• 보존과학회지
• /
• 제37권4호
• /
• pp.340-356
• /
• 2021

We have tried the experimental research of lost-wax casting to reconstruct Gilt-Bronze Pensive Bodhisattva; preliminary and reconstruction experiment based on ancient texts. Main object to reconstruct is Korean National Treasure No.83, Gilt-Bronze Pensive Bodhisattva (Maitreya), then we measure alloy ratio and casting method based on the scientific analysis. Other impurities were removed from the base metal components(copper : tin : lead) and their ratio was set to 95.5 : 6.5 : 3 where the ratios for tin and lead were increased by 2.5% each. The piece-mold casting method was used, and piece-mold casting experiments were carried out twice in this study but supplementary research on piece-mold casting was necessary. The microstructure was confirmed to be typical cast microstructure and the component analysis result was similar to that of the prior study. Analysis of the chemical composition is confirmed to copper, tin, lead, and zinc, and the chemical composition of the matrix was 87.8%Cu-7.5%Sn-2.7%Pb-2.1%Zn, and similar to previous experimental research. Also resulted in the detection of small impurity in Zn. Analysis of the mould revealed that the mould was fabricated by adding quartz and organic matter for structural stability, fire resistance, and air permeability. We expect that our research will contribute to provide base data for advanced researches in future.

• 반도체디스플레이기술학회지
• /
• 제20권4호
• /
• pp.125-129
• /
• 2021

We investigated the electronic property and atomic structure for chalcopyrite (CH) Al_xGa_1-xAs semiconductor by using first-principles FPLMTO method. The CH-Al_xGa_1-xAs exhibits a p-type semiconductor with a direct band-gap. For low Al concentration unoccupied hole-carriers are induced, but for high Al concentration it is formed a localized bonding or anti-bonding state below Fermi level. The hybridization of Al(3s)-Ga(4s, or 4p) is larger than that of Al(3s)-As(4s, or 4p). And the Al film on As-terminated surface, Al/AsGa(001), is more energetically favorable one than that on Ga-terminated (001) surface. Consequently, the band-gap of CH-Al_xGa_1-xAs system increases exponentially with increasing Al concentration. The change of lattice parameter is shown two different configurations with increasing Al concentration. The calculated lattice parameters for CH-Al_xGa_1-xAs system are compared to the experimental ones of zinc-blend GaAs and AlAs.

• 박물관보존과학
• /
• 제16권
• /
• pp.56-81
• /
• 2015

족자 고리는 끈이나 유소를 고정시켜 걸 수 있도록 하는 장황 부속품으로 형태가 다양하며 여러 금속재를 사용하여 제작되었다. 현재 전통 형식의 고리는 대부분 개장으로 인해 유실되었으며, 일본식 고리를 사용하고 있다. 따라서 본 연구에서는 국립중앙박물관에 소장된 전통 족자 19점을 대상으로 고리의 형태와 제작기법, 성분을 조사하여 옛 형태를 복원해 보고자 하였다. 의궤 내용에서 고리는 원환(圓環), 국화동(菊花童), 배목(排目) 등 고유의 명칭으로 기록되어 있다. 휴대용 엑스선 형광분석기(portable X-ray fluorescence, Artax, Rontec)로 성분을 분석한 결과, 전통 형식의 고리는 황동, 철, 은-구리합금 등 다양한 금속재로 확인되었다. 구리와 아연이 주성분인 황동은 17점 족자 고리에 사용되었다. 전 윤시달 초상(신2339)의 배목에서는 철을 사용하였으며, 주석-납 합금으로 도금하였다. 이서구 초상(신1065)에서는 고리 전체가 은-구리합금으로 제작되었음을 확인하였다. 광학현미경(Leica, M205A)으로 제작 방법을 조사한 결과 원환은 금속봉을 절단한 뒤 둥글게 휘어 만든 유형과 주조로 제작된 유형으로 확인되었다. 배목은 주조한 합금으로 봉재나 판재를 만들고 다시 단조과정을 거쳐 제작하였고, 배목장식은 금속판재를 잘라 형태를 만든 후 축조와 타출기법 등으로 무늬를 새겨 장식하였다.

