• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3272-3278
• /
• 2010

Synthesis and structural characterization of peripherally ferrocene-substituted zinc phthalocyanine (ZnPc-Fc) were carried out for efficient far-red/near-IR performance in dye-sensitized nanostructured $TiO_2$ solar cells. Incorporating ferrocene into phthalocyanine strongly improved the dye solubility in polar organic solvents, and reduced surface aggregation due to the steric effect of bulky ferrocene substituents. The involvement of electron transfer reaction pathways between ferrocene and phthalocyanine in ZnPc-Fc was evidenced by completely quenched fluorescence from S1 state (< 0.08% vs ZnPc). Strong absorption bands at 542 and 682 nm were observed in the transient absorption spectroscopy of ZnPc-Fc in DMSO, which was excited at a 670 nm laser pulse with a 15 ps full width at half maximum. Also, the excited state absorption signals at 450 - 600 and 750 - 850 nm appeared from the formation of charge separated state of phthalocyanine's anion. The lifetime of the charge separate state in ZnPc-Fc was determined to be $170{\pm}8$ ps, which was almost 17 times shorter than that of the ZnPc.

• Structural Engineering and Mechanics
• /
• v.82 no.2
• /
• pp.163-172
• /
• 2022

Zinc-rich epoxy (ZRE) is used to overcome corrosion problems in reinforced concrete (RC) beams and coat steel rebars to protect them from humidity and chlorides. An extra coating layer of Sikadur-31 epoxy (SDE) is utilised to increase bond strength because the use of ZRE reduces the bond strength between concrete and steel rebars. However, the low melting point of SDE indicates that concrete specimens are vulnerable to fire. An experimental investigation on flexural performance of RC beams incorporating ZRE-SDE coating of steel rebars that were destroyed by fire is performed in this study. Twenty beams of five concrete mixes with different cementitious contents were tested to compare fire exposure for coated and uncoated rebars of the same beams at room temperature and determine the optimal cementitious content. Scanning electron microscopy (SEM) was also applied to investigate characteristics of fired mixture samples. Results showed that the use of SDE-ZRE at room temperature improves flexural strengths of the five mixes compared with uncoated rebars with percentages ranging from 8.5% to 12.3%. All beams with SDE-ZRE lost approximately 50% of their flexural strength due to firing. Moreover, the mix incorporating SF (silica fume) of 15% and cement content of 400 kg/m³ introduces optimum behaviour compared with other mixes. All results were supported and verified by the SEM analysis and compressive strength of cubic specimens of the same mixes.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.4
• /
• pp.154-161
• /
• 2017

$Zn_2TiO_4$, which is a progenitor of zinc crystallization, plays a significant role in controlling the crystallization of willemite ($Zn_2SiO_4$) in forming glaze at low temperatures. Thus, $Zn_2TiO_4$ was used to formulate stable willemite and to gain structural control. When synthesized 15 wt% of $Zn_2TiO_4$ is added to engobe and then applied, it can manipulate its crystallization and location. Additionally, when colorant is added to $Zn_2TiO_4$ and then applied to engobe, the mixture's colorant effect can be shown at crystallization. Certain characteristics of synthesized $Zn_2TiO_4$ enable various engobes to be applied to clay bodies. With a single glazing, the crystallization, location, and color of the crystals can be discretionarily regulated.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.1
• /
• pp.191-196
• /
• 2010

Aluminum doped zinc oxide (AZO) films have been prepared on Coming 7059 glass substrates by r.f. magnetron sputtering method. A powder target instead of a conventional sintered ceramic target was used in order to improve the utilization efficiency of the target and reduce the cost of the film deposition process. The influence of sputter pressure on the structural, electrical, and optical properties of AZO films were studied. The AZO films had hexagonal wurtzite structure with a preferred c-axis orientation, regardless of sputter pressure and target types. The crystallinity and degree of orientation was increased by increasing the sputter pressure. For higher sputtering pressures, a reduction of the resistivity was observed due to a increase on the mobility and the carrier concentration. The lowest resistivity of $6.5{\times}10^{-3}\;{\Omega}-cm$ and the average transmittance of 80% can be obtained for films deposited at 15 mTorr.

• Journal of the Korean Dietetic Association
• /
• v.29 no.2
• /
• pp.73-85
• /
• 2023

This study examined the nutritional information using the nutrition labels of gimbap sold at convenience stores and evaluated nutritional adequacy compared to dietary reference intakes for Korean adolescents. Thirty gimbaps (triangular gimbaps and regular gimbaps according to the main ingredients of vegetables, fish, and meat) were purchased at five convenience stores of different brands with many stores in Korea. The food and nutrition labels of the gimbaps were investigated, and nine minerals were analyzed using inductively coupled plasma-mass spectrometry (ICP-MS). The average price of gimbap was 1,906.7 won, and average energy was 292.0 kcal, and the protein content was 15.5% of the recommended intake for Korean male adolescents aged 15~18 years. The mineral content ranged from 6.9% for zinc to 39.0% for selenium. Except for sodium and selenium, the energy, protein, and mineral content did not meet 1/3 of dietary reference intakes for adolescents. For the index of nutritional quality (INQ), calcium and zinc were the lowest in the triangular and regular gimbap, respectively. The INQ of potassium was significantly higher in triangular gimbap with vegetables. The content and INQ of selenium were in regular gimbap with fish, and the zinc INQ was in regular gimbap with meat. Overall, gimbap sold in convenience stores has a high sodium content, and the contents of energy, protein, and minerals, except selenium, are insufficient for a single meal.

• Journal of the Korean Professional Engineers Association
• /
• v.15 no.1
• /
• pp.36-40
• /
• 1982

This study is to characterize Ago stability useful for manufacturing silver oxide button cell, and deter mined by test tube gassing evaluations and by cell expansion and further discuss en the effectiveness of pellet reduction treatments to obtain single plateau discharge Profile and relevent performance.

• Journal of the Korean Professional Engineers Association
• /
• v.15 no.3
• /
• pp.12-18
• /
• 1982

Preliminary investigation have been made on what the capacity of high rate pulsed discharge of Ago-Zn button cells were associated with the changes of cathode construction feature, mix formulation, separator and electrolyte concentration.

• Economic and Environmental Geology
• /
• v.3 no.3
• /
• pp.141-161
• /
• 1970

The outline of general trend on production, consumption and price of non-ferrous metals during 1969 is summerized in the paper. The production of every non-ferrous metals has increased compare to that of last year, and their consumption except silver has also increased. Specially the rate of growth of production is that; The rate of growth of consumption is such; The prices of gold and silver have decreased since last November due to the stability of international currency and the creation of S.D.R. at I.M.F., but those of other metals have increased, marking the price at the end of 1969 as follows: Cupper price of Foreign Refinery showed ¢72.471/lb(increased 39% per year), lead and Zinc jumped up to the highest price since the Korean War (1951-1953), showing the lead price ¢16.50/lb (increased 27% per year) and the zinc price ¢15.50/lb (increased 15% per year). Price of tungsten was higher than the agreed price that was made between Korea and U.S.A. during 1951 through 1954, showing $63.4/S.T.U. (increased 13% per year). The price of molybdenum was slightly increased from $1.62 to $1.72 (increased 6% per year). In summing up, the year of 1969 was the golden age for the nonferrous metals. It is, hawever, expected that in the next few years, the consumption rate and the prices of non-ferrous metals will be declined compared to those of 1969.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.4
• /
• pp.207-212
• /
• 2014

Aluminum-doped zinc oxide (AZO) films were deposited on SiOC/Si wafer by an RF-magnetron sputtering system, by varying the deposition parameters of radio frequency power from 50 to 200 W. To assess the correlation of the optical properties between the substrate and AZO thin film, photoluminescence was measured, and the origin of deep level emission of AZO thin films grown on SiOC/Si wafer was studied. AZO formed on SiOC/Si substrates exhibited ultraviolet emission due to exciton recombination, and the visible emission was associated with intrinsic and extrinsic defects. For the AZO thin film deposited on SiOC at low RF-power, the deep level emission near the UV region is attributed to an increase of the variations of defects related to the AZO and SiOC layers. The applied RF-power influenced an energy gap of localized trap state produced from the defects, and the gap increased at low RF power due to the formation of new defects across the AZO layer caused by lattice mismatch of the AZO and SiOC films. The optical properties of AZO films on amorphous SiOC compared with those of AZO film on Si were considerably improved by reducing the roughness of the surface with low surface ionization energy, and by solving the problem of structural mismatch with the AZO film and Si wafer.

• Journal of Environmental Science International
• /
• v.22 no.10
• /
• pp.1327-1335
• /
• 2013

Na-A zeolite (Z-Cl) was synthesized from coal fly ash, which is a byproduct of coal combustion for the generation of electricity. The adsorption of $Cu^{2+}$ and $Zn^{2+}ions$ onto Z-C1 was investigated via batch tests over a range of temperatures (303.15 to 323.15 K). The resultant experimental equilibrium data were compared to theoretical values calculated using model equations. With these results, the kinetics and equilibrium parameters of adsorption were calculated using Lagergren and Langmuir-Freundlich models. The adsorption kinetics revealed that the pseudo second-order kinetic mechanism is predominant. The maximum adsorption capacity ($q_{max}$) values were 139.0-197.9 mg $Zn^{2+}$/g and 75.0-105.1 mg $Cu^{2+}/g$. Calculation of the thermodynamic properties revealed that the absorption reactions for both $Cu^{2+}$ and $Zn^{2+}$ were spontaneous and endothermic. Collectively, these results suggest that the synthesized zeolite, Z-C1, can potentially be used as an adsorbent for metal ion recovery during the treatment of industrial wastewater at high temperatures.