• 제목/요약/키워드: Z-Factor

검색결과 598건 처리시간 0.025초

확장 칼만 필터를 활용한 Z-R 관계식의 매개변수 실시간 결정 (Using Extended Kalman Filter for Real-time Decision of Parameters of Z-R Relationship)

  • 김정호;유철상
    • 한국수자원학회논문집
    • /
    • 제47권2호
    • /
    • pp.119-133
    • /
    • 2014
  • 본 연구에서는 Z-R 관계식의 매개변수를 안정적인 값으로 실시간 예측하고자 확장 칼만 필터기법을 적용하였다. 이를 위해 Z-R 관계식의 비선형을 고려하여 확장 칼만필터로 매개변수 결정모형을 구축하였다. 상태-공간모형은Adamowski and Muir (1989)의 연구를 기반으로 구축하였다. 상태-공간 모형의 상태변수는 Z-R 관계식의 두 매개변수로 설정하였다. 결과적으로 칼만이득과 상태변수가 발산하지 않는 안정적인 모형을 구축하였다. 주목할 점으로는 기존 방법으로 추정된 과대 혹은 과소한 매개변수가 필터링 되어 일부 제거되었다는 것이다. 부적절한 매개변수의 적용은 물리적으로 비현실적인 강우강도 추정 결과를 불러일으키는 원인이기 때문에 이러한 결과는 정량적 강수량 추정측면에서 효과가 크다고 할 수 있다. 또한 확장 칼만 필터로 예측한 매개변수로 레이더 강우를 추정한 결과, 편의보정계수가 1.0에 근사하게 나타나 편의보정과정 없이도 지상 강우강도와의 평균적인 차이는 근소한 것으로 나타났다. 또한 기존 방법으로 레이더 강우를 추정한 결과보다 전반적으로 정확도 높은 강우 추정이 가능한 것으로 나타났다.

피라미 개체군의 length-weight relationship 및 condition factor(K)를 이용한 공지천수계의 생태적 진단 (Ecological diagnosis of the Gongjicheon water system using length-weight relationship and condition factor(K) of population of the Zacco platypus)

  • 이광열;장하라;윤영진;박승철;김준철;이재용;최재석
    • 환경영향평가
    • /
    • 제23권2호
    • /
    • pp.137-149
    • /
    • 2014
  • The purpose of this study is to investigate the dynamics of the Zacco platypus population among streams in the Gongjicheon water system, Korea from December 2010 to October 2011. In this study, fish fauna was collected 27 Species belonged to 9 Families. The legal protection species, such as a natural monument and endangered species was not collected. Korean endemic species was collected 6 species including to Z. koreanus. The ratio of Korean endemic species was 22.6%, and it was lower than 51.3% that average of Korean endemic species in the Hangang water system. About these status, we considered that Gongjicheon water system had lost of the unique characteristics of the Hangang water system by the anthropogenic disturbances. The result of analysis to length-weight relationship and condition factor(K) of Z. platypus population in the Gongjicheon water system, the regression coefficient value(b) to indication of growth degree of the population was 3.04 and the slope of the condition factor(K) to indication of corpulency had positive value, respectively. These results seems to be that the Z. platypus population is maintained to a little unstably. In addition, the values of the degree of growth and corpulence were very low than the other natural streams in the Hangang water system, so it considered that the many artificially stress factors are occurred in this study area. These results are similar to Fish Assessment Index(FAI) in the assessment for health of aquatic ecosystem. Therefore, we are considered to require precise investigation and sustained monitoring for the restorations of stream ecosystem in the Gongjicheon water system.

비정질 $Al_2O_3$ 코아 재료를 이용한 Solenoid 형태의 고품질 RF chip 인덕터에 관한 연구 (A Study of High-Quality Factor Solenoid-Type RF Chip Inductor Utilizing Amorphous $Al_2O_3$ Core Material)

