• Journal of Environmental Impact Assessment
• /
• v.19 no.4
• /
• pp.443-452
• /
• 2010

본 연구에서는 도시지역의 하나인 주거지역에서 배출되는 강우유출수 내에 중금속이 장치형 비점 오염저감시설 중에 하나인 와류형시설에서 제거되는 특성을 파악하고자, 대상 중금속을 Zn으로 삼고 2007년 4월부터 2008년 11월까지 모니터링을 수행하였다. 유출수 모니터링은 와류형 시설의 유입부와 유출부에서 유량과 수질을 각각 시간변화에 따라 측정하였으며, 시설유입부와 유출부, 그리고 시설하부에 쌓인 침전물을 채취하여 침전물 모니터링도 수행하였다. 그 결과, 높은 강우강도에서 발생된 강우유출수는 와류형 시설내에 HRT를 감소시켜 Zn의 제거효율이 낮게 관측되었으며, 특히 HRT가 20분이내의 조건이 될 경우에는 처리효과가 없는 것으로 확인되었다. Zn는 입자성물질과 밀접한 관계를 맺으며 제거되는 특성을 보였으며, 입자성물질이 스크린에 의한 여과 및 침전작용이 일어날 때 입자성물질에 부착되어 거동하는 특성을 보였다. 그 중에 0.075mm 이하의 미세한 입자에 부착된 고농도의 Zn는 제거되지 못하였고, 와류형 시설 후단에 후처리시설로서 저류시설을 두어 충분한 HRT를 제공한 결과, 와류형 시설만을 운전하였을 때와 비교하여 높은 제거특성을 보이게 되었다.

• Corrosion Science and Technology
• /
• v.9 no.2
• /
• pp.87-91
• /
• 2010

It is pointed out that non-wetting behavior of liquid Zn alloy occurs on high-tensile strength steels, which usually contain Si and Mn. There have been a lot of investigations to improve the above wettability of liquid Zn alloy with steels containing Si and Mn. Although those studies evaluated the wettability qualitatively by observation of the surface of steels galvanized by Zn or exfoliation test of Zn with substrate steels and so on, it is required to evaluate the wettability of liquid Zn with steels by measuring contact angle, work of adhesion, spreading velocity etc. which are usually used to assessment of general wetting behavior. In the present work, we evaluated the wettability of liquid Zn with steels containing Si and Mn by applying a sessile drop method to measure the change in contact angle and diameter of liquid Zn droplet wetted on steels.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.5
• /
• pp.236-241
• /
• 2016

This study conducted a screening-level ecological risk assessment for heavy metals in dredged sediment for recycling in terrestrial environment. Toxicological information of six heavy metals (i.e., Cu, Zn, Cd, Pb, Cr, and Ni) was collected from ECOTOX of US Environmental Protection Agency, and screened and qualified for the use in the screening-level ecological risk assessment. According to the number of terrestrial ecological receptors for which toxicological information is available, PNEC (Predicted No Effect Concentration) of each heavy metal was derived using either stochastic approach (for Cu, Zn, and Cd), or deterministic approach (for Pb, Cr, and Ni). Hazard quotients of the six heavy metals were derived for a field-collected dredged sediment using the PNEC derived and the PEC (Predicted Environmental Concentration) determined for the dredged sediment. The HQs of Cu, Zn, Cr, Pb and Ni were higher than unity indicating a possibility of ecological risk of the five heavy metals when the dredged sediment is applied in terrestrial environment. Accordingly, remediation processes or a higher-level ecological risk assessment would be needed for the recycling of the material.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.11
• /
• pp.634-640
• /
• 2017

