• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.512-516
• /
• 2008

A new naked oat cultivar 'Choyang' (Avena sativa L.) was developed by the breeding team at the Department of Rice and Winter Cereal Crop, NICS, RDA in 2007. It was derived from a cross between 'Sikyonggwiri' and 'Gwiri23'. The cultivar, Sikyonggwiri is early heading while the breeding line Gwiri23 has a high yielding potential with large-size grain. Bulk method combined with pedigree selection program was employed in subsequent generations, and the promising line SO96025-B-303-44-2-5 was selected for agronomic performance in 2002. The line showed both high yield and good husking rate of seed in the Yield Trial tested at Suwon in 2003 to 2004, and was subsequently designated as 'Gwiri57'. Gwiri57 was evaluated for winter hardiness, earliness, and yield in four locations, Gimje, Iksan, Jeongeup and Jinju from 2005 to 2007 and was released as Choyang. Choyang headed 11 days earlier and matured 5 days earlier than the check cultivar 'Sunyang' in the paddy field condition. The new cultivar Choyang had 97 cm of culm length and 23.4 cm of spike length, 658 spikes per $m^2$, 75 grains per spike, 28.8 g of 1,000-grain weight, and 636 g of test weight. Choyang showed better winter hardiness than that of the check cultivar Sunyang, and similar seed quality to the check cultivar in respect to crude protein (12.9%) and ${\beta}$-glucan content (4.7%). However, it showed higher husking rate than the check cultivar. The grain yield of Choyang in the regional yield trial for 3 consecutive years was averaged $4.67MT\;ha^{-1}$, which was 38% higher than that of the check cultivar Sunyang. Choyang is recommended for the fall sowing cropping only in the southern area where daily minimum mean temperatures are averaged higher than $-4^{\circ}C$ in January, and is not recommended the in mountain area where frost damage is presumable.

• Korean Journal of Environment and Ecology
• /
• v.33 no.2
• /
• pp.187-201
• /
• 2019

This study examined the physicochemical water quality and evaluated the ecological health in 14 sites of Geum River (upstream, mid-stream, and downstream) using the fish community distribution and guilds and eight multi-variable matrices of FAI (Fish Assessment Index) during June 2008-May 2009. The analysis of the water quality variables showed no significant variation in the upstream and mid-stream but a sharp variation due to the accumulation of organic matter from the point where the treated water of Gap and Miho streams flew. The analysis of physicochemical water properties showed that BOD, COD, TN, TP, Cond, and Chl-a tended to increase while DO decreased to cause eutrophication and algae development from the downstream where Miho and Gap stream merged. The analysis of fish community showed that the species richness index and species diversity index increased in the mid-stream area but decreased in the downstream area, indicating the stable ecosystem in the upper stream and the relatively unstable ecosystem in the downstream. The analysis of the species distribution showed that the dominant species were Zacco platypus that accounted for 20.9% of all fish species and Zacco koreanus that accounted for 13.1%. The analysis of the fish tolerance and feeding guild characteristics showed that the sensitive species, the insectivore species, and the aquatic species were dominant in the mid-stream point. On the other hand, contaminants from the sewage water treatment plant of Miho stream had a profound effect in the downstream to show the dominance of tolerant species, omnivorous species, and lentic species. Therefore, it is necessary to improve water quality by reducing the load of urban pollutants and to pay attention to the conservation and restoration of aquatic ecosystems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.93-99
• /
• 2019

