• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.22-24
• /
• 1995

The electrical conductivity of TiO$_2$doped ZnO was investigated by means of complex impedance measurement and voltage-current source and meaurement unit. The e1ectrical conductivity of TiO$_2$added ZnO was increased with increasing the concentration of TiO$_2$. The calculated relative dielectric constant was decreased with increasing the concentration of TiO$_2$. The increase of electrical conductivity seems to be the effect of TiO$_2$donor doping.

• Journal of the Korean Physical Society
• /
• v.73 no.12
• /
• pp.1884-1888
• /
• 2018

We have employed electron paramagnetic resonance spectroscopy and magnetization measurements in order to study the effect of Al-incorporation on the magnetic interactions in ZnO:Mn diluted magnetic semiconductors. Al-doping is shown to decrease the antiferromagnetic correlation and to increase the ferromagnetic interaction, which is attributed to the hydrogen-mediated ferromagnetic Mn complexes in our Mn-doped ZnO samples.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.5
• /
• pp.524-533
• /
• 2008

Industrial wastewater generated in the electroplating and metal finishing industries typically contain toxic free and complex metal cyanide with various heavy metals. Alkaline chlorination, the normal treatment method destroys only free cyanide, not complex metal cyanide. A novel treatment method has been developed which destroys both free and complex metal cyanide as compared with Practical Plant(I). Prior to the removal of complex metal cyanide by Fe/Zn coprecipitation and removal of others(Cu, Ni), Chromium is reduced from the hexavalent to the trivalent form by Sodium bisulfite(NaHSO$_3$), followed by alkaline-chlorination for the cyanide destruction. The maximum removal efficiency of chromium by reduction was found to be 99.92% under pH 2.0, ORP 250 mV for 0.5 hours. The removal efficiency of complex metal cyanide was max. 98.24%(residual CN: 4.50 mg/L) in pH 9.5, 240 rpm with 3.0 $\times$ 10$^{-4}$ mol of FeSO$_4$/ZnCl$_2$ for 0.5 hours. The removal efficiency of Cu, Ni using both hydroxide and sulfide precipitation was found to be max. 99.9% as Cu in 3.0 mol of Na$_2$S and 93.86% as Ni in 4.0 mol of Na$_2$S under pH 9.0$\sim$10.0, 240 rpm for 0.5 hours. The concentration of residual CN by alkaline-chlorination was 0.21 mg/L(removal efficiencies: 95.33%) under the following conditions; 1st Oxidation : pH 10.0, ORP 350 mV, reaction time 0.5 hours, 2nd Oxidation : pH 8.0, ORP 650 mV, reaction time 0.5 hours. It is important to note that the removal of free and complex metal cyanide from the electroplating wastewater should be employed by chromium reduction, Fe/Zn coprecipitation and, sulfide precipitation, followed by alkaline-chlorination for the Korean permissible limit of wastewater discharge, where the better results could be found as compared to the preceding paper as indicated in practical treatment(I).

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.304-309
• /
• 2001

With the development of electromagnetic communication technology and increased use of electromagnetic wave, the countermeasure of EMI(Electromagnetic Interference) becomes more important socially, and interest for the electromagnetic wave absorber has also increased. In this paper, we have studied characteristics of frequency dependency on complex permittivity and complex permeability according to the changes of composition rate and sintering temperature of NiCuZn ferrite also known as electromagnetic wave absorber and further looked into effect of electromagnetic wave absorption properties. From the measurement where the composition of Fe$_2$O$_3$ and ZnO of NiCuZn ferrite was fixed at 49 and 34 mol% respectively while composition of NiO and CuO has been varied at each test, we found out that initial permeability and permittivity were high and the absorbing ability of electromagnetic wave recorded best with loss tangent(${\mu}$r"/${\mu}$r′) displays more than 1 within the frequency band of 2MHz～9.5MHz when the composition ratio of NiO was ranged around 8.5～9.5 mol% and the sintering temperature was 1,080$^{\circ}C$.