Toxicity and fate assessment is necessary in the evaluation of the environmental, health and safety risks of engineered nanomaaterials (ENMs). Therefore, in order to ensure the reproducibility, reliability and relevance of ENMs toxicity results, stable and monomodal dispersion protocols in toxicity test media are needed. Zinc oxide nanoparticles (nZnO) are widely used in various products such as cosmetic products, paper, paints etc. In this study, nZnO dispersions in ecotoxicity test media were produced by following a series of steps of modified National Institute of Standards and Technology (NIST) Special publication 1200-5. In addition, natural organic matter (humic acid (HA)) was used as a stabilizing agent to disperse nZnO in the test media. The hydrodynamic diameters (HDD) of the nZnO in dispersion ranged between 150 and 200 nm according to the dynamic light scattering (DLS) measurement. Based on these dispersions in ecotoxicity test using ecological species (Oryzias latipes, Daphnia magna, Pseudokirchneriella subcapitata and Chironomusus riparius), dispersion protocol was found to have a considerable potential in ecotoxicity test of ENMs.

• Korean Journal of Materials Research
• /
• v.30 no.5
• /
• pp.252-261
• /
• 2020

We prepare ZnO nanoparticles by environmentally friendly synthesis using Cyathea nilgiriensis leaf extract. Various phytochemical constituents are identified through the assessment of ethanolic extract of plant Cyathea nilgiriensis holttum by GC-MS analysis. The formation of ZnO nanoparticles is confirmed by FT-IR, XRD, SEM-EDX, TEM, SAED and PSA analysis. TEM observation reveals that the biosynthesized ZnO nanopowder has a hexagonal structure. The calculated average crystallite size from the high intense plane of (1 0 1) is 29.11 nm. The particle size, determined by TEM analysis, is in good agreement with that obtained by XRD analysis. We confirm the formation of biomolecules in plant extract by FT-IR analysis and propose a possible formation mechanism of ZnO nanoparticles. Disc diffusion method is used for the analyses of antimicrobial activity of ZnO nanoparticles. The synthesized ZnO nanoparticles exhibit antimicrobial effect in disc diffusion experiments. The biosynthesized ZnO nanoparticles display good antibacterial performance against B. subtilis (Gram-positive bacteria) and K. pneumonia (Gram-negative bacteria). Bio-synthesized nanoparticles using green method are found to possess good antimicrobial performance.

• Journal of Environmental Science International
• /
• v.16 no.12
• /
• pp.1451-1462
• /
• 2007

Heavy metal concentrations in the soil were investigated for the abandoned Samkwang metal mine, Cheongyang-Gun, Chungnam Province, Korea. The concentrations of heavy metal(As, Cd, Cu, Ni, Pb, Zn) were determined in mine soils collected at the abandoned mine sites to obtain a general classification and specification of the pollution in this highly polluted region. The results estimated with the normal test and basis statistic on the central tendency and variation showed that the distribution of heavy metal concentration had significantly different at the range of all locations. The range of spatial distribution on the relationship of heavy metal concentration and pH was $4.8{\sim}8.8$ and heavy metal concentration on the type of land use was highest in forest land, and also Ni and Zn in farm and rice field showed the high concentration. The distribution of heavy metal concentration on the depth of a soil showed that the metal concentrations in subsoil were higher than of those in surface soil, while the concentration of Cu and Ni had no significant difference on the depth of soil. Results from the correlation analysis using the data except the extreme and unusual data revel that Zn-Cd(r=0.867), Zn-As(r=0.797), Zn-Pb(r=0.764), Cu-Cd(r=0.673), Cu-As(r=0.614) and Zn-Ni(r=0.605) were the most important parameters in assessing variations of heavy metal in soil. To discriminate pattern differences and similarities among samples, principal factor analysis(PFA) and cluster analysis(CF) were performed using a correlation matrix. This study suggests that PFA and CF techniques are useful tools for identification of important heavy metal and parameters. This study presents the necessity and usefulness of multivariate statistical assessment of complex databases in order to get better information about the quality of soil and gives the basis information to clean up the abandoned mine sites.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.21 no.4
• /
• pp.125-133
• /
• 2016

