• Journal of the Korean Ceramic Society
• /
• v.56 no.5
• /
• pp.474-482
• /
• 2019

Chromium-doped zinc ferrite nanoparticles with the general formula Cr_yZnFe_2-yO₄ (y = 0, 0.025, 0.05, 0.075, and 0.1) were synthesized by a surfactant-assisted chemical co-precipitation route using metal nitrate salt precursors. The phase purity and structural parameters were determined by powder X-ray diffraction. The concentration of Cr³⁺ doped into ZnFe₂O₄ (ZF) noticeably affected the crystallite size, which was in the range of 22 nm to 36 nm, and all samples showed a single cubic spinel structure without any secondary phase or impurities. The lattice parameter, X-ray density, and skeletal density increased with an increase in the Cr-doping concentration; on the other hand, a decreasing trend was observed for the particle size and porosity. The influence of Cr³⁺ substitution on ZF magnetic properties were studied under an applied field of 15 kOe. The overall results revealed that the incorporation of a small amount of Cr dopant changed the structural, electrical, and magnetic properties of ZF.

• KSBB Journal
• /
• v.5 no.2
• /
• pp.183-189
• /
• 1990

An efficient method has been developed for the purification of urokinase from 1, 000 liter batches of human urine. The procedure involved precipitation of urokinase with 2mM zinc chloride, resuspension of the precipitate with 0.1M EDTA/0.5M Glycine solution, and CM-Toyopearl and benzamidine-Sepharose column chromatography. The purified urokinase was fully active and possessed a specific activity of 1.07$\times$105IU/mg. The recoveries ranged from 42 to 65% in several preparations(mean value was 51%). And the urokinase purified by this process consisted of about 13% of single chain urokinase (pro-urokinase) as evaluated by SDS-polyacrylamide gel electrophoresis in reducing condition and by S-2444 amldolytic activity under plasmin treatment.

• Corrosion Science and Technology
• /
• v.18 no.3
• /
• pp.86-91
• /
• 2019

Generally, atmospheric corrosion is the electrochemical degradation of metal that can be caused by various corrosion factors of atmospheric components and weather, as well as air pollutants. Specifically, moisture and particles of sea salt and sulfur dioxide are major factors in atmospheric corrosion. Using galvanized steel is one of the most efficient ways to protect iron from corrosion by zinc plating on the surface of the iron. Galvanized steel is widely used in automobiles, building structures, roofing, and other industrial structures due to their high corrosion resistance relative to iron. The atmospheric corrosion of galvanized steel shows complex corrosion behavior, depending on the plating, coating thickness, atmospheric environment, and air pollutants. In addition, corrosion products are produced in different types of environments. The lifespans of galvanized steels may vary depending on the use environment. Therefore, this study investigated the corrosion behavior of galvannealed steel under atmospheric corrosion in two locations in Korea, and the lifespan prediction of galvannealed steel in rural and coastal environments was conducted by means of the potentiostatic dissolution test and the chemical cyclic corrosion test.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.4
• /
• pp.405-412
• /
• 2012

In the past, a very popular way to reduce the corrosion rate of zinc was the use of chemical conversion layers based on $Cr^{+6}$. However, the use of chromium salts is now restricted because of environmental protection legislation. Previous research investigated the optimum corrosion resistance of galvanized steel treated with an organic/inorganic solution containing Si. The result showed that the optimum corrosion resistance occurred by heat treatment of $190^{\circ}C$ in 5 min. In this study, one organic and three hybrid organic/inorganic coating solutions were applied to cold-rolled (CR) carbon steel. The coatings were then evaluated for corrosion resistance under a salt spray test. The coating solutions examined in this study consisted of urethane-only, urethane-Si, urethane-Si-Ti, and urethane-Si-Ti-epoxy. The results of the 7 h salt spray test showed that the urethane-Si-Ti and urethane-Si-Ti-epoxy coating solutions had superior corrosion resistance on CR steel.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.373-378
• /
• 2019