• Nuclear Engineering and Technology
• /
• v.11 no.1
• /
• pp.47-54
• /
• 1979

A field experiment has been carried out to evaluate the residual effect of zinc fertilizers by rice plant grown under flooded conditions in the field. The results obtained are summarized as fellows ; Residual effect of zinc fertilizers on yields of rough and hulled grains showed slight increases. Effect of zinc application methods on yields of the grains were shown that zinc mixed treatment could be more effectively utilized than treatment of zinc on the soil surface. In case of levels of zinc application, 5 kg zinc per hectare represented high yields of the grains than those obtained from 10kg and 20kg zinc placement per hectare respectively. Regarding the form of zinc fertilizers, the urea-zinc complex showed less effective on yields of the grains than did the zinc sulfate. This phenomenon was consistent with the previous result. Yields of total zinc in rice plant grown on the rice straw added soils (Treatment No. 2 and 8) and the urea-zinc complex treated soil were increased markedly as compared to those data obtained from the previous year. The percentage of zinc derived from fertilizer decreased largely as compared to that of the first year crop. The yield of fertilizer zinc in rice plant decreased slightly in the most zinc treatments but in the case of treatments of zinc mixed with the straw added soil and the urea-zinc complex increased reversely as compared to the previous results. The mixed application of zinc with soil showed higher yield of fertilizer zinc than the soil surface placement. Approximately from 4.6 to 24.3 per cent of zinc taken up by rice plants were derived from the fertilizer zinc. Zinc fertilizer use efficiency ranged from 0.213 to 0.584 per cent when 5 kg zinc per hectare applied.

• Journal of the Korean Ceramic Society
• /
• v.50 no.3
• /
• pp.231-237
• /
• 2013

Thermodynamic modeling of the $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ complex ferrite system has been adopted as a rational approach to establish routes to better synthesis conditions for pure phase $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ complex ferrite. Quantitative analysis of the different reaction equilibria involved in the precipitation of $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ from aqueous solutions has been used to determine the optimum synthesis conditions. The spinel ferrites, such as magnetite and substitutes for magnetite, with the general formula $MFe_2O_4$, where M= $Fe^{2+}$, $Co^{2+}$, and $Ni^{2+}$ are prepared by coprecipitation of $Fe^{3+}$ and $M^{2+}$ ions with a stoichiometry of $M^{2+}/Fe^{3+}$= 0.5. The average particle size of the as synthesized $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$, measured by transmission electron microscopy (TEM), is 14.2 nm, with a standard deviation of 3.5 nm the size when calculated using X-ray diffraction (XRD) is 16 nm. When $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ ferrite is annealed at elevated temperature, larger grains are formed by the necking and mass transport between the $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ ferrite nanoparticles. Thus, the grain sizes of the $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ gradually increase as heat treatment temperature increases. Based on the results of Thermogravimetric Analysis (TGA) and Differential Scanning Calorimeter (DSC) analysis, it is found that the hydroxyl groups on the surface of the as synthesized ferrite nanoparticles finally decompose to $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ crystal with heat treatment. The results of XRD and TEM confirmed the nanoscale dimensions and spinel structure of the samples.

• The Korean Journal of Ecology
• /
• v.19 no.3
• /
• pp.261-270
• /
• 1996

To investigate the degree of contamination from Korean coastal region, the concentrations of Cu, Pb, Zn and Cd in sediments, seawater and oyster (Crassostrea gigas) at Masan Bay, Onsan Bay, Daesan industrial complex and their control areas were analysed. Values for sediments, seawater and oyster in the industrial complex coastal region were higher than those in the control area except for seawater in Daesan. The values for dissolved phasc of Cu, Pb, Zn and Cd in seawater showed 0.3~1.75 ${\mu}g/l$, 0.013~0.12 ${\mu}g/l$, 0.20~6.14 ${\mu}g/l$ and 0.007~0.021 ${\mu}g/l$, respectively. The concentrations of Cu, Pb, Zn and Cd in sediments werd 12.0~47.8 ${\mu}g/g$, 6.16~59.5 ${\mu}g/g$, 43.0~230 ${\mu}g/g$ and 0.52~11.2 ${\mu}g/g$, respectively. The concentrations of Cu, Pb, Zn and Cd in oyster showed 12.1~85.6 ${\mu}g/g$, 0.267~1.48 ${\mu}g/g$, 1, 070~3, 250 ${\mu}g/g$ and 3.23~7.71 ${\mu}g/g$, respectively. The contents of heavy metals in oysters at industrial complex coastal region showed that they were not seriously contaminated compared with those of Mussel Watch (1992).

