• Journal of Korea Water Resources Association
• /
• v.54 no.5
• /
• pp.321-334
• /
• 2021

A fixed reflectivity-rainfall relationship approach, such as the Marshall-Palmer relationship, for an entire year and different seasons, can be problematic in cases where the relationship varies spatially and temporally throughout a region. From this perspective, this study explores the use of long-term radar reflectivity for South Korea to obtain a nationwide calibrated Z-R relationship and the associated uncertainties within a Bayesian inference framework. A calibrated spatially structured pattern in the parameters exists, particularly for the wet season and parameter for the dry season. A pronounced region of high values during the wet and dry seasons may be partially associated with storm movements in that season. Overall, the radar rainfall fields based on the proposed modeling procedure are similar to the observed rainfall fields. In contrast, the radar rainfall fields obtained from the existing Marshall-Palmer relationship show a systematic underestimation. In the event of high impact weather, it is expected that the value of national radar resources can be improved by establishing an active watershed-level hydrological analysis system.

• Korean Journal of Breeding Science
• /
• v.43 no.4
• /
• pp.330-336
• /
• 2011

A comparative study was conducted on genetic correlation between 12 open-pollinated families (32-year-old) and their one-year-old seedlings for early selection on the fast-growing trait in Pinus densiflora S. et Z.. Those twelve families were divided into three groups such as superior, intermediate, and inferior, on the base of the growth indexes of 32-year-old P. densiflora. The growth performance of the 32-year-old P. densiflora showed significant correlation with the growth traits of their one-year-old seedlings. Dry weights of the seedlings had significant correlation (P < 0.01) with the growth index of the adult plants and its $R^2$ value was 0.597, suggesting that 59.7% of the families could be selected by using dry weights of one-year-old seedlings. Furthermore, the growth rates of seedling heights for superior, intermediate, and inferior groups were 4.568, 3.773, and 3.535, respectively, resulting that seedlings of the superior group grew approximately 1.3-fold faster than those of the inferior group. Therefore, we concluded that two growth traits of one-year-old seedlings dry weight and growth rate were suppose to the early selection factors for the fast-growing trait for P. densiflora.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.11
• /
• pp.828-833
• /
• 2018

It is well known that reflected waves and resonance affect phase distortion. In addition, phase delay can be distorted by antenna impedance. In this study, we analyze the phase delay variation caused by the antenna impedance, considering mutual coupling effects. In addition, we confirm the beam steering characteristics. When was -10 dB and -7 dB, the maximum phase delay error was $18.5^{\circ}$ and $26.5^{\circ}$, respectively. The Monte Carlo simulation with an eight-element linear array antenna demonstrated that the RMS error of the beam steering angle ranged from $0.19^{\circ}$ to $0.4^{\circ}$, and the standard deviation ranged from $0.14^{\circ}$ to $0.33^{\circ}$ when the beam steering angle was in the range of $0^{\circ}$ to $30^{\circ}$, with the uniformly distributed phase error of $18.5^{\circ}$ and $26.5^{\circ}$. The side lobe level increased from 0.74 dB to 1.21 dB by the phase error from the theoretical value of -12.8 dB, with a standard deviation of 0.31 dB to 0.51 dB. This is verified by designing an eight-element spiral array antenna.

• Design & Manufacturing
• /
• v.13 no.2
• /
• pp.30-36
• /
• 2019

Traditional cell culture(2-dimensional) is the method that provide a nutrient and environment on a flat surface to cultivate cells into a single layer. Since the cell characteristics of 2D culture method is different from the characteristics of the cells cultured in the body, attempts to cultivate the cells in an environment similar to the body environment are actively proceeding in the industry, academy, and research institutes. In this study, we will develop a technology to fabricate micro-structures capable of culturing cells on surfaces with various curvatures, surface shapes, and characteristics. In order to fabricate the hemispheric plastic structure(thickness $50{\mu}m$), plastic preform mold (hereinafter as "preform mold") corresponding to the hemisphere was first prepared by injection molding in order to fabricate a two - layer structure to be combined with a flat plastic film. Then, thermoplastic polymer dissolved in an organic solvent was solidified on a preform mold. As a preliminary study, we proposed injection molding conditions that can minimize X/Y/Z axis deflection value. The effects of the following conditions on the preform mold were analyzed through injection molding CAE, [(1) coolant inlet temperature, (2) injection time, (3) packing pressure, (4) volume-pressure (V/P). As a result, the injection molding process conditions (cooling water inlet temperature, injection time, holding pressure condition (V / P conversion point and holding pressure size)) which can minimize the deformation amount of the preform mold were derived through CAE without applying the experimental design method. Also, the derived injection molding process conditions were applied during actual injection molding and the degree of deformation of the formed preform mold was compared with the analysis results. It is expected that plastic film having various shapes in addition to hemispherical shape using the preform mold produced through this study will be useful for the molding preform molding technology and cast molding technology.

