• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.101-101
• /
• 2010

ZnO shows a direct band gap of 3.37eV, large exciton binding energy (~60 meV), high oxidation ability, high sensitivity to many gases, and low cost, and it has been used in various applications such as transparent electrodes, light emitting diodes (LEDs), gas sensors and photocatalysts. Among these applications ZnO as photocatalyst has considerably attracted attention over the past few years because of its high activities in removing organic contaminants generated from industrial activities. In this research, ZnO nanoparticles were synthesized by spray-pyrolysis method using the zinc acetate dihydrate as starting material at synthesis temperature of $900^{\circ}C$ with concentration varied from 0.01 to 1.0M. The physical and chemical properties of the synthesized ZnO nanoparticles were examined by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Fourier Transformation Infrared (FT-IR), and UV-vis spectroscopy. The Miller indices of XRD patterns indicate that the synthesized ZnO nanoparticles showed a hexagonal wurtzite structure. With increased precursor concentration, a primary, secondary particle sizes of ZnO nanoparticles increased by 0.8 to $1.5{\mu}m$ and 15 to 35nm, and their crystallinity was improved. Methyleneblue (MB) solution ($1{\mu}M$) as a test comtaminant was prepared for evaluating the photocatalytic activities of ZnO nanoparticles synthesized in different precursor concentration. The results show that the photocatalytic efficiency of ZnO nanoparticles was gradually enhanced by increased precursor concentration.

• Restorative Dentistry and Endodontics
• /
• v.39 no.4
• /
• pp.265-269
• /
• 2014

Objectives: To evaluate the effect of different ultrasonic tip designs on intraradicular post removal. Materials and Methods: The crowns of forty human canine teeth were removed, and after biomechanical preparation and filling, the roots were embedded in acrylic resin blocks. The post spaces were made, and root canal molding was performed with self-cured acrylic resin. After casting (Cu-Al), the posts were cemented with zinc phosphate cement. The specimens were randomly separated into 4 groups (n = 10), as follows: G1 - no ultrasonic vibration (control); G2 - ultrasonic vibration using an elongated cylindrical-shaped and active rounded tip; G3 - ultrasonic vibration with a flattened convex and linear active tip; G4 - ultrasonic vibration with active semicircular tapered tip. Ultrasonic vibration was applied for 15 seconds on each post surface and tensile test was performed in a Universal Testing Machine (Instron 4444 - 1 mm/min). Results: G4 presented the highest mean values, however, with no statistically significant difference in comparison to G3 (p > 0.05). G2 presented the lowest mean values with statistically significant difference to G3 and G4 (p < 0.05). Conclusions: Ultrasonic vibration with elongated cylindrical-shaped and active rounded tip was most effective in reducing force required for intraradicular post removal.

• Clinical Nutrition Research
• /
• v.5 no.4
• /
• pp.279-289
• /
• 2016

The adequate dietary intake is important to maintain the nutritional status of the patients after pancreatic cancer surgery. This prospective study was designed to investigate the dietary intake and the nutritional status of the patients who had pancreatic cancer surgery. Thirty-one patients (15 men, 16 women) were enrolled and measured body weight, body mass index (BMI), nutritional risk index (NRI), and Malnutrition Universal Screening Tool (MUST). Actual oral intake with nutritional impact symptoms recorded on the clinical research foam at every meal and medical information were collected from electronic medical charts. The rates of malnutrition at admission were 45.1% (14/31) and 28.9% (9/31) by NRI and MUST method, respectively, but those were increased to 87% (27/31) and 86.6% (26/31) after operation on discharge. The median values of daily intake of energy, carbohydrates, fat, and protein were 588.1 kcal, 96.0 g, 11.8 g, and 27.0 g, respectively. Most patients (n = 20, 64.5%) experienced two or more symptoms such as anorexia, abdominal bloating and early satiety. There were negative correlations between C-reactive protein (CRP) levels and the intake of total energy, protein, fat, and zinc. The rates of malnutrition were increased sharply after surgery and the dietary intake also influenced the inflammatory indicators. The results suggested that need of considering special therapeutic diets for the patients who received pancreatic surgery.