The purpose of this study was to investigate the bond strength between PEKK(Polyetherketoneketone) and Sinfony(3M ESPE, Seefeld, Germany) the dental composite resin by proposing the three representative surface treatment methods and evaluate to see if they affect the bond strength between two materials. A total of 30 PEKK($Pekkton^{(R)}$ Ivory, $Cendres+M{\acute{e}}taux$, Bienne, Switzerland) specimens were prepared, embedded in acrylic resin, polished(P 1200 grid) to surface, and each group was divided into 10 specimens. After then, by the surface treatment method, it classified into three groups(n=10) such as Air abrasion group(PN), applying Single Bond Universal(3M ESPE) after Air abrasion(PB), applying OPAQUE(3M ESPE) after Air abrasion(PO). Then, veneering was performed by using Sinfony(3M ESPE, Seefeld, Germany). All completed specimens were allowed to rest in a $37^{\circ}C$ water bath for 24 hours. Shear bond strength of each group was measured and fracture patterns were classified. Statistic analysis was performed with One-way ANOVA followed by post hoc Scheffe tast (p<.05). Statistical analysis was performed using the SPSSWIN 21.0 program. As a result of one-way ANOVA, the average value of PB group was $27.67{\pm}4,18MPa$ and it was shown as the highest bond strength, PN and PO were $20.43{\pm}1.70$ and $19.8{\pm}4.77MPa$ each, and these were relatively low(F=18.4, P<.001), and as the post-test the Scheffe test was conducted and verified (p<.05). After examining the scheffe test, it was showed significant differences as PB>PO, PB>PN(p<.001). Through this study, in order to enhance the bonding force between PEKK and the composite resin, perform the Air abrasion and surface treatment by using Single Bond Universal(3M ESPE) is recommended, and as coMPared with other studies. And it is assumed that the increase of the application time of the Air abrasion affects the increase of the shear bond strength. Thus, further research is required.

• Korean Journal of Environment and Ecology
• /
• v.33 no.1
• /
• pp.28-51
• /
• 2019

The purpose of this study was to analyze forest vegetation structure in Marugeum (the ridge line) area between Dakmokryeong and Daetjae in Baekdudaegan through vegetation classification, importance value, species diversity, and CCA using the data that were collected from 245 quadrates through Braun-Blanquet vegetation survey method from May to September in 2017. The results of the forest vegetation classification identified 8 vegetation units with Quercus mongolica community group at the highest level. Q. mongolica community group was classified into the Cornus controversa community, Buxus koreana community, Sasa borealis community, Abies nephrolepis community, and Q. mongolica typical community. C. controversa community was further classified into Quercus dentata group, Filipendula glaberrima group, Larix kaempferi group, and C. controversa typical group. The result of the important value analysis showed that Q. dentata had the highest importance value at 19.1% in vegetation unit 1 while Q. mongolica had the highest importance value at 22.7%, 38.3%, 25.6%, 41.3%, 27.9%, and 41.6% in vegetation unit 2, 4, 5, 6, 7, and 8, respectively, and L. kaempferi had the highest importance value at 27.6% in vegetation unit 3. As such, Q. mongolica species generally represented the communities of Marugeum (the ridge line) area of Dakmokryeong to Daetjae in Baekdudaegan. The results of species diversity showed that vegetation unit 1 and 2 were 3.305 and 3.236, respectively, which were relatively higher than other vegetation units. It was considered that this result was due to the influence of high emergence of present species. The results of the CCA analysis of the correlations between biotic environmental factors and vegetation types showed that vegetation unit 1 was mainly correlated with the megaphanerophyte ratio and vine plant ratio. In the correlations between abiotic environmental factors and vegetation types, vegetation unit 7 was significantly correlated with altitude. From the perspective of ecological management, vegetation unit 5 represented by B. koreana community was inhabited by a variety of plants due to the species composition and location environment due to the geological characteristics that are typical of limestone area. Vegetation unit 7 represented by A. nephrolepis community was typified as subalpine vegetation widely distributed by relict species and endemic species. We concluded that it is necessary to manage these vegetation units with an ecologically differentiated approach.

• Journal of Food Hygiene and Safety
• /
• v.33 no.6
• /
• pp.466-473
• /
• 2018

An analytical method of sodium polyacrylate in processed food products was developed and monitored by using size-exclusion chromatography. GF-7M HQ column and UV/VIS detector were selected based on peak shape and linearity. Flow rate, column oven temperature, and mobile phase were selected as 0.6 mL/min, $45^{\circ}C$, and 50 mM sodium phosphate buffer of pH 9.0, respectively. Samples for analysis of sodium polyacrylate were extracted with 50 mM sodium phosphate buffer of pH 7.0 for 3 hr at $20^{\circ}C$ and 150 rpm. Analytical method validation revealed proper selectivity and calibration curve was selected in the range of 50-500 mg/L, and correlation coefficient of calibration curve was more than 0.9985. Limit of detection of sodium polyacrylate was 10.95 mg/kg and limit of quantification was 33.19 mg/kg. Accuracy and coefficient of variation for sodium polyacrylate analysis was 99.6-127.6%, 3.0-8.3% for intra-day and 94.3-121.9%, 1.3-2.6% for inter-day, respectively. Sodium polyacrylate was detected in 40 samples among monitored 125 processed food products. Detected contents were less than 0.2%, limited by the Food Additives Code. Results suggest the established size-exclusion chromatography method could be used to analyze sodium polyacrylate in processed food products.