• The Journal of the Korea Contents Association
• /
• v.19 no.6
• /
• pp.491-503
• /
• 2019

In commemoration of the centennial anniversary of the March 1 movement in 2019, the research looked at the significance and influence of the March 1 movement on Korean history and highlighted what the church of the 4th Industrial Revolution era should play. The meaning of the March 1 movements to modern society has been identified as follows. First, the Church needs a clear sense of responsibility for society. Second, there is a need for attention to the next generation, the existing future. Third, practical education is needed for young people. Fourth, what is as important as a dreams is the value in it. Focusing on these facts, the study suggested what modern church roles should be like in the era of the Fourth Industrial Revolution. First, the church should attempt a missional approach that emphasizes the sense of belonging. Second, education for the next generation, called the Z generation, is paramount. Third, the church of the new era should be the leader of the civil society movement. Fourth, efforts are needed to realize the identity of the church. So the Church of the Fourth Industrial Revolution era should be a more missional community that reveals the kingdom of God in everyday life.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.117-125
• /
• 2021

Purpose: To purpose of this study is to find the correlation of the Set-up error according to the couch rotation and suggest additional margin setting for the GTV. Target and Method: Each scenario treatment plan was created by making the frequency of non-coplanar beams different among all beams. The set-up error value was measured by using the Exact System and the dose accuracy was evaluated by creating a re-treatment plan. Results: When the couch was rotated by 30°, 45°, 60°, and 90°, the mean of the X-axis values was measured to be 0.29 mm, 0.26 mm, 0.51 mm, and 0.08 mm, respectively. The mean of the Y-axis values was measured to be 0.75 mm, 0.5mm, 0.35 mm, and 0.29 mm, respectively. The mean of the Z-axis values was measured to be 0.5 mm, 0.28 mm, 0.22 mm, and 0.1 mm, respectively. There were dose reductions of 0.1%, 3.1%, 1.9% in D99 for 1-NC VMAT, 2-NC VMAT, and 3-NC VMAT, respectively. Conclusion: When treating with 50% or more of non-coplanar beams among total beams, image verification is required. And it is considered to make the treatment plan by adding a 1.5 mm margin to the GTV.

• Journal of Forest and Environmental Science
• /
• v.39 no.1
• /
• pp.20-26
• /
• 2023

Cow pea (Vigna unguiculata) was intercropped with Ziziphus spina-christi as summer forage in two consecutive seasons of 2017 and 2018. The aims to find out suitable agroforestry practice for saline soils of Khartoum State. And to investigate effect of tree spacing on forage biomass yield under semi -irrigated systems. Completely randomized block design with 3 replicates was conducted for this trial. Thus Z.spina-christi that fixed at 4×4 m was intercropped with cowpea at 1 m and 1.5 m spacing from trees trunk. Tree growth parameters were measured in terms of tree height, tree collar diameter, tree crown diameter and fruit yield per tree. While crop were parameters were determined in terms of plant height, number of plant, forage biomass yield per ha and land equivalent ratio. Soil profile of 1×1 m and 1.5 m depth was excavated and its features were described beside its chemical and physical properties were analyzed for 0-10 cm, 0-30 cm, and 30-60 cm and 60-100 cm layers. The results revealed that soil pH, CaCO₃, SAR, ESP, and EC ds/m were increased by increasing soil depths. Meanwhile tree growth in terms of tree height was significant in the first season 2017 when compared with tree collar diameter and tree crown diameter. Also significant differences were recorded for tree growth when compared with sole trees in the second season in 2018. Tree fruit showed marked variations between the two seasons, but it was higher under intercropping particularly at ZS2. Crop plant height was highly significant under sole cropping than intercropping in first season in 2017. In contrast forage biomass yield was significant under intercropping in ZS1 and ZS2 treatments. Land equivalent ratio was advantageous under this agroforestry system particularly under ZS2. Thus it recorded 5 and 9 for ZS2 in the two consecutive seasons respectively. Therefore, it is feasible to introduce this agroforestry system under such arid lands to provide summer forage yield of highly nutritive value and low cost for animals feed as well as to increase farmers' income and to halt desertification and to sequester carbon.

• Journal of Korean Society of Forest Science
• /
• v.111 no.1
• /
• pp.50-60
• /
• 2022

In this study, habitat suitability was analyzed for three major honey tree species, namely Kalopanax septemlobus, Tilia amurensis, and Styrax obassis, in the Baekdudaegan Mountains using MaxEnt models. The AUC values indicating the prediction accuracies of the models were 0.747, 0.790, and 0.755 for K. septemlobus, T. amurensis, and S. obassis, respectively. The most important variables for K. septemlobus and T. amurensis were elevation, mean annual temperature, and slope, whereas mean annual temperature, elevation, and mean annual precipitation were the most important predictors for S. obassis. For all three studied species, elevation and mean annual temperature were the most important topographic and climatic factors, respectively, indicating that such variables are crucial for explaining species distribution. Honey tree species are essential resources in forest beekeeping, a high value-added process for improving forest income, and this study identified sites with the potential for management of such species in the Baekdudaegan Mountains, where it may be possible to establish a honey forest. However, the accuracy of the models should be improved through comprehensive analysis with abiotic variables, such as soil properties and aridity, which affect the distribution of honey tree species, as well as biotic variables, such as interspecific competition.

