• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.329-329
• /
• 2016

Large-area graphene films produced by means of chemical vapor deposition (CVD) are polycrystalline and thus contain numerous grain boundaries that can greatly degrade their performance and produce inhomogeneous properties. A better grain boundary engineering in CVD graphene is essential to realize the full potential of graphene in large-scale applications. Here, we report a defect-selective atomic layer deposition (ALD) for stitching grain boundaries of CVD graphene with ZnO so as to increase the connectivity between grains. In the present ALD process, ZnO with hexagonal wurtzite structure was selectively grown mainly on the defect-rich grain boundaries to produce ZnO-stitched CVD graphene with well-connected grains. For the CVD graphene film after ZnO stitching, the inter-grain mobility is notably improved with only a little change in free carrier density. We also demonstrate how ZnO-stitched CVD graphene can be successfully integrated into wafer-scale arrays of top-gated field effect transistors on 4-inch Si and polymer substrates, revealing remarkable device-to-device uniformity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.145.1-145.1
• /
• 2013

A prerequisite for the development of graphene-based field effect transistors (FETs) is reliable control of the type and concentration of carriers in graphene. These parameters can be manipulated via the deposition of atoms, molecules, and polymers onto graphene as a result of charge transfer that takes place between the graphene and adsorbates. In this work, we demonstrate a unique and facile methodology for the homogenous and stable p-type doping of graphene by hybridization with ZnO thin films fabricated by MeV electron beam irradiation (MEBI) under ambient conditions. The formation of the ZnO/graphene hybrid nanostructure was attributed to MEBI-stimulated dissociation of zinc acetate dihydrate and a subsequent oxidation process. A ZnO thin film with an ultra-flat surface and uniform thickness was formed on graphene. We found that homogeneous and stable p-type doping was achieved by charge transfer from the graphene to the ZnO film.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.638-638
• /
• 2013

ZnO는 넓은 밴드갭(3.37 eV)를 가지기 때문에 UV detector로 유용하게 쓰일 수 있다. 본 연구에서는 Graphene 위에 ZnO nanorod를 hydrothermal 방법을 사용하여 성장한 후 Graphene 위에 전극을 형성한 후 UV 센서를 제작하였다. Si의 기판위에 SiO2의 막을 증착을 하고 그 위에 Graphene을 전도시킨다. Graphene위에 ZnO nanorod의 성장을 위해서 ZnO seed layer를 sputtering 방법으로 얇게 증착을 시킨다. ZnO nanorod의 성장은 hydrothermal의 방법으로 Zinc nitrate hexahydrate와 암모니아를 수용액에 넣은 후 $80^{\circ}C$에서 성장하였다. Graphene 위에 ZnO가 없는 부분에 전극을 형성하여 UV의 세기에 따른 IV 전기적 특성의 변화를 관측한다.

• Journal of the Korean Physical Society
• /
• v.73 no.10
• /
• pp.1546-1549
• /
• 2018

We have investigated core-levels of ZnO thin films at the interface with the graphene on Cu foil using in-situ X-ray Photoelectron Spectroscopy (XPS). Spectral evolution of C 1s, Zn 2p, and O 1s are observed in real time during RF sputtering deposition. We found binding energy (BE) shifts of Zn 2p and 'Zn-O' state of O 1s depending on ZnO film thickness. Core-levels BE shifts of ZnO will be discussed on the basis of electron transfer at the interface and it may have an important role in the electronic transport property of the ZnO/graphene-based electronic device.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.164.2-164.2
• /
• 2014