  • 이재욱;정영창;윤의중;홍철호
    • 대한전자공학회논문지SD
    • /
    • 제37권6호
    • /
    • pp.34-42
    • /
    • 2000
  • 우수한 성능을 가지며 소형${\cdot}$경량인 무선통신기기를 구현하기 위해서는 GHz 대의 고주파수에서 동작하는 소형 RF chip 인덕터의 개발은 중요한 연구분야가 되어왔다. 또한 최근 많이 사용되는 자성 ferrite core 재료는 300MHz 이상의 주파수영역에서 자화율이 급속하게 감소하여 고성능 RF chip 인덕터 개발에 큰 장애가 되고 있다. 따라서 본 논문에서는 비정질 $Al_2O_3$ 코아 재료를 응용한 단순 solenoid 형태의 소형${\cdot}$고성능 RF chip 인덕터를 연구하였다. Cu를 코일 (직경=40${\mu}m$)로 사용하였고 인덕터 크기는 $2.1mm{\times}1.5mm{\times}1.0mm$였다. 외부 전류원은 코일의 양단을 코아 가장자리에 적층된 Au 막에 본딩시킨 후 인가되었다. 코아의 성분은 EDX를 사용하여 분석하였다 개발된 인덕터의 인덕턴스 (L), quality factor (Q), 인피던스(Z)등의 주파수 특성은 RF impedance/Material Analyzer (HP16193A test fixture가 장착된 HP4291B)로 측정되었다. 인덕터들의 인덕턴스 값은 22 nH ~ 150 nH 범위를 가지며, 이들의 자기공진주파수 (SRF)는 1~3.5GHz 영역을 나타낸다. 또한 자기공진주파수가 증가함에 따라 인덕턴스 값이 감소하는 경향을 보이고 있다. 임피던스는 공진주파수에서 최대 값을 가지며 Q-factor의 값은 500 MHz ~ 1.5 GHz 주파수 범위에서 최대 70~97까지 얻어졌다.

  • PDF

최적의 luminescence 신호 분석을 위한 유전자 전달 방법의 비교연구 (Comparative studies of various transfection processes for the optimal luminescence signal analysis)

  • 박서현;이승호
    • 한국산학기술학회논문지
    • /
    • 제17권11호
    • /
    • pp.640-647
    • /
    • 2016
  • 형광 간섭 현상을 최소화시켜 상대적으로 민감한 측정이 가능한 aequorin기반 luminescence기술은 $G_{{\alpha}16}$ 단백질 도입을 통해 세포 내부의 칼슘 이동 신호를 감지하여 G 단백질 결합 수용체(G protein-coupled receptor, GPCR)의 기능 분석을 가능하게 하는 세포 기반 분석 기술로 수용체 및 G 단백질 유전자 전달의 최적화 과정이 필수적이다. 본 연구를 위해 corticotropin releasing factor receptor subtype 2(CRF2) 수용체를 모델 시스템으로 CRF2와 $G_{{\alpha}16}$ 단백질이 구축된 세 가지 안정화 세포주를 제작하였고, 이들을 이용한 서로 다른 세 가지 조건의 임시 발현 세포주에서 작용제(sauvagine)와 길항제(K41498)의 반응성을 분석하여 최적의 유전자 전달 방법을 도출하고자 하였다. 그 결과 sauvagine 및 K41498의 농도에 따른 반응에서 CRF2-$G_{{\alpha}16}$ 안정화 세포주가 임시 발현 세포주보다 10배 이상의 유효신호 비율을 나타내었고(z'=0.77) 임시 발현 세포주의 경우 $G_{{\alpha}16}$의 안정화 발현 이후에 CRF2를 전달하는 경우가 다른 임시 발현 조건보다 2배 이상 높은 효율을 보였다(z'=0.84). 따라서 임시 유전자 전달 기술을 GPCR 세포 기능 분석 시스템에 활용할 경우 $G_{{\alpha}16}$ 단백질에 대한 안정화 세포주를 우선적으로 구축하고, 목표하는 다양한 수용체들을 단계적으로 발현시키는 것이 최선의 방법이라 판단된다.

한국잔디류 기본종, 상업종 및 육종계통들의 생육속도 및 내한성 비교 (Comparison of Growth Rate and Cold Tolerance with Basic Species, Commercial Lines, and Breeding Lines of Zoysiagrass)

