으며, ICP-CVD로 형성된 $SiO_2$ 산화물 게이트 공정을 제외하고는 모든 박막증착 공정은 RF-magnetron sputtering process를 이용하였다. ZnO 박막은 Ar과 $O_2$ gas 유량의 비율에 따라 여러 가지 조건에서 RF-magnetron sputtering 시스템을 이용하여 상온에서 증착하였다. Ar과 $O_2$ gas의 비율에 따라 제작된 TFT 소자는 모두 enhancement 모드의 소자특성을 나타내었고, 또한 가시광선영역에 있어 80% 이상의 높은 투과율을 보였다. ZnO 증착시 순수 Ar을 사용하여 제작된 ZnO-TFT의 경우에, $1.2\;cm^2/Vs$의 field effect mobility, 8.5 V의 threshold voltage, 그리고 $5{\times}10^5$의 높은 on/off ratio, 1.86 V/decade의 swing voltage로 가장 우수한 전기적 특성을 보였다.