• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.895-901
• /
• 1999

The acid characteristics of ${\beta}$-zeolites was modified by the different calcination conditions in order to remove template and the post-treatments such as ammonium ion exchange and HCl treatment. Alkylation of benzene with propene and isopropanol was carried out over the catalysts to investigate the effect of acid characteristics on the selectivity to cumene in this reaction. The $Br{\ddot{o}}nsted$ acidity(IR $3610cm^{-1}$ band) of ${\beta}$-zeolite was significantly reduced by a deep bed calcination compared to that of ${\beta}$-zeolite calcined in a shallow bed. Moreover, extraframework aluminum species which did not show acidity were produced by the framework dealumination on the deep bed calcined ${\beta}$-zeolite. $Br{\ddot{o}}nsted$ acidity of deep bed calcined ${\beta}$-zeolite was significantly recovered by ammonium ion exchange, however, it was partially recovered by a weak HCl treatment. It was found that the framework aluminum as well as the extraframework aluminum were extracted by a strong HCl treatment. The selectivity to cumene was shown to be about 95% on the shallow bed calcined ${\beta}$-zeolite, however, it decreased to 90% on the deep bed calcined one. The post-treatment such as ammonium exchange and weak HCl treatment enhanced the selectivity to cumene up to 93% by the partial recovery of $Br{\ddot{o}}nsted$ acidity. Propene was proved to be a good alkylating agent for the selectivity to cumene compared to isopropanol.

• Membrane Journal
• /
• v.19 no.3
• /
• pp.189-193
• /
• 2009

The present work was attempted to improve the performance for the removal of water from ethanol/water mixtures through the ion-exchanged zeolite membrane in which $Na^{+}$ ion was substituted to either $K^{+}$ or $Ca^{2+}$ ion. The membranes were ion-exchanged with 0.5 mole/L aqueous solution of either KCl or $CaCl_2$ at $80^{\circ}C$ for 4 hrs. In case of the ion-exchanged membrane in which $Na^{+}$ ion was substituted to $K^{+}$ ion, the total flux was decreased from $900\;g/m^2{\cdot}hr{\sim}2,500\;g/m^2{\cdot}hr$ to $600\;g/m^2{\cdot}hr{\sim}2,000\;g/m^2{\cdot}hr$ and the separation factor was increased from $600{\sim}2,200$ to $850{\sim}2,500$ compared to the NaA type zeolite membrane. And in case of the ion-exchanged membrane in which $Na^{+}$ ion is substituted to $Ca^{2+}$ ion, both the total flux and selectivity of water showed the similar tendency compared to the NaA type zeolite membrane. It is thought that the improved separation would be possible if the pore size of the zeolite membrane is controlled by the ion exchange.

• Membrane Journal
• /
• v.29 no.5
• /
• pp.263-275
• /
• 2019

In the present study, thickness of MOR zeolite membranes was controlled by changing seed size, seeding amount, and aging time of hydrothermal solution, and then effect of membrane thickness on pervaporative ethanol dehydration for 90 wt.% ethanol-water mixture was investigated. First, nanosize MOR zeolite seeds with a diameter of 20 to 30 nm was successfully prepared by planetary milling a laboratory synthesized MOR zeolites and the coating amount was controlled by seed concentration and infiltration volume of coating solution during vacuum-assisted seeding. As seeding amount decreased, membrane thickness was reduced up to around $4{\mu}m$. The MOR zeolite membrane having a thickness of $4{\mu}m$ showed a water/ethanol separation factor of 760 and water flux of $1.0kg/m^2h$. The excellent water flux was due to the reduced membrane thickness which was derived from the nanosize seed. Therefore, it could be concluded that membrane thickness control by using nanosize seed can be a crucial factor to improve pervaporative water flux of MOR zeolite membrane.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1301-1304
• /
• 2010

The Indium modified mesoporous zeolite AlMCM-41 were synthesized by hydrothermal method and characterized by powder X-ray diffraction (XRD), fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS) techniques. The Knoevenagel condensation of aldehyde with malononitrile or ethyl cyanoacetate was carried out at reflux condition in ethanol by using heterogeneous In/AlMCM-41 catalyst. This method is fast, efficient, easy work-up and eco-friendly to afford the corresponding Knoevenagel adducts. The catalyst was recovered and reused for several cycles with consistent activity.