  • 최준수;양근모
    • 아시안잔디학회지
    • /
    • 제19권2호
    • /
    • pp.131-140
    • /
    • 2005
  • 본 연구는 한국잔디류 5개 기본종, 상업종, 품종, 육종계통을 포함한 잔디류에 대하여 내한성 및 생육속도를 조사한 것이다. 실험은 총 41종의 한국잔디류를 사용하여 경기북부지역과 중부지역에서 적응실험을 수행하였다. 조사는 내한성(겨울철 생존율), 늦가을 녹색률, 이른봄 녹색률, 밀도, 생육속도 등을 가시적으로 평가하였다. 경기북부(적성면) 내한성 시험에서는 41종의 잔디 중 Z. matrella, Z. tenuifolia, USm, S4M2의 4종($9.7\%$)이 동사하였으며 나머지 37($90.3\%$)종은 생존하였다. 또한 식재 1년 후 생육이 가장 왕성한 계통으로 Anyang1, Samdeock1, Anyang2, SJ21, Pyeongdong 등을 확인할 수 있었으며, 이들은 모두 Z. sinica와 Z. macrostachya의 유전적 특성을 갖고 있는 중엽형 잔디들이었다. 중부지역(천안)에서 월동 후 생존한 잔디는 29종($70.7\%$)으로 나타났고, 고사한 잔디는 12종($29.3\%$)으로 나타났다. 경기도 적성 지역에 비해 천안에서 고사잔디가 많았던 이유는 천안 실험이 용기 조건에서 수행된 것으로 동해와 더불어 건조 피해가 심했던 것으로 생각된다. 동해와 건조 피해에도 불구하고 생존율이 높았던 잔디로는 Anyang2, AJ9-7, Samdeock1, Samdeock2, Samdeock3, 그리고 Zenith-C 등 이었다. 반면에 적성지역에서 생육이 양호했던 SJ2-19, NSm, 88Mey, 88Mey-75, 88Mey-9S SJ21-10, ASm, DBm 등은 천안실험에서 고사한 것으로 보아 한국잔디류는 동해보다는 겨울철 건조에 의한 피해가 높은 것으로 생각된다.

ON π𝔉-EMBEDDED SUBGROUPS OF FINITE GROUPS

  • Guo, Wenbin;Yu, Haifeng;Zhang, Li
    • 대한수학회보
    • /
    • 제53권1호
    • /
    • pp.91-102
    • /
    • 2016
  • A chief factor H/K of G is called F-central in G provided $(H/K){\rtimes}(G/C_G(H/K)){\in}{\mathfrak{F}}$. A normal subgroup N of G is said to be ${\pi}{\mathfrak{F}}$-hypercentral in G if either N = 1 or $N{\neq}1$ and every chief factor of G below N of order divisible by at least one prime in ${\pi}$ is $\mathfrak{F}$-central in G. The symbol $Z_{{\pi}{\mathfrak{F}}}(G)$ denotes the ${\pi}{\mathfrak{F}}$-hypercentre of G, that is, the product of all the normal ${\pi}{\mathfrak{F}}$-hypercentral subgroups of G. We say that a subgroup H of G is ${\pi}{\mathfrak{F}}$-embedded in G if there exists a normal subgroup T of G such that HT is s-quasinormal in G and $(H{\cap}T)H_G/H_G{\leq}Z_{{\pi}{\mathfrak{F}}}(G/H_G)$, where $H_G$ is the maximal normal subgroup of G contained in H. In this paper, we use the ${\pi}{\mathfrak{F}}$-embedded subgroups to determine the structures of finite groups. In particular, we give some new characterizations of p-nilpotency and supersolvability of a group.

Alloy 690 전열관의 크리프 변형 및 파단 거동 (Creep Deformation and Rupture Behavior of Alloy 690 Tube)

  • 김우곤;김종민;김민철
    • 한국압력기기공학회 논문집
    • /
    • 제16권1호
    • /
    • pp.49-55
    • /
    • 2020
  • Creep rupture data for Alloy 690 steam generator tubes in a pressurized water reactor are essentially needed to demonstrate a severe accident scenario on thermally-induced tube failures caused by hot gases in a damaged reactor core. The rupture data were obtained using the tube specimens under different applied-stress levels at 650℃, 700℃, 750℃, 800℃, and 850℃. Important creep constants were proposed using various creep laws in terms of Norton power law, Monkman-Grant (M-G) relation, damage tolerance factor (λ), and Zener-Hollomon parameter (Z). In addition, a creep activation energy (Q) value for Alloy 690 tube was reasonably determined using experimental data. Creep behaviors such as creep strength, creep rates, rupture elongation showed the results of temperature dependence well. Modified M-G plot improved a correlation of the creep rate and rupture life. Damage tolerance factor for Alloy 690 tubes was found to be λ =2.20 in an average value. Creep activation energy for Alloy 690 tube was optimized for Q=350 (kJ/mol). A plot of Z parameter obeyed a good linearity, and the same creep mechanism was inferred to be operative in the present test conditions.

