• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.226-228
• /
• 2006

This paper presents the two lossless auxiliary inducors-assisted voltage source type half bridge(single ended push pull:SEPP) series resonant high frequency inverter for induction heated fixing roller in copy and printing machines. The simple high-frequency inverter treated here can completely achieve stable zero current soft switching (ZCS) commutation forwide its output power regulation ranges and load variations under constant high frequency pulse density modulation (PDM) scheme. Its transient and steady state operatprinciple is originally described and discussed for a constant high-frequency PDM control strategy under a stable ZCS operation commutation, together with its output effective power regulation charactertics-based on the high frequency PDM strategy. The experimenoperating performances of this voltage source SEPP ZCS-PDM series resonant high frequency inverter using IGBTs are illustrated as compared with computer simulation results and experimenones. Its power losses analysis and actual efficiency are evaluated and discussed on the basis of simulation and experimental results. The feasible effectiveness of this high frequency inverter appliimplemented here is proved from the practical point of view.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.183-185
• /
• 1994

A new method for determination of electric parameter of cell membranes is proposed. Two circular electrodes is designed to have repulsive force. From the potential energy analysis, stable points where a cell is levitated between electrodes exist and move as frequency or voltage change. The levitated cell in the stable point fall freely when DEP force is zero. The DEP force is dependent on the frequency and the force is zero at the critical frequency. The critical frequency is determined by measuring the difference between the time taken at zero-applied voltage and the time taken at the frequency and the voltage. For example, the critical frequency and stable points of N.crassa slime cell is numerically evaluated. In the exeriment, polystyrene in water is levitated at the stable point. We show that the stable point move as the applied voltage is changed.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2104-2106
• /
• 2000

For general laser power supply. output of the secondary of the power transformer is connected to the rectifier and filter capacitor. The output of a rectifier is applied to a switching element in the secondary of the transformer. So, power supply is complicated and the loss of switching is considerably. In addition, according to increasing pulse repetition. charged energy of energy storage capacitor is not transferred sufficiently to flashlamp. and laser output efficiency decreases. In this paper, to improve laser efficiency. we designed and fabricated the power supply in which the SCR was turned on in zero point by the method of ZCC(zero crossing control)in result, laser output efficiency in creased by about 3.5% other than conventional supply. when a repetition rate was increased by 10[pps]. In 60[pps]. efficiency was about 20%.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.485-487
• /
• 2014

Nitrogen이 도핑된 graphene에서의 hydrogen evolution에 대한 촉매효과에 대해서 연구를 진행하였다. Reaction free energy를 계산하기 위해서 많은 N-doped graphene 모델을 계산하였으며 pH 조건, silicon cathode의 영향 그리고 zero point energy의 효과를 고려하였다. Volcano plot에 의하면 "pyrol" like model과 N-doped armchair graphene model (aGNR-N1)이 좋은 촉매효과를 가짐을 밝혔다. 또한 free energy diagram을 통하여 "pyrol"과 "aGNR-N1"이 좋은 active site가 될 수 있음을 확인하였고 pH가 증가함에 따라 $H^+$의 에너지가 증가함에 따라 촉매 효과가 줄어듬을 확인하였다.

• Speech Sciences
• /
• v.3
• /
• pp.156-166
• /
• 1998

In this paper, I would like to propose a dividing method by estimating the inflection points and the average magnitude energy in speech signals. The method proposed in this paper gave not only a satisfactory solution for the problems on dividing method by zero-crossing rate, but could estimate the feature of the transient period after dividing the starting point and transient period in speech signals before steady state. In the results of the experiment carried out with monosyllabic speech, it was found that even through speech samples indicated in D.C. level, the staring and ending point of the speech signals were exactly divided by the method. In addition to the results, I could compare with the features, such as the length of transient period, the short term energy, the frequency characteristics, in each speech signal.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.211-214
• /
• 2001