• The Journal of the Korea Contents Association
• /
• v.19 no.6
• /
• pp.620-631
• /
• 2019

Be an important competitive appearance for both boys and girls in modern society, and highlight the importance of enhancing their appearance. Administrative activity is considered traditionally feminine behavior and appearance, almost all female is subject of a consumer market is continuing, and recognition, but since the 1990s.Gender role stereotypes and women's social activity due to changes in status and role of men and women affected. Accordingly, the men in the realm of women than it used to be a glass half full and inclusive attitude began to improve her appearance are also men, and well in yourself. Investing a lot of time and money to their appearance to describe behavior. Furthermore, workers men to appearance factor for the career achievement, such as promotion or salary competitiveness is gradually spreading awareness of social life on whose behalf the men. The halo effect for a positive image formation and desirable looks to be. A Study on the self-wor Second, the higher the self-esteem of psychologically stable social approval of the important aesthetic of clothing, is less dependent on increased manageability and clothing. The study by analysis of the self respect persimmon and appearance for his own body satisfaction and a high correlation study and OK. Interpersonal and that a significant impact on the formation.Be an important competitive appearance for both boys and girls in modern society, and highlight the importance of enhancing their appearance. Administrative activity is considered traditionally feminine behavior and appearance, almost all female is subject of a consumer market is continuing, and recognition, but since the 1990s.Gender role stereotypes and women's social activity due to changes in status and role of men and women affected. Accordingly, the men in the realm of women than it used to be a glass half full and inclusive attitude began to improve her appearance are also men, and well in yourself. Investing a lot of time and money to their appearance to describe behavior. Furthermore, workers men to appearance factor for the career achievement, such as promotion or salary competitiveness is gradually spreading awareness of social life on whose behalf the men. The halo effect for a positive image formation and desirable looks to be. A Study on the self-wor Second, the higher the self-esteem of psychologically stable social approval of the important aesthetic of clothing, is less dependent on increased manageability and clothing. The study by analysis of the self respect persimmon and appearance for his own body satisfaction and a high correlation study and OK. Interpersonal and that a significant impact on the formation.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.3
• /
• pp.24-41
• /
• 2014

Since the celadons excavated from the Son-gok 2-ri 4th kiln site are located in the Beopcheon temple site and at close range, the similarity to the celadons excavated from the Beopcheon temple site is being raised. Thus, this study examined the correlation using a natural-scientific method. In this study, historical ceramic properties of total 19 celadons were examined and they were scientifically analyzed. First of all, according to the scientific analysis, chemical compositions of celadon clay showed a dispersed distribution at RO2 3.79-7.77mole and RO+R2O 0.33-0.49mole. When the microstructure was analyzed, most celadons excavated from the Beopcheon temple site, Wonju, which are estimated to be used in real life, had a favorable state, and some celadons from the Son-gok 2-ri 4th kiln site were found not to be glazed and sintered properly. When analyzing body crystalline phases of the celadons using the XRD method, quartz and mullite were extracted from all of the samples. And corundum was extracted from sg4 sample. Though firing temperature of each sample was different, they were mostly fired to temperatures between 1150 and $1200^{\circ}C$ and some of them experienced a low temperature of $1100^{\circ}C$ or a high temperature above $1200^{\circ}C$. Various chemical compositions and producing techniques were observed in the celadons from the Beopcheon temple site and Son-gok 2-ri 4th kiln site and it is hard to assure that the Son-gok 2-ri 4th kiln site was the production kiln site of the celadons used in the Beopcheon temple site. But according to the analysis of rare earth elements, some of the celadons from the Beopcheon temple site and Son-gok 2-ri 4th kiln site displayed a distribution pattern with certain regularity and this implies there is a possibility that the raw materials used in producing the ceramics might have come from the same origin. From