• Journal of Environmental Health Sciences
• /
• v.45 no.5
• /
• pp.487-496
• /
• 2019

Objective: The purpose of this study was to create soil contamination maps using QGIS (Quantum Geographic Information System) and suggest selection methods for soil pollution sources for preferential investigation in a soil contamination survey. Method: Data from soil contamination surveys over five years in Gyeonggi-do Province, South Korea (2013-2017) were used for making soil contamination maps and analyzing the density of survey points. By analyzing points exceeding the concern level of soil contamination, soil pollutant sources for priority management were identified and selection methods for preferred survey points were suggested through a study of the model area. Results: A soil contamination survey was conducted at 1,478 points over five years, with the largest number of surveys conducted in industrial complex and factory areas. Soil contamination maps for copper, zinc, nickel, lead, arsenic, fluoride, and total petroleum hydrocarbons were made, and most of the survey points were found to be below concern level 1 for soil contamination. The density of the survey points is similar to that of densely populated areas and factory areas. The analysis results of points exceeding the criteria showed that soil pollutant sources for priority management were areas where ore and scrap metals were used and stored, traffic-related facilities areas, industrial complex and factory areas, and areas associated with waste and recycling. According to the study of the model area, the preferred survey points were traffic-related facilities with 15 years or more since their construction and factories with a score of 10 or more for soil contamination risk. Conclusion: Soil contamination surveys should use GIS for even regional distribution of survey points and for the effective selection of preferred survey points. This study may be used as guidelines to select points for a soil contamination survey.

• Journal of radiological science and technology
• /
• v.44 no.5
• /
• pp.459-464
• /
• 2021

The detector performance is important role in acquiring the gamma rays from patients. Among parameters of detector performances, there is density, which relates to respond to gamma rays. Therefore, we confirm the detection efficiency according to various detector materials based on the density parameter using GATE (geant4 application for emission tomography) simulation tool. The NaI (density: 3.67 g/cm³), CZT (Cadimium Zinc Telluride) (density: 5.80 g/cm³), CdTe (Cadmium Telluride) (5.85 g/cm³), and GAGG (Gadoinium Aluminum Gallium Garnet) (density g/cm³) were used as detector materials. In addition, the point source and quadrant bar phantom, which is modeled for 0.5, 1.0, 1.5, and 2.0 mm thicknesses, were modeled to confirm the quatitative analysis using sensitivity (cps/MBq) and the full width at half maximum (FWHM, mm) at the 2.0 mm bar thickness containing visual evaluation. Based on the results, the sensitivity for NaI, CZT, CdTe, and GAGG detector materials were 0.12, 0.15, 0.16, and 0.18 cps/MBq. In addition, the FWHM for quadrant bar phantom in the 2.0 mm bar thickness is 3.72, 3.69, 3.70, and 3.73 mm for NaI, CZT, CdTe, and GAGG materials, respectively. Compared with performance of detector materials according to density, the high density can improve detection efficiency in terms of sensitivity and mean count. Among these detector materials, the GAGG material is efficient for detection of gamma rays.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.6
• /
• pp.825-834
• /
• 2021

This study was conducted to identify the food components and nutrition value of major fish roes on the market in Korea. The proximate compositions of the roes were 60.02-82.85% moisture, 14.61-29.21% protein, 1.24-14.59% lipid and 0.88-1.78% ash. The major total amino acids in the roes were glutamic acid, leucine, aspartic acid, lysine, and alanine. The major fatty acids were 22:6n-3 (docosahexenoic acid, 9.37-32.68%), 16:0 (5.96-21.39%), 18:1n-9 (12.64-25.30%), and 20:5n-3 (eicosapentaenoic acid, 3.79-16.99%). The mean major-mineral levels were phosphorus (291.63 mg/100 g edible portion), potassium (271.00 mg), sodium (175.86 mg), calcium (24.02 mg), and magnesium (22.15 mg). The mean trace-mineral levels were zinc (7.75 mg), iron (3.68 mg), and copper (0.81 mg). The results suggest that these fish roes are good sources of proteins, amino acids, n-3 fatty acids and minerals.

• Journal of Oral Medicine and Pain
• /
• v.43 no.4
• /
• pp.131-135
• /
• 2018

Purpose: To investigate the correlation between the amount of salivary metal ions released from fixed prostheses and the period of restoration insertion, and to evaluate the correlation between the type and amount of metal ions in saliva and oral lesions (OL). Methods: Based on the oldest prosthesis, we divided patients into two groups: more than 5 years (n=19) and less than 5 years (n=10). Patients were also divided into two groups by another criteria: the one with the presence (n=15), and the one with absence (n=14) of OL, and the amounts of metal ions were examined. Metal ions-gold (Au), copper, cobalt (Co), chromium (Cr), nickel, zinc, aluminum, palladium (Pd), tin, and platinum (Pt)-were measured using laser ablation microprobe inductively coupled plasma mass spectrometry. Results: Significantly higher quantities of Co, Pt, and Pd ions were released in patients with fixed prosthesis of more than 5 years (p<0.05). Measurement of the average amount of salivary metal ions was performed on patients with and without OL - Significantly higher amounts of Cr, Pd and Au ions were released in patients with OL (p<0.05). Conclusions: Old prostheses (${\geq}5years$) released metal ions, and among them were Co, Pt and Pd ions more than others. Patients with OL showed significantly higher levels of ion release, especially Cr, Pd and Au. There was a positive correlation between the amount of a certain kind of released metal ions, especially Pd, and the development of OL. Salivary Pd ion released from old prostheses could affect the pathogenesis of OL; therefore, long-term follow-up is important.