In order to combine advantages of ZnO thin film transistors (TFTs) with a high on-off ratio and graphene TFTs with extremely high carrier mobility, we present a facile methodology for fabricating ZnO thin film/graphene hybrid two-dimensional TFTs. Hybrid TFTs exhibited ambipolar behavior, an outstanding electron mobility of $329.7{\pm}16.9cm^2/V{\cdot}s$, and a high on-off ratio of $10^5$. The ambipolar behavior of the ZnO/graphene hybrid TFT with high electron mobility could be due to the superimposed density of states involving the donor states in the bandgap of ZnO thin films and the linear dispersion of monolayer graphene. We further established an applicable circuit model for understanding the improvement in carrier mobility of ZnO/graphene hybrid TFTs.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.1
• /
• pp.71-75
• /
• 2022

Graphene oxide was stirred with a ZnCl₂:NaCl electrolyte and electrochemically coated by cyclic voltammetry to simplify the electron transpfer layer film forming process for organic solar cells and to fabricate an organic solar cell having it. The device structure is FTO/ZnO:graphene/P3HT:PCBM/PEDOT:PSS/Ag. Morphology and chemical properties of ETL were confirmed by scanning electron microscopy(SEM), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. As a result of XPS measurement, ZnO metal oxide and carbon bonding were simultaneously confirmed, and ZnO and graphene peaks were confirmed by Raman spectroscopy. The electrical characteristics of the manufactured solar cell were specified with a solar simulator, and the ETL device coated twice at a rate of 0.05 V/s showed the highest photoelectric conversion efficiency of 1.94%.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.12
• /
• pp.3586-3590
• /
• 2013

We present here an efficient and simple method for preparation of highly active heterogeneous ZnO photocatalyst (graphene oxide-zinc oxide: GO-ZnO), specifically by deposition of ZnO nanoparticles onto thiolated GOs. The resultant GO-ZnO sample was characterized by TEM, XRD, Auger, XPS, and Raman measurements, revealing that the size-similar and quasi-spherical ZnO nanoparticles were anchored to the thiolated GO surfaces. The average particle diameter was about 2.5 nm. In the photodegradation of methylene blue (MB) under ultraviolet (UV) light, GO-ZnO exhibited remarkably enhanced photocatalytic efficiency compared with thiolated GO and pure ZnO particles. This strong photocatalytic performance of GO-ZnO can be attributed to the suppression of electron recombination and the enhancement of mass transportation. The results showed that thiolated GO is the preferable supporting material.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.280.2-280.2
• /
• 2016

The graphene, a single atomic sheet of graphite, has attracted tremendous interest owing to its novel properties including high intrinsic mobility, optical transparency and flexibility. However, for more diverse application of graphene devices, it is essential to tune its transport behavior by shifting Dirac Point (DP) of graphene. So, in the following context, we suggest a method to tune structural and electronic properties of graphene using atomic layer deposition. By atomic layer deposition of zinc oxide (ZnO) on graphene using 4-mercaptophenol as linker, we can fabricate n-doped graphene. Through ${\pi}-{\pi}$ stacking between chemically inert graphene and 4-mercaptophenol, conformal deposition of ZnO on graphene was enabled. The electron mobility of graphene TFT increased more than 3 times without considerably decreasing the hole mobility, compared to the pristine graphene. Also, it has high air stability. This ZnO doping method by atomic layer deposition can be applicable to large scale array of CVD graphene TFT.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.507-508
• /
• 2012

• Journal of Adhesion and Interface
• /
• v.12 no.4
• /
• pp.133-137
• /
• 2011

Exfoliated graphite oxide (EGO) was prepared by graphite oxide in an aqueous solution of TMAOH. The hybrid graphene/Zn-Al LDH material was fabricated by the hydrothermal reduction of the solution of EGO, $Zn(NO_3)_2{\cdot}6H_2O$, $Al(NO_3)_3{\cdot}9H_2O$, urea, and trisodium citrate. That is, metal ions were absorbed on the surface of EGO, and Zn-Al LDH material was randomly dispersed on the surface of graphene along with a reduction process of EGO to graphene by hydrothermal treatment. The composition, morphology, and thermal property of the obtained graphene-based hybrid material were studied by FE-SEM, EDX, TEM, FT-IR, XRD, TGA, and DSC.