• Animal Bioscience
• /
• v.37 no.2
• /
• pp.274-283
• /
• 2024

Objective: The aim of the study was to evaluate the physicochemical properties (nutrient composition, pH, water content and activity, sorption properties) and mechanical properties (compression force and energy) of granulated feed mixtures with various inclusion levels of crude fibre concentrates ARBOCEL and VITACEL for broiler chickens, i.e. +0.0% (control group - group C), +0.3%, +0.8%, +1.0%, +1.2%. Methods: The feed mixtures were analyzed for their physicochemical properties (nutrient composition by near-infrared spectroscopy, pH with the use a CP-401 pH meter with an IJ-44C glass electrode, water content was determined with the drying method and activity was determined with the Aqua Lab Series 3, sorption properties was determined with the static method) and mechanical properties (compression force and energy with the use TA-HD plus texture analyzer). The Guggenheim-Anderson-de Boer (GAB) model applied in the study correctly described the sorption properties of the analyzed feed mixtures in terms of water activity. Results: The fibre concentrate type affected the specific surface area of the adsorbent and equilibrium water content in the GAB monolayer (p≤0.05) (significantly statistical). The type and dose of the fibre concentrate influenced the dimensionless C and k parameters of the GAB model related to the properties of the monolayer and multilayers, respectively (p≤0.05). They also affected the pH value of the analyzed feed mixtures (p≤0.05). In addition, crude fibre type influenced water activity (p≤0.05) as well as compression energy (J) and compression force (N) (p≤0.001) (highly significantly statistical) of the feed mixtures. Conclusion: The physicochemical analyses of feed mixtures with various inclusion levels (0.3%, 0.8%, 1.0%, 1.2%) of crude fiber concentrates ARBOCEL or VITACEL demonstrated that both crude fiber types may be used in the feed industry as a feedstuff material to produce starter type mixtures for broiler chickens.

• Applied Biological Chemistry
• /
• v.15 no.1
• /
• pp.65-75
• /
• 1972

The rice qualities including cooking and eating qualities were studied using recommended Korean rice varieties (20 of japonica and 3 of indies type; IR 667) which were grown at Suwon, Korea in 1971. As the result, followings were obtained. 1. Amylose contents of white rice were varied with the varieties 21.1 to 25.5% and the average was 23.0%. Three indica type varieties (IR 667) showed higher amylose contents than the other japonica type varieties except Mankyung. Among japonica type varieties, Palkum, Mankyung composed the group of the highest amyloes content and Kimmaje was the lowest. 2. Blue values were distributed in the range of 0.38 to 0.48 and the average was 0.42 IR 667 varieties showed the highest blue value among them. Among japonica type varieties, Jaegun showd the highest blue value and Sooseung, Shirogane showed successively lower values, Shin #2, Nongbaik, Palkweng, Suwon #82, Mankyung, Nonglim #25 and Nongkwang relatively lower blue values. 3. Alkali numbers were in the range of 6.0 to 7.4 and the average was 6.8. Much difference was not shown in alkali number between IR 667 group and the japonica varieties group. 4. Gelatinization temperature were ranged from 59.5 to 64.0 IR 667 varieties showed relatively higher gelatinization temperature than japonica type varieties. 5. Water uptake ratios were measured in the range of 2.67 to 2.92 and the average was 2.79. IR 667 varieties were belonged to the group of highest water uptake ratio. Among japonica type varieties Kimmaje, Suwon #82, Nonglim #29, Deungpan #5, Jaegun, Jinhung, were belonged to the group of relatively high water uptake ratio and Palkweng, Palkeum and Paldal to the relatively low water uptake ratio. 6. Expaned volums were ranged from 29.8 to 33.7 and the average was 31.8. IR 667 varieties showed higher expanded volumes than japonica type varieties. 7. Intensities of starch-iodine blue value of residual liquid indicated 0.35 to 0.58. Among them IR 667 varieties showed relatively high intensities. 8. The range of total solids in residual liquids was 0.605 to 0.810 and the average was 0.700 Much difference was not shown in total solids in residual liquid between IR 667 varieties and japonica varieties. 9. pH values of residual liquids were in the range of 6.3 to 7.3 and the average was 6.95. IR 667 varieties showed lower pH than japonira type varieties.