• 전기화학회지
• /
• 제16권2호
• /
• pp.85-90
• /
• 2013

현재 리튬이온전지의 음극활물질로 사용하는 흑연은 이론 비용량이 372 mAh/g이고 진밀도는 2.2 g/ml이다. 현재의 상용 리튬이차전지보다 더 높은 에너지밀도를 갖는 전지의 개발을 위해 기존의 흑연을 대체하기 위한 신소재로서 실리콘과 주석 등에 대한 많은 연구가 진행되고 있으며, 아연도 가능성 있는 후보 재료의 하나이다. 아연재료의 이론 비용량과 진밀도는 412 mAh/g과 7.14 g/ml이다. 본 연구에서는 인듐과 니켈을 포함하는 아연계 재료를 합성하고자 하였으며, 균질한 혼합 조성을 얻고자 금속 이온의 sol을 제조하고 gel화하여 소결제조 함으로써 화학적 분산으로 균질한 혼합조성을 가지는 아연계 재료를 제조하고 아연계 음극활물질의 리튬이차전지의 1차 방전 비용량은 910 mAh/g이고 31회, 62회에서는 365 mAh/g, 78 mAh/g의 높은 비용량을 나타내었다. 이와 함께 1차 Ah 효율은 45%였으며, 2회 부터는 정량적인 효율을 나타내었다. 낮은 초기 Ah 효율을 높이고자 리튬 금속을 전극에 부착함으로써 비가역 비용량을 해소 할 수 있었다.

• 청정기술
• /
• 제25권1호
• /
• pp.14-18
• /
• 2019

여러 금속 부품을 가공하기 위하여 사용된 염화제이철 에칭 폐액은 유가금속인 니켈 등을 함유하고 있다. 본 연구에서는 식각공정을 완료한 에칭폐액을 재생하고 부산물로 나온 니켈 함유 폐액으로부터 정제하여 니켈 금속분말로 제조하는 공정을 개발하였다. 부산물인 니켈함유용액을 철 등의 불순물을 침전 제거하기 위하여 수산화나트륨 수용액을 실험을 통하여 가수분해 중화제로서 선정하였고, 이를 통하여 철 등의 불순물을 pH = 4 조건하에 침전 제거하였다. 그 후, 불순물로 잔류하는 망간 및 아연과 같은 금속이온들을 D2EHPA (Di-(2-ethylhexyl) phosphoric acid)를 사용하여 용매추출 하였다. 정제된 염화니켈은 99% 이상의 순도를 가지고 있으며, 그 후 환원제로 하이드라진을 이용하여 99% 이상의 순도와 약 150 nm의 크기를 가지는 니켈 금속분말로 제조하였다. 염화니켈 및 니켈 금속분말의 성분은 EDTA 적정법과 유도결합 플라즈마 방출분광법(inductively coupled plasma optical emission spectrometer, ICP-OES)을 이용하여 확인하였으며, 전계방사 주사전자현미경(field emission scanning electron microscope, FE-SEM), X-선 회절분석기(X-ray diffraction, XRD) 및 투과전자현미경(transmission electron microscopy, TEM)을 통하여 금속분말의 형태, 입자 크기 및 결정성과 같은 물리적 특성을 확인하였다.

• 한국수소및신에너지학회논문집
• /
• 제31권1호
• /
• pp.8-22
• /
• 2020

In this study, we investigated the deactivation characteristics of Ni-Zn-Fe electrodes due to intermittent operation in alkaline water electrolysis. To find suitable method to accelerate deactivation of electrode, the accelerated stress-test (AST) which repeated on/off step was performed with constant current/voltage control. The AST under constant voltage control is suitable to deactivate electrode so it were selected to investigate deactivation of electrode. The AST which repeated on/off step in range of -1.3 V and 0 V was performed and the relationship between oxidation current and electrode deactivation in the off step was investigate. As results, it was confirmed that the nickel and zinc on electrode surface were oxidized due to anodic current which occurred at off step.

• Restorative Dentistry and Endodontics
• /
• 제27권4호
• /
• pp.389-393
• /
• 2002

The marginal integrity of the crown can be broken during endodontic access cavity preparation due to the vibration of burs. Therefore, the purpose of this study was to evaluate the effect of endodontic access cavity preparation on the marginal leakage of full veneer gold crowns. 24 intact molars were mounted in acrylic resin blocks and prepared for crowns by a restorative dentist and crowns were cast with gold alloy. 20 Crowns were cemented with glass ionomer cement and 2 crowns were not cemented for positive control. 200 thermo-cycles from 5$^{\circ}C$ to 5$0^{\circ}C$ with a travel time of 20s were completed. Then samples were randomly divided into 2 experimental groups of 9 each. Endodontic access preparation and zinc-oxide eugenol temporary fillings were done in Group 1. Teeth in Group 2 were not treated. Samples were coated with 2 layers of nail varnish and were immersed in 1% methylene blue dye for 20 hrs. Endodontic access was prepared in 2 samples, which were coated with nail varnish on all surfaces for negative control. After washing in running water gold crowns were cut with a #330 bur. Four buccolingual sections, 2 mm apart, were cut from the central section of each tooth and were examined and scored under the microscope for dye leakage. Score 1: leakage to the cervical 1/3 of the axial wall, Score 2: leakage to the middle 1/3 of the axial wall, Score 3: leakage to the coronal 1/3 of the axial wall, Score 4: leakage to the occlusal surface. The median value for Group 1 is 4 and for Group 2 is 2. The result of this study showed that samples in Group 1 leaked more than those in Group 2. This finding was significant(P<0.001).