For general laser power supply, the secondary of the power transformer is connected to the rectifier and filter capacitor. The output of a rectifier is connected to a switching element in the secondary of the transformer. So the Dower supply is complicated and the loss of switching is considerably. In addition, according to increasing pulse repetition, charged energy of energy-storage capacitor is not transferred sufficiently to flashlamp, and laser output efficiency decreases. In this raper, to improve laser efficiency, we designed and fabricated the power supply in which the SCR was turned on in zero point by the methods of ZCC(zero crossing control), PFN(pulse forming network) in result, laser output efficiency increased by hte 4% other than conventional supply, when a repetition rate was increased by the 10[pps], In 20(pps), efficiency was increased by about 8%

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1985.10a
• /
• pp.75-78
• /
• 1985

본 연구는 시간 영역의 parament를 이용하여 한국어 숫자음(영, 일, 이, 삼, 사, 오, 육, 칠, 팔, 구)을 인식했다. 입력 음성 신호 X(n)의 Beginning Point와 Ending point를 ZCR(Zero-crossing Rate), Magnitude, Energy, Autocorrelation을 이용 Beginning point와 Ending point를 구하고 자음부의 인식은 위 계수들을 이용하여 행했다. 또, 유성음 부분에서는 PARCOR(Partial Autocorrelation), LPC(Linear Predictive Coding)를 이용 모음부와 유성자음을 인식하여 모음을 6개 부류(ㅏ, ㅑ, ㅗ, ㅜ, ㅠ, ㅣ)로 구분 인식했다. 이 방법에 의하면 입력 음성 신호 X(n)의 B.P(Beginning Point)와 E.P(Ending Point)를 쉽게 추출 가능하며 또한 각 Parameter를 이용하여 94.4%의 인식율을 얻었다.

• Journal of the Korean Chemical Society
• /
• v.55 no.6
• /
• pp.905-911
• /
• 2011

The possible minimum structures of $C_{60}(CH_2)_nOH$ (n=0~2) and $C_{60}(OH)_2$have been optimized using density functional theory (DFT) with the 6-311G (d,f) basis set. The harmonic vibrational frequencies and IR intensities are also determined to confirm that all the optimized geometries are true minima. Also zero-point vibrational energies (ZPVE) have been considered to predict the binding energies. The predicted binding energy of $C_{60}CH_2OH$ is about 10 kcal/mol more stable than the binding energy of $C_{60}OH$.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.5
• /
• pp.378-385
• /
• 2007

AC PDP has disadvantages that power consumption and sustain voltage are high. An energy recovery circuit for AC PDPs with reduced sustain voltage was proposed to solve these disadvantages. However, the circuit has disadvantage that the switching elements are performed hard switching at the start point of discharge and sustaining region. The reason is that the panel voltage is lower than sustain voltage at that point. In this paper, we propose the improved driving method that switching devices are operated with ZVS by using CIM(Current Infection Method) also at that point. CIM region is designed by theoretical circuit analysis. Finally, the validity of the proposed driving method is verified by the simulations and experimentation.

• Journal of Biomedical Engineering Research
• /
• v.22 no.3
• /
• pp.241-247
• /
• 2001

ABR(auditory brainstem response) is one of the audiometry which measures objective hearing threshold level by acquiring electric evoked potentials emanated from auditory nerve system responding to an auditory stimulation. However, the obtained potentials which are largely interfered by power line noise, have extremely low SNR, thus ensemble average algorithm is generally used. The purpose of this study was to investigate the effect of iteration number in ensemble average on the reduction of the power line noise. The power line noise was modeled to be a 60 Hz sinusoidal signal and the energy of the modeled signal was calculated when it was averaged. It was verified by simulation that the energy had the periodic zero points for each stimulation rate, and 60 Hz signal induced by the power line was applied to the developed ABR system to confirm that the period of zero energy point was the same with that of the simulation. By the properly selected iteration number, power line noise could be reduced and more reliable ABR could be acquired.