• Korean Journal of Materials Research
• /
• v.26 no.12
• /
• pp.726-732
• /
• 2016

In this study, we used activated carbon(AC) as a carbon source, along with zeolite, to prepare spherical carbons using sucrose, starch and phenolic resin(PR) as binder material. The physicochemical characteristics of the three samples(AZ4P, AZ6P and AZ8P) were examined by BET, XRD, SEM, EDX, $H_2S/NH_3$ gas adsorption, compressive strength and ignition test techniques. Through comparative analysis of the compressive strength and ignition test results the AZ8P sample was found to have the best hardness and the highest temperature resistance capacity. After activation, the AZ8P sample had the best $H_2S$ adsorption capacity, and AZ6P was the most suitable for the adsorption of ammonia.

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2005

Electrorheological (ER) fluids, typically composed of particles having higher dielectric constant or electric conductivity than that of suspending fluids with a low viscosity, undergo dramatic, reversible changes when exposed to an external electric field. Among various electroactive materials, we put our efforts on inorganic materials including zeolite, MCM-41, MCM-41/polyaniline composite and SBA-15/polyaniline composites. Their preparation and ER characteristics are introduced.

• International Journal of Automotive Technology
• /
• v.5 no.1
• /
• pp.1-7
• /
• 2004

In line with the Super Ultra Low Emission Vehicle (SULEV) regulation, the main idea in this study has been focused on the utilization of hydrocarbon adsorber (HCA) to adsorb the excess hydrocarbons emitted during a period of engine cold-start, As main recipes of HCA materials, many types of zeolite as well as the combination of alumina and precious metals were used, Representative physico-chemical factors of zeolite such as acidic and hydrophobic properties were characterized. The optimum recipe of HCA materials was also determined. Among the acid properties of zeolites, the Si/Al ratio was found to be the most important factor to get higher hydrocarbon adsorption capacity.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.1
• /
• pp.38-44
• /
• 2008

Contiuous c-oriented zeolite MFI films $(<35{\mu}m)$ were prepared by hydrothermal secondary growth of silicalite-1 seed crystal in the surface of alumina porous substrate and silicon substrate. The supported films were characterized with scanning electron microscopy and X-ray diffraction. Effect of substrate surface roughness were investigated and a mechanism for c-oriented film formation and characteristic dom-like defects formation which is observed after seeding growth was discussed. The roughness of substrate plays an important role.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05a
• /
• pp.33-38
• /
• 2004

Molecular modeling of gas permeation through zeolite membranes with/without intercrystalline region was carried out. Molecular dynamics (MD) and Monte Carlo (MC) simulations were performed to estimate the diffusion coefficient and adsorption parameters respectively, and our proposed combined method of molecular simulation techniques with a permeation theory (CMP) was used to estimate gas permeability. The calculated permeability of gases (Ar, He, Ne, $N_2$, $0_2$, $CH_4$) at 301 K for the single crystal membrane model was about one order of magnitude larger than the experiential values, although the dependence on the molecular weight of the permeating species agreed with experiments. On the other hand, the estimated permeability using the diffusivity and adsorption parameters of the intercrystalline region model was in good agreement with the experiments. The consistency between experiments and the estimated values means the importance of considering the intercrystalline region and the validity of CMP method to predict the performance of zeolite membranes.

• Membrane Journal
• /
• v.17 no.1
• /
• pp.61-66
• /
• 2007

A zeolite membrane shows better thermal, mechanical and chemical stabilities than a polymer membrane. Water was separated from iso-propyl alcohol (IPA)/water mixtures by pervaporation using the NaY zeolite membrane synthesized in the laboratory. The effects of a mole fraction of IPA in the feed solution and an operating temperature were studied on the permeation flux behavior and the separation factor of water with respect to IPA. As a mole fraction of IPA increased, the water flux as well as the separation factor decreased. As the experimental temperature increased, the water permeation flux increased while the separation factor decreased. For IPA/water binary mixtures, the water flukes through the NaY zeolite membrane were observed to be $1.9{\times}10^2{\sim}3.5{\times}10^3\;g/m^2{\cdot}hr$ and the separation factors were found to be $7.0{\times}10^2{\sim}2.0{\times}10^4$.