• 대한치과보철학회지
• /
• 제22권1호
• /
• pp.95-108
• /
• 1984

Even though the tarnishing and corrosion problems characteristic with dental silver-palladium alloy are not yet fully solved, it is recently widely used because of its low cost. However the effects of major alloying elements on the various properties of this system are not fully understood. The object of this research is to clarify the effects of In and Zn additives on the corrosion and tarnishing resistances and precipitation hardening behavior of this sytem, using electrodynamic polarization, immersion, and Vicker's microhardness test and X-ray diffraction and electron probe micro analysis methods. The obtained results were as follows: I. As indium content is increased, both the corrosion resistance in Cl-solution and microhardness are also increased while the tarnishing resistance is decreased. 2. As Zinc content is increased, the corrosion resistance is decreased, but tarnishing resistance is increased 3. At 70Ag-25Pd-2.5Zn-2.5In composition, the precipitation harding behavior was mot significant. The optimum aging temperature was $450^{\circ}C$ and the time was 2 hrs. The resulting specimen of this work carried 180VHN. 4. Under the heat treatment, the changes in the mechanical property are due to the changes in the shape and composition of dendrite matrix, namely, it is because of the precipitation hardening behavior which has been proved by electron probe micro analysis and optical microscopic finding.

• 대한의용생체공학회:의공학회지
• /
• 제31권3호
• /
• pp.227-233
• /
• 2010

This study analyzed performance according to kick point and stiffness of Soft-$golf^{TM}$ shaft. This research team developed soft-$golf^{TM}$ as a new fusion sports with similar motions with golf and it can be learned safely for all age groups in 2002. The head of Soft-$golf^{TM}$ club is made of zinc alloy and has a mesh or a grid structure, and shaft uses carbon graphite to reduce the total weight of the club. To improve carry distance and to assure consistency of a ball during Soft-$golf^{TM}$ swing, this study manufactured shaft with various kick points (low, middle and high) and stiffness (stiff, regular, lady, morelady) and analyzed a swing motion with characteristics of each shaft presented in a dynamic condition such as a ball's speed, a head's torsion angle and a ball's deviation with ProAnalyst program through a high-speed camera taking pictures using a swing machine robot system(Robo-7). From all of the results, this study determined an appropriate shaft of Soft-$golf^{TM}$.

• The Journal of Advanced Prosthodontics
• /
• 제10권5호
• /
• pp.340-346
• /
• 2018

PURPOSE. In this study, the shear bond strengths (SBS) of luting cements to fixed superstructure metal surfaces under various seating forces were investigated. MATERIALS AND METHODS. Seven different cements [Polycarboxylate (PCC), Glass-Ionomer (GIC), Zinc phospahate (ZPC), Self-adhesive resin (RXU), Resin (C&B), and Temporary cements ((RXT) and (TCS))] were bonded to a total number of 224 square blocks ($5{\times}5{\times}3mm$) made of one pure metal [Titanium (CP Ti) and two metal alloys [Gold-Platinum (Au-Pt) and Cobalt-Chrome (Co-Cr)] under 10 N and 50 N seating forces. SBS values were determined and data were analyzed with 3-way ANOVA. Pairwise comparisons and interactions among groups were analyzed with Tukey's simultaneous confidence intervals. RESULTS. Overall mean scores indicated that Co-Cr showed the highest SBS values ($1.96{\pm}0.4$) (P<.00), while Au-Pt showed the lowest among all metals tested ($1.57{\pm}0.4$) (P<.00). Except for PCC/CP Ti, RXU/CP Ti, and GIC/Au-Pt factor level combinations (P<.00), the cements tested under 10 N seating force showed no significantly higher SBS values when compared to the values of those tested under 50 N seating force (P>.05). The PCC cement showed the highest mean SBS score ($3.59{\pm}0.07$) among all cements tested (P<.00), while the resin-based temporary luting cement RXT showed the lowest ($0.39{\pm}0.07$) (P<.00). CONCLUSION. Polycarboxylate cement provides reliable bonding performance to metal surfaces. Resin-based temporary luting cements can be used when retrievability is needed. GIC is not suitable for permanent cementation of fixed dental prostheses consisting of CP Ti or Au-Pt substructures.