• Restorative Dentistry and Endodontics
• /
• v.46 no.1
• /
• pp.13.1-13.9
• /
• 2021

Objectives: This study aimed to evaluate and compare the efficacy of the S1 reciprocating system and the D-Race retreatment rotary system for filling material removal and the apical extrusion of debris. Materials and Methods: Sixty-four freshly extracted maxillary canines were shaped with size 10 and size 15 K-files, instrumented using ProTaper Gold under irrigation with 2.5% sodium hypochlorite (NaOCl), obturated according to the principle of thermo-mechanical condensation with gutta-percha and zinc oxide eugenol sealer, and allowed to set for 3 weeks at 37℃. Subsequently, the teeth were divided into a control group (n = 4), the D-Race rotary instrument group (n = 30), and the S1 reciprocating instrument group (n = 30). After classical retreatment, the canals were subjected to a complementary approach with the XP-Endo Shaper. Desocclusol was used as a solvent, and irrigation with 2.5% NaOCl was performed. Each group was divided into subgroups according to the timing of radiographic readings. The images were imported into a software program to measure the remaining filling material, the apical extrusion, and the root canal space. The data were statistically analyzed using the Z-test and JASP graphics software. Results: No significant differences were found between the D-Race and S1 groups for primary retreatment; however, using a complementary cleaning method increased the removal of remnant filling (p < 0.05). Conclusions: Classical removal of canal filling material may not be sufficient for root canal disinfection, although a complementary finishing approach improved the results. Nevertheless, all systems left some debris and caused apical extrusion.

• Journal of Integrative Natural Science
• /
• v.16 no.4
• /
• pp.123-131
• /
• 2023

Breast cancer continues to pose a substantial worldwide health challenge, thereby requiring the development of innovative strategies to discover new therapeutic interventions. Signal Transducer and Activator of Transcription 3 (STAT-3) has been identified as a significant factor in the development of several types of cancer, including breast cancer. This is primarily attributed to its diverse functions in promoting tumour formation and conferring resistance to therapeutic interventions. This study presents an in silico drug repositioning approach that focuses on identifying specific inhibitors of STAT-3 for the purpose of treating breast cancer. We initially examined the structural and functional attributes of STAT-3, thereby elucidating its crucial involvement in cellular signalling cascades. A comprehensive virtual screening was performed on a diverse collection of drugs that have been approved by the FDA from zinc15 database. Various computational techniques, including molecular docking, cross docking, and cDFT analysis, were utilised in order to prioritise potential candidates. This prioritisation was based on their predicted binding energies and outer molecular orbital reactivity. The findings of our study have unveiled a Dihydroergotamine and Paritaprevir that have been approved by the FDA and exhibit considerable promise as selective inhibitors of STAT-3. In conclusion, the utilisation of our in silico drug repositioning approach presents a prompt and economically efficient method for the identification of potential compounds that warrant subsequent experimental validation as selective STAT-3 inhibitors in the context of breast cancer. The present study highlights the considerable potential of employing computational strategies to expedite the drug discovery process. Moreover, it provides valuable insights into novel avenues for targeted therapeutic interventions in the context of breast cancer treatment.

• Journal of Plant Biotechnology
• /
• v.42 no.3
• /
• pp.204-214
• /
• 2015

SHI-RELATED SEQUENCE (SRS) genes are plant-specific transcription factors that contain a zinc-binding RING finger motif, which play a critical role in plant growth and development. Among Brassica rapa SRS genes, BrSRS7 and BrLRP1 genes, isolated from shoot apical regions are important regulators of plant growth and development. In order to explore the function of BrSRS genes in horticultural plant growth and development, two constructs containing BrSRS7 and BrLRP1 under the control of a cauliflower mosaic virus 35S promoter were introduced into petunia by Agrobacterium-mediated transformation. The resulting transgenic plants were dwarf and compact plants with reduced plant height and diameter. Additionally, these transgenic plants had upward-curled leaves of narrow width and short internodes. Interestingly, the flower shapes of petunia were different among transgenic plants harboring different kinds of SRS genes. These phenotypes were stably inherited through generations $T_2$ and $T_3$. Semi-quantitative RT-PCR analyses of transgenic plants revealed that BrSRS7 and BrLRP1 regulate expression of gibberellin (GA)- and auxinrelated genes, PtAGL15- and PtIAMT1-related, involved in shoot morphogenesis. These results indicate that the overexpression of BrSRS7 and BrLRP1 genes suppressed the growth and development of petunia by regulating expression of GA- and auxin-related genes. From these data, we deduce that BrSRS7 and BrLRP1 genes play an important role in the regulation of plant growth and development in petunia. These findings suggest that transformation with the BrSRS genes can be applied to other species as a tool for growth retardation and modification of plant forms.