In the marine area, the salt concentration in the soil increases, and the inland heavy metal pollution increases the damage of plants. In the inland industrial development area, researches on the genetic resources of plants together with the heavy metal accumulation of Co, Ni, Zn, and so on are required. Both of these problems have caused scientists to work hard to find plants that are likely to cause stress in plant roots. In this study, seeds of Arabis stelleri var. japonica collected near the shore were used for germination. The growth and development and tolerance of both Arabis and Arabidopsis seeds were investigated under laboratory culture conditions. As a result, Arabis showed resistance about 3 times in 250 mM nickle and cobalt, and more than 4 times in 1 mM zinc when compared to Arabidopsis. The tolerance of Arabis to Na salts increased by 20% or more at 50 mM concentration and Arabis was resistant to heavy metals and salt concentration. The accumulation of Na ions in the body was measured as a preparation for studying the intracellular mechanism. As a result, it showed a further decrease in resistance to ground water roots. It is considered that the activity of the exporting gene is important rather than the mechanism of accumulation.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.7
• /
• pp.1319-1330
• /
• 2000

Activated carbons prepared by chemical activation of organic waste sludges with $ZnCl_2$ and $K_2S$ have been studied in terms of their pore development and adsorptivity. Pore development of the carbons prepared from organic waste sludges was characterized by the nitrogen adsorption at 77K. The $ZnCl_2$-activated carbon produced by chemical activation with zinc chloride exhibited type I isotherm characteristics according to the BDDT classification, suggesting the presence of micropores formed by activation process. The isotherms of the commercial powdered activated carbon and $K_2S$-activated carbon reveal a hysteresis similar to that of type IV in BDDT classification, indicating the formation of mesopores. This result implies that the major pores of $K_2S$-activated carbon are composed of meso and micropores, and a macropores are minor. The adsorptive capacities of metal on the $K_2S$-activated carbon prepared from organic waste sludges were found to be superior to those on a commercial granular activated carbon. The Langmuir and Freundlich isotherms yield a fairly good fit to the adsorption data, indicating a monolayer adsorption of metals onto $K_2S$-activated carbon. The adsorptive capacity of the $K_2S$-activated carbon was superior to $ZnCl_2$-activated carbon for $PO_4$-P, and vice versa for $NO_3$-N. From the results of the studies reported here, it can be concluded that activated carbons with adsorptivity superior to commercial granular activated carbons can be produced from organic waste sludge using a two-step carbonization/activation procedure with zinc chloride or potassium sulfide as the activating agents.

• Journal of Plant Biotechnology
• /
• v.43 no.2
• /
• pp.231-239
• /
• 2016

To study the transcript levels of epigenetically regulated genes in tobacco, we have developed a transgenic line OX1 overexpressing NtROS2a gene encoding cytosine DNA demethylation and a RNAi plant line RNAi13. It has been reported that salt- and $H_2O_2$-stress tolerance of these transgenic lines are enhanced with various phenotypic characters (Lee et al. 2015). In this paper, we conducted microarray analysis with Agilent Tobacco 4 x 44K oligo chip by using overexpression line OX1, RNAi plant line RNAi 13, and wild type plant WT. Differentially expressed genes (DEGs) related to metabolism, nutrient supply, and various stressed were up-regulated by approximately 1.5- to 80- fold. DEGs related to co-enzymes, metabolism, and methylation functional genes were down-regulated by approximately 0.03- to 0.7- fold. qRT-PCR analysis showed that the transcript levels of several candidate genes in OX1 and RNAi lines were significantly (p < 0.05) higher than those in WT, such as genes encoding KH domain-containing protein, MADS-box protein, and Zinc phosphodiesterase ELAC protein. On the other hand, several genes such as those encoding pentatricopeptide (PPR) repeat-containing protein, histone deacetylase HDAC3 protein, and protein kinase were decreased by approximately 0.4- to 1.0- fold. This study showed that NtROS2a gene encoding DNA glycosylase related to demethylation could regulate adaptive response of tobacco at transcriptional level.

