• Journal of Environmental Impact Assessment
• /
• v.20 no.2
• /
• pp.207-215
• /
• 2011

In order to establish fundamental data for stream restoration and environmental flow, we investigated physical habitat conditions of Korean chub (Zacco koreanus) in the typical streams of Han River. Field monitoring including fish sampling was conducted from September 2008 to April 2010. A total number of fish caught in the 8 sites was 3,421 representing 8 families 31 species, and 17 species (54.8%) including Korean shinner (Coreoleuciscus splendidus) and Z. koreanus were Korean endemic species during the study period. The most frequently found species in number was pale chub (Z. platypus, 25.7%) followed by Z. koreanus (22.8%) and Microphysogobio longidorsalis (16.8%). Numbers of Z. Koreanus ranged from 8 to 10 cm of total length were the highest in size distribution of their population in all sites. They were widely found in ranges of flow velocity (0.2~0.9 m/sec, 89.6%), water depth (0.3~0.9 m, 91.6%), and different types of substrates except for silt, and they tended to prefer run (58.1%) and riffle (33.7%) with cobble bed (47.0%) microhabitat. Most of upper streams in Korea consist of riffles and runs that are repeatedly followed by another one. However, stream channelization and leveling have caused reduction of habitat diversity. Therefore, it is necessary to make an effort on stream rehabilitation with evaluation of physical habitat condition by indicator species in order to maintain biodiversity and perform ecological restoration.

• Restorative Dentistry and Endodontics
• /
• v.26 no.2
• /
• pp.134-140
• /
• 2001

The polymerization shrinkage of composite resins is an important drawback although the composites have many advantages-more esthetic and conservative than metallic restoratives etc. The purposes of this research were to develop a new measurement method and to manufacture an instrument that can measure the initial dynamic volumetric shrinkage of composite resins during polymerization. The instrument was basically an electromagnetic balance that constructed with a force transducer using position sensitive photo detector(PSPD) and a negative feedback servo amplifier of proportional-derivative(PD) controller. The volumetric change of composites during polymerization was detected continuously as buoyancy change in distilled water by means of Archimedes's principle. It was converted to continuous electrical voltage signal in real time. The signal was properly conditioned and filtered and then it was stored in computer by a data acquisition(DAQ) board. By using this electronic instrument. the dynamic patterns of the polymerization shrinkage of eight commercial(Z-100, DenFil, AeliteFil, Z-250, P-60, SureFil, Synergy compact, and Tetric ceram) composite resins were measured and compared. The results were as follows. 1. From this project of developing instrument, the ability has been achieved that can acquire and process data of electrical signal transformed from various physical phenomenon by using temperature, displacement. photo. and force transducer. As a consequence, the instrumentation and measurement system used to analyze the physical characteristics of various dental materials in dental research field can be designed, manufactured and implemented in lab. 2. This instrument has some advantages. It was insensible to temperature change and could measure true dynamic volumetric shrinkage in real time without complicated process. It showed accuracy and high precision results with small standard deviation. 3. The polymerization shrinkage of composites was significantly different between brands and ranged from 2.47％ to 3.89％, The order of polymerization shrinkage was as follows, in order of increasing shrinkage, SureFil, P60, Z250, Z100, Synergy compact. DenFil, Tetric ceram, and AeliteFil. 4. The polymerization shrinkage rate per unit time, dVol％/dt, showed that the instrument can provide an indirect research method for polymerization reaction kinetics.

• Journal of Environmental Science International
• /
• v.21 no.7
• /
• pp.805-813
• /
• 2012

The removal property of Cu and Zn ions by chemical precipitation and adsorption using zeolite(Z-C1) prepared from coal fly ash(CFA) were evaluated in this study. Adsorption kinetic and equilibrium mechanisms described to analyze parameters and correlation factors with Lagergen $1^{st}$ and $2^{nd}$ order model and Langmuir and Freundlich model. Analysis of adsorption kinetics data revealed that the pseudo $2^{nd}$ order kinetics mechanism was predominant. The equilibrium data in pH 3 - 5 were able to be fitted well to a Langmuir model, by which the maximum adsorption capacities($q_{max}$) were determined at 124.9 - 140.1 mg $Cu^{2+}/g$ and 153.2 - 166.9 mg $Zn^{2+}/g$, respectively. We found that Z-C1 has a potential application as absorbents in metal ion recovery with low pH.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.3
• /
• pp.1-4
• /
• 1982

The purpose of this paper is to find and compare efficient and "statistically accurate" algorithms for linear systems with bandlimited random inputs. Using the previously investigated truncated expansions[2], a new state-transition algorithm is derived. With statistical error criteria (mean-square error), comparative study on the Performances has been done for the first and second-order linear system models. The results show that a new bandlimited state-transition algorithm works better than any commonly used algorithms (e. g., first-order state-transition method or Z-transform method).