• Advances in nano research
• /
• v.1 no.2
• /
• pp.93-103
• /
• 2013

An ultrasonic-mediated assisted stepwise method has been developed for depositing transparent ZnO films from aqueous solution. Rinsing in low ethylene glycol temperature was easy to produce intermediate phase of $Zn(OH)_2$, rinsing in $120^{\circ}C$ ethylene glycol was observed the diffraction peak of intermediate $Zn(OH)_2$ in early report, the rinsing temperature plays an important role in the process of $Zn(OH)_2$ phase transformed to ZnO, high rinsing temperature actually improved the intermediate phase. However, the effect of rinsing on the intermediate phase is yet to be understood clearly. The effect of different rinsing procedures, involving either of or a combination of successive ionic layer adsorption and reaction (SILAR) and ultrasonic-assisted rinsing, prior to hydrolysis in ethylene glycol was found to improve the occurrence $Zn(OH)_2$ in ZnO thin films. In the zinc complex ($[Zn(NH_3)_4]^{2+}$) solution, excess ($[Zn(NH_3)_4]^{2+}$) absorbed in glass substrate transformed incompletely to ZnO and exist as $Zn(OH)_2$ phase in thin films. In films deposited at low temperature, rinsing procedure is applied to improve excess $Zn(OH)_2$ and obtain smoother transparent thin films.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.12
• /
• pp.4247-4252
• /
• 2011

The porphyrin-incorporated arylether dendrimers ZnP-D1 and ZnP-D4 were investigated to discover the influence of dendritic environments for the axial ligation of pyridine and photoinduced electron transfer by methyl viologen. Absorption and fluorescence spectra of ZnP, ZnP-D1, and ZnP-D4 were measured in dichloromethane with the addition of pyridine or methyl viologen dichloride. Axial ligation of pyridine was confirmed by red-shifted absorption spectrum. The complex formation constants $K_f$ (Table 1) for axial coordination of pyridine on ZnP, ZnP-D1, and ZnP-D4 were estimated to be $4.4{\times}10^3\;M^{-1}$, $3.3{\times}10^3\;M^{-1}$, and $1.7{\times}10^3\;M^{-1}$, respectively. The photoinduced electron transfer to methyl viologen dichloride was confirmed by fluorescence quenching. Stern-Volmer constants Ksv for ZnP, ZnP-D1, and ZnP-D4 were calculated to be $2.6{\times}10^3$, $2.5{\times}10^3$, and $2.1{\times}10^3$, respectively. ZnP-D4 surrounded by 4 aryl ether dendrons shows the smallest $K_f$ and Ksv values, with comparison to ZnP and ZnP-D1.

• Journal of the Korean Magnetics Society
• /
• v.6 no.6
• /
• pp.382-387
• /
• 1996

The characteristics of the complex permeability of ${(Ni_{x}Cu_{0.2}Zn_{0.8-x}O)}_{1-w}{(Fe_{2}O_{3})}_{1+w}$ with various Ni and $Co_{3}O_{4}$ contents were investigated in this work. It is found that the NiCuZn ferrites with $x{\geq}0.6$ have a relatively small peak width of the imaginary part of permeability $\mu$". The resonance frequency is increased as Ni content becomes higher, where the loss is low. The $\mu$" value decreases with increasing FezO, deficiency, but the resonance frequency($f_{\mu"max}$) is only slightly affected by $Fe_{2}O_{3}$ deficiency. In case of $Co_{3}O_{4}$ addition to the NiCuZn ferrites, the $f_{\mu"max}$ increases since the initial permeability decreases with the amount of $Co_{3}O_{4}$. It is concluded that the Ni content in the NiCuZn ferrite is a dominant factor for the total loss of these spinel ferrites.