• Membrane and Water Treatment
• /
• v.8 no.3
• /
• pp.225-244
• /
• 2017

A novel thin-film nanocomposite (TFN) reverse osmosis (RO)/non-woven fabric (NWF) membrane was prepared by adding zinc oxide (ZnO) nanospheres ($30{\pm}10nm$) during the interfacial polymerization process of m-phenylenediamine (MPD) and trimesoyl chloride (TMC) on self-made polysulfone (PSF) membrane/polyester (PET) non-woven fabric support. The improved performance of TFN RO membrane was verified in terms of water contact angle (WCA), water flux, salt rejection, antifouling properties and chlorine resistance. The results showed that the WCA value of TFN RO surface had a continuous decrease with the increasing of ZnO content in MPD aqueous solution. The water flux of composite TFN RO membranes acquired a remarkable increase with a stable high solute rejection (94.5 %) in $1g{\cdot}L^{-1}$ NaCl aqueous solution under the optimized addition amount of ZnO (1 wt%). The continuous testing of membrane separation performance after the immersion in sodium hypochlorite solution indicated that the introduction of ZnO nanospheres also dramatically enhanced the antifouling properties and the chlorine resistance of composite RO membranes.

• Korean journal of food and cookery science
• /
• v.20 no.6 s.84
• /
• pp.614-618
• /
• 2004

This study was performed to investigate the nutritional components of yanggeng prepared with different amounts of pumpkin. Three yanggeng products were made, consisting of 87 (sample A), 90 (sample B) and $93\%$ (sample C) pumpkin paste, with the addition of agar, sugar, corn syrup and salt. The amino acids, vitamin E, sugars and mineral contents of the yanggeng were also examined. With regard to the amino acids content of the pumpkin yanggeng those of glutamic and aspartic acid were the highest in all three products. The vitamin E concentration was significantly higher in sample C than those in samples A and B. The glucose and galactose contents were higher in sample C than in samples A and B, whereas the fructose and lactose contents were higher in sample A than in samples A and B. The calcium, magnesium, potassium and sodium contents were higher in sample C than in the other two samples, whereas the zinc and manganese contents were higher in sample A than the other two samples. The potassium content of the pumpkin yanggeng was the highest of the tested minerals.

• Corrosion Science and Technology
• /
• v.14 no.5
• /
• pp.213-217
• /
• 2015

Recently, household electronic industries require environmentally-friendly and highly functional steels in order to enhance the quality of human life. Customers especially require both excellent corrosion and abrasion resistant anti-fingerprint steels for digital TV panels. Thus POSCO has developed new functional electro-galvanized steels, which have double coated layers with organic-inorganic composites on the zinc surface of the steel for usage as the bottom chassis panel of TVs. The inorganic solution for the bottom layer consists of inorganic phosphate, magnesium, and zirconium compounds with a small amount of epoxy binder, and affords both improved adhesion properties by chemical conversion reactions and corrosion resistance due to a self-healing effect. The composite solution for the top layer was prepared by fine dispersion of organic-inorganic ingredients that consist of a urethane modified polyacrylate polymer, hardener, silica sol and a titanium complex inhibitor in aqueous media. Both composite solutions were coated on the steel surface by using a roll coater and then cured through an induction furnace in the electro-galvanizing line. New anti-fingerprint steel was evaluated for quality performance through such procedures as the salt spray test for corrosion resistance, tribological test for abrasion resistance, and conductivity test for surface electric conductance regarding to both types of polymer resin and coating weight of composite solution. New composite coated anti-fingerprint steels afford both better corrosion resistance and abrasion properties compared to conventional anti-fingerprint steel that mainly consists of acrylate polymers. Detailed discussions of both composite solutions and experimental results suggest that urethane modifications of acrylate polymers of composite solutions play a key role in enhanced quality performances.