• Journal of electromagnetic engineering and science
• /
• v.13 no.1
• /
• pp.38-43
• /
• 2013

We derive the Z-parameters for the two coupled antennas used for wireless power transfer under the assumption that the antennas are canonical minimum scattering antennas. Using the Z-parameter and the maximum power transfer efficiency formula, we determine the maximum power transfer efficiency of wireless power transfer systems. The results showed that the maximum power transfer efficiency increases as the mode number or the radiation efficiency increases. To verify the theory, we fabricate and measure two different power transfer systems: one comprises two antennas generating $TM_{01}$ mode; the other comprises two antennas generating $TM_{02}$ mode. When the distance between the centers of the antennas was 30 cm, the maximum power transfer efficiency of the antennas generating the $TM_{02}$ mode increased by 62 % compared to that of the antennas generating the $TM_{01}$ mode.

• Bulletin of the Korean Mathematical Society
• /
• v.50 no.3
• /
• pp.731-745
• /
• 2013

In this paper, we investigate uniqueness problems of certain types of $q$-difference polynomials, which improve some results in [20]. However, our proof is different from that in [20]. Moreover, we obtain a uniqueness result in the case where $q$-differences of two entire functions share values as well. This research also shows that there exist two sets, such that for a zero-order non-constant meromorphic function $f$ and a non-zero complex constant $q$, $E(S_j,f)=E(S_j,{\Delta}_qf)$ for $j=1,2$ imply $f(z)=t{\Delta}_qf$, where $t^n=1$. This gives a partial answer to a question of Gross concerning a zero order meromorphic function $f(z)$ and $t{\Delta}_qf$.

• Journal of applied mathematics & informatics
• /
• v.22 no.1_2
• /
• pp.403-410
• /
• 2006

For a finite group G, #Cent(G) denotes the number of centralizers of its elements. A group G is called n-centralizer if #Cent(G) = n, and primitive n-centralizer if #Cent(G) = #Cent($\frac{G}{Z(G)}$) = n. The first author in [1], characterized the primitive 6-centralizer finite groups. In this paper we continue this problem and characterize the primitive 7-centralizer finite groups. We prove that a finite group G is primitive 7-centralizer if and only if $\frac{G}{Z(G)}{\simeq}D_{10}$ or R, where R is the semidirect product of a cyclic group of order 5 by a cyclic group of order 4 acting faithfully. Also, we compute #Cent(G) for some finite groups, using the structure of G modulu its center.

• Communications of the Korean Mathematical Society
• /
• v.18 no.1
• /
• pp.95-104
• /
• 2003

The deformation spaces of the six orientable 3-dimensional flat Riemannian manifolds are studies. It is proved that the Teichmuller spaces are homeomorphic to the Euclidean spaces. To state more precisely, let $\Phi$ denote the holonomy group of the manifold. Then the Teichmuller space is homeomorphic to (1) ${\mathbb{R}}^6\;if\;\Phi$ is trivial, (2) ${\mathbb{R}}^4\;if\;\Phi$ is cyclic with order two, (3) ${\mathbb{R}}^2\;if\;\Phi$ is cyclic of order 3, 4 or 6, and (4) ${\mathbb{R}}^3\;if\;\Phi\;\cong\;{\mathbb{Z}_2}\;\times\;{\mathbb{Z}_2}$.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.175-184
• /
• 1997

In this study, the basic theory of geomagnetism was introduced and the field data of first order magnetic survey was analyzed to determine geographical distribution of magnetic elements such as Declination(D), Inclination(1), Horizontal Component(H), Vertical Component(Z) and Total Force(F). From this distribution equations, the distribution of geomagnetism of Korean peninsula was examined and the declination was calculated for National Base Maps.

• Journal of the Optical Society of Korea
• /
• v.9 no.1
• /
• pp.6-12
• /
• 2005

The perturbation approach is applied to solve the nonlinear Schrodinger equation, and its valid range has been determined by comparing with the results of the split-step Fourier method over a wide range of parameter values. With γ= 2㎞/sup -1/mW/sup -1/, the critical distance for the first order perturbation approach is estimated to be(equation omitted). The critical distance, Z/sub c/, is defined as the distance at which the normalized square deviation compared to the split-step Fourier method reaches 10/sup -3/. Including the second order perturbation will increase Z/sub c/ more than a factor of two, but the increased computation load makes the perturbation approach less attractive. In addition, it is shown mathematically that the perturbation approach is equivalent to the Volterra series approach, which can be used to design a nonlinear equalizer (or compensator). Finally, the perturbation approach is applied to obtain the sinusoidal response of the fiber, and its range of validity has been studied.