A New Single Phase Multilevel Inverter Topology with Two-step Voltage Boosting Capability

  • Roy, Tapas;Sadhu, Pradip Kumar;Dasgupta, Abhijit
    • Journal of Power Electronics
    • /
    • 제17권5호
    • /
    • pp.1173-1185
    • /
    • 2017
  • In this paper, a new single phase multilevel inverter topology with a single DC source is presented. The proposed topology is developed based on the concepts of the L-Z source inverter and the switched capacitor multilevel inverter. The input voltage to the proposed inverter is boosted by two steps: the first step by an impedance network and the second step by switched capacitor units. Compared to other existing topologies, the presented topology can produce a higher boosted multilevel output voltage while using a smaller number of components. In addition, it provides more flexibility to control boosting factor, size, cost and complexity of the inverter. The proposed inverter possesses all the advantages of the L-Z source inverter and the switched capacitor multilevel inverter like controlling the start-up inrush current and capacitor voltage balancing using a simple switching strategy. The operating principle and general expression for the different parameters of the proposed topology are presented in detail. A phase disposition pulse width modulation strategy has been developed to switch the inverter. The effectiveness of the topology is verified by extensive simulation and experimental studies on a 7-level inverter structure.

아파트 내부 공간 구성 요소에 의한 디자인 시스템에 관한 연구 (Study on the Design System based on the Interior Space Composition Factors of Apartment Housing)

  • 정재욱;윤미라
    • 한국실내디자인학회논문집
    • /
    • 제27호
    • /
    • pp.35-42
    • /
    • 2001
  • The main scope of this study is to define such system of space composition factor to diversify the interior space of the apartment housing. Staring from the space analysis, identification of the design factors, characters of the anthropometry for the dwelling behavior, and analyzed dimensions of the interior furniture from the market data have uniformly integrated to engage with such system for innovation and diversification of the space design method. The elements of the composition factors are as follows: 1. Structural elements - $\circled1$Bearing wall $\circled2$Ceiling $\circled3$Floor $\circled4$Structural column 2. furniture elements - $\circled1$Fixed furniture $\circled2$Movable furniture $\circled3$Non-bearing wall $\circled4$F1exible wall $\circled5$Void & Solid 3. Finished material elements - $\circled1$Structural material $\circled2$Doub1e shell $\circled3$Color & Tone $\circled4$Lighting system For the design system selected space in restricted in 3way directional axis X,Y,Z to form its volume and direction of the space composition factors. X-axis is stands for horizontal length of the factor, Y-axis is for the space depth, and lastly, Z-axis is for the hieghts of the space based on anthropometris.

  • PDF

비화학양론성 BSSNT 세라믹스의 마이크로파 유전 특성 (Microwave Dielectric Properties of Nonstoichiometric BSSNT Ceramics)

  • 박인길;이영희;류기원;배선기
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1994년도 추계학술대회 논문집 학회본부
    • /
    • pp.190-192
    • /
    • 1994
  • Microwave dielectric properties of $0.15(Ba_xSr_{0.05})O-0.15(Sm_{2(1-y)}Nd_{2y})O_3-0.7TiO_2$ ($x=0.9{\sim}1.0[mol.]$, y=6[m/0]) and $0.15(Ba_{0.95}Sr_{0.05})O-0.15(Sm_{2(1-y)}Nd_{2y})O_3-zTiO_2$(y=6[m/o], $z=0.66{\sim}0.7[mol.]$) ceramics were investigated with the contents of BaO and $TiO_2$. In the specimen with contents of BaO (0.975[mol.]), dielectric constant, quality factor and temperature coefficient of resonant frequency have good values of 76.52, 3001(at 3[GHz]), +0.71[ppm/$^{\circ}C$], respectively. In the specimen with contents of $TiO_2$(0.69[mol.]), dielectric constant, quality factor and temperature coefficient of resonant frequency showed the maximum values of 80.89, 3057(at 3[GHz]), +26.12[ppm/$^{\circ}C$], respectively.

  • PDF