We investigated the distribution of organic matter and trace metals in surface sediment from Tonyeong coast. To determine the status of trace metal pollution, we also conducted an ecological risk assessment. Relatively high concentration of TN (total nitrogen), TOC (total organic carbon), and AVS (acid volatile sulfide) was found in surface sediment located in the narrow channel (site 35-38). Spatial distribution of Cd, Cr, Ni, Co, Hg, and Zn in surface sediment was similar and high Cu concentrations were found in narrow channel. The assessment of heavy metal pollution was derived using the Enrichment factors (EF). The enrichment factor indicated that Cd was no enrichment (EF<1), Pb, Cr, Ni, Co, Zn, and Hg were minor enrichment (1

• Economic and Environmental Geology
• /
• v.37 no.1
• /
• pp.21-33
• /
• 2004

The objective of this study is to review of environmental assessment of heavy metals derived from various metalliferous mines in Korea. As a results of national wide research for heavy metal contaminations in the vicinity of metalleferous mines, the main contaminants are mine waste materials including tailings. From the materials, toxic elements including As, Cd, Cu, Pb and Zn can be dispersed into downstream through wind and water. Thus, soils around the mines contain elevated levels of those elements, which are over the guide values for environmental regulation of soils in Korea. Arsenic is one of the most important elements contaminated by mining activities, to a less extent, Cd, Cu, Pb and Zn. In spite of remediation works for some metal mines by the government, there are still lots of abandoned mines which are necessary for reclamation of mining sites. This study also includes that metal concentrations in soils and tailings can be varied upon various decomposition methods including 0.1N HC1 and aqua regia and sequential extraction scheme, with differences in each element, too. This may be due to geochemical characteristics of the elements, such as solubility, mobility and chemical forms in the geochemical environment. Finally, it is suggested that a certain organization should be runned by Korean government for management of abandoned mines.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.5
• /
• pp.555-566
• /
• 1996

In order to assess the long-term airborne concentrations of 6 metals such as Cr, Cd, Pb, Zn, K, and Na and the associated health resk, a great number of PM-10 samples were collected and analyzed in Kyung Hee University-Suwon Campus for three years from 1991 to 1993. The 3-year average concentration of Pb in respirable particulate matters was 142.6 ng/m$^{3}$ while that of Zn was 1,210.5ng/m$^{3}$. The corresponding hazard index from Pb Zn for the ingalation route was estimated to be 9.5.times.10$^{-2}$ and 3.5.times.10$^{-2}$ , respectively. Therefore, it can be said that there was no adverse chronic health effects by airborne Pb and Zn. However, the 2-year average concentration of Cr(6) was estimated to be 1.3ng/m$^{3}$ shile the 3-year average concentration of Cd was 3.1ng/m$^{3}$. The total cancer risk by these two metals for the inhalation route was estimated to be about 7.2.times.10$^{-6}$ . This order-of-magnitude risk estimate suggests that the ingalation risk in the study area from all carcinogenic metals including As and Ni (subsulfide) might exceed the acceptable risk criteria of 10$^{-5}$ -10$^{-6}$ by U.S.EPA.For a better risk assessment in the future, alveolar deposition of PM-10 in the study area were also discussed and an assessment was done.

• Journal of information and communication convergence engineering
• /
• v.3 no.3
• /
• pp.131-136
• /
• 2005

The effects of the deposition temperature on the growth characteristics of the ZnO films were studied for film bulk acoustic wave resonator (FBAR) device applications. All films were deposited using a radio frequency (RF) magnetron sputtering technique. It was found that the growth characteristics of the ZnO films have a strong dependence on the deposition temperature from 25 to $350^{\circ}C$. The ZnO films deposited below $200^{\circ}C$ exhibited reasonably good columnar grain structures with a highly preferred c-axis orientation while those above 200°C showed very poor columnar grain structures with a mixed-axis orientation. This study seems very useful for the future FBAR device applications.