• International Journal of Highway Engineering
• /
• v.15 no.6
• /
• pp.135-141
• /
• 2013

PURPOSES : The lack of details of design guideline for zig-zag shaped section approaching central bus stop leads an traffic accident proneness. So, this study analysed the geometric elements of central bus stop area in terms of vehicle dynamics and suggested design alternatives. METHODS : The study analysed a dynamic behaviour of bus moving in and out of zig-zag shaped section using Auto-Turn under scenarios. Based upon dynamic analysis, the study found out the width of overtaking lane is the most influential factor for a safe moving at zig-zag alignment. RESULTS : The width of overtaking lane at design speed of 40, 50, and 60 km/h respectively was suggested given taper ratio of 1 to 10 required for Bus Rapid Transit (BRT), and the lane width is not wider than 4.0m which possibly makes two vehicles using the same lane. Also, the width of overtaking lane which mitigates the taper ratio was suggested with the same restriction about the maximum lane width. CONCLUSIONS : The results of the study can be used to prepare a design guideline on zig-zag shaped alignment of central bus exclusive lanes. The more stable moving is expected by applying the design alternatives suggested, therefore the lower rate of traffic crashes at the vicinity of central bus stops.

• Journal of Korea Multimedia Society
• /
• v.11 no.6
• /
• pp.835-844
• /
• 2008

ZigBee devices are limited in resources especially on power and computational capacity but also require real-time operation at MAC layer. Therefore, it is important to take those requirement into consideration of system software design. In this paper, we proposed a compact system software design to support simultaneously ZigBee and IEEE802.15.4. The design strictly respects the resource and real-time constraints while being optimized for specific functions of both Zigbee and IEEE802.15.4. Various evaluations are done to show significant metrics of our design.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.7
• /
• pp.720-729
• /
• 2011

The demand for wireless technology in home automation systems has recently been increasing due to several advantages such as installation cost reduction, easy placement, easy extension, aesthetic benefits, and mobile device connectivity. Among the many wireless technologies, ZigBee is one of the most useful for home automation; a wireless home networking system can be configured using ZigBee alone. Compatibility with conventional home networking systems that are based on wired media, however, is not supported. KNX is a mature protocol for wired media that is recognized as an international standard. This paper proposes a KNX-ZigBee gateway to interface between KNX and ZigBee systems and thereby enable integration of wired and wireless home automation systems.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.05a
• /
• pp.166-168
• /
• 2013

광산의 작업 환경은 매우 위험하기 때문에 안전사고가 빈번히 발생하고 있으며, 이는 광부의 개인 안전을 크게 위협하고 있다. 광부에게 광산에서 안전사고가 생길 시에는 광부의 위치가 제일 먼저 파악되어야 하고 이는 가장 중요한 정보 중 하나이다. 따라서 본 논문에서는 ZigBee를 이용하여 무선 센서 네트워크를 구성하고, 안전사고가 빈번히 발생하는 광산에서의 광부 위치 관리 시스템을 설계하였다. 이를 위해 본 논문에서는 광부의 이동범위에 설치된 ZigBee Reader와 광부의 신체 및 소지품에 부착된 ZigBee Tag와 ZigBee 무선 센서 네트워크의 정보를 관리하는 ZigBee 서버및 데이터를 기록할 DB와 지상 관리자의 요구를 받아 이 정보를 지상 관리자에게 알려주는 위치 관리 시스템을 설계하였다.

• Convergence Security Journal
• /
• v.22 no.1
• /
• pp.81-92
• /
• 2022

The rapidly growing IoT market is expanding not only in general households but also in smart homes and smart cities. Among the major protocols used in IoT, ZigBee accounts for more than 90% of the smart home's door lock market and is mainly used in miniaturized sensor devices, so the safety of the protocol is very important. However, the device using Zig Bee is not satisfied with the omnidirectional safety because it uses a fixed key during the authentication process that connects to the network, and it has not been resolved in the recently developed ZigBee 3.0. This paper proposes a design method that provides omnidirectional safety to the ZigBee authentication protocol and can be quickly applied to existing protocols. The proposed improved ZigBee authentication protocol analyzed and applied the recently developed OWE protocol to apply ECDH, which has low computational volume and provides omnidirectional safety in IoT. Based on this, it provides the safety of the ZigBee authentication protocol, and it is expected that it will be able to provide user convenience as it does not require a separate certificate or password input.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.49-52
• /
• 2011

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.416-421
• /
• 2007

ZigBee is becoming a promising communication protocol for wireless sensor networks based on low-power consumption. In case of a ZigBee network requesting continuous transmission of sensed data, the required bandwidth can be overwhelm the maximum transmission rate of 150Kbps. However, the ZigBee router which delivers data from source node to destination node can transmit data at most in a half of maximum rate because the router can not send and receive the data simultaneously. In this paper, we propose and implement a dual-channel router which can send and receive data simultaneously. Also, we propose a centralized channel allocation algorithm to allocate different channels to each module. The experiment result by the proposed dual-channel router shows a maximum throughput of 150Kbps as large as twice of normal single-channel router.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.5
• /
• pp.335-340
• /
• 2013

This paper has designed and realized educational ZigBee equipment befitting to the USN environment. In addition, this study has enabled users to exercise operation process for software technology education and to propose software design methods in the process in the USN environment through practice equipment for ZigBee education. As for the development environment of system, Atmega128 process of Atmel is used for CPU; AVR compiler for the debugging environment; C language for firmware development language; and C++ for application program. The system operation process is initiated by coordinator's sensing information reading order from the hyper terminal through a server through the Internet or directly connected; and then delivering it to a terminating device by using ZigBee technology. The terminating device delivers various sensing information to the coordinator which delivers it to a server through the Internet or to a HYPER terminal directly connected to the coordinator. As for the educational course, it is about practices on such ZigBee operation process and relevant programing skills. Regarding it, the communication between coordinator and terminating device is designed by utilizing physical layer of ZigBee protocol, MAC layer and network layer while the communication between server and coordinator is designed by proposing an independent protocol on TCP/IP socket and the protocol processing procedure during sensing data delivery is verified by interpretation.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.1 no.2
• /
• pp.104-112
• /
• 2006

ZigBee is the emerging industrial standard for ad hoc networks based on IEEE 802.15.4. It is used for low data rate and low power wireless network applications. Expected applications of ZigBee include wireless sensor networks for remote monitoring, home control, and industrial automation. Since one of the most important design goals of ZigBee is to reduce the installation and running costs, the ZigBee stack is embedded in the cheap and small micro-controller unit. The hierarchical routing algorithm is used for ZigBee end devices which have very limited resources. Using the block addressing scheme, end devices can send data to the destination without a routing table. However, hierarchical routing has the problem that the packets follow the tree hierarchy to the destination even if the destination is located nearby. In this paper, we propose a scheme to improve the hierarchical routing algorithm in ZigBee networks by employing the neighbor table that is originally used together with the routing table. We suggest selecting the neighbor node that has the minimum remaining hops to the destination as the next hop node. Simulation result shows that the proposed scheme saves more than 30% of the hop counts compared with the original hierarchical routing.

• Journal of Information Technology Services
• /
• v.9 no.2
• /
• pp.151-161
• /
• 2010

Recently, as the era of ubiquitous has arrived, an infrastructure for the short-distance wireless communication has been extended socially, and thus a variety of services are being proposed. The Multimedia Contents Delivery System using the ZigBee, in particular, has an important stance in enlargement of a variety of services in the aspect of individual-oriented service support though Wireless Personal Area Network (WPAN). Nonetheless, the ZigBee, or the IEEE 802.15.4 Standard, has many restrictions on the Multimedia Contents Delivery System due to the low data transport rate. In order to improve the ZigBee which presents a limit on the transport rate at the IEEE 802.15.4 Standard, this thesis has designed the burst mode which is a method of transmitting a certain amount of data in block units at a high speed without any stoppage until the completion of the transmission. Also, to provide a Multimedia Contents Delivery Service with an application of the normal data transmission mode, it improved the transmission performance of the ZigBee. In addition, for the Multimedia Contents Delivery Service under the ubiquitous environment, it designed and implemented a broadcasting Multimedia Contents Delivery System based on the ZigBee to conduct a comparative analysis on the data transmission performance according to the transmission method.