• Journal of the Semiconductor & Display Technology
• /
• v.6 no.3
• /
• pp.25-33
• /
• 2007

A computationally efficient and accurate Monte Carlo (MC) simulator of electron beam lithography process, which is named SCNU-EBL, has been developed for semiconductor nanometer pattern design and fabrication. The simulator is composed of a MC simulation model of electron trajectory into solid targets, an Gaussian-beam exposure simulation model, and a development simulation model of photoresist using a string model. Especially for the trajectories of incident electrons into the solid targets, the inner-shell electron scattering of an target atom and its discrete energy loss with an incident electron is efficiently modeled for multi-layer resists and heterogeneous multi-layer targets. The simulator was newly applied to the development profile simulation of ZEP520 positive photoresist for NGL(Next-Generation Lithography). The simulation of ZEP520 for electron-beam nanolithography gave a reasonable agreement with the SEM experiments of ZEP520 photoresist.

• Journal of the Korean Vacuum Society
• /
• v.15 no.6
• /
• pp.637-641
• /
• 2006

We present the DC and RF characteristics of 100 nm gate length InGaAs/InAlAs/GaAs metamorphic high electron mobility transistors (MHEMTs). We fabricated the T-gate with 100 nm foot print by using a positive resist ZEP520/P (MMA-MAA)/PMMA trilayer by double exposure method. The fabricated 100 nm MHEMT with a $70\;{\mu}m$ unit gate width and two fingers were characterized through do and rf measurements. The maximum drain current density of 465 mA/mm and extrinsic transconductance $(g_m)$ of 844 mS/mm were obtained with our devices. From rf measurements, we obtained the current gain cut-off frequency $(f_T)$ of 192 GHz, and maximum oscillation frequency $(f_{max})$ 310 GHz.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.9
• /
• pp.19-24
• /
• 2004

In this paper, we have demonstrated the fabrication of a 70 nm foot print of the T-gate by using a positive resist ZEP520/P(MMA-MAA)/PMMA trilayer by double exposure method without a thin dielectric supporting layer on the substrate. The device performance was characterized by DC and RF measurement. The fabricated 70 nm InGaAs/InAlAs MHEMTS with 70 ${\mu}{\textrm}{m}$ unit gate width and 2 fingers showed good DC and RF characteristics of Idss, max =228.6 mA/mm, gm =645 mS/mm, and fT =255 GHz, respectively.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.359-362
• /
• 2004

Electron beam on high energy acceleration, which travels deeply and sharply through photoresist, became to be used in e-beam lithography apparatus for nano-patterning in due to its high resolution. An advanced electron beam lithography simulation tool is currently undergoing development for nano-patterning. This paper will demonstrate such simulation efforts with experiments at 200 keV e-beam lithography processes on PMMA, ZEP520 of which photoresist parameters and characteristics will be explained with simulation results. Neureuther parameters was extracted from the contrast curve of the resist

• Journal of Magnetics
• /
• v.12 no.1
• /
• pp.12-16
• /
• 2007

Magnetic excitation and reversal by a spin polarized current via spin transfer have been a central research topic in spintronics due to its application potential. Special techniques are required to fabricate nano-scale magnetic layers in which the effect can be observed and studied. This work discusses the possibility of using electron-beam resists, the nano-scale patterning media, as ion milling mask in a subtractive fabrication method. The possibility is demonstrated by two resists, one positive tone, the ZEP 520A, and one negative tone, the ma-N2403. The advantage and the key points for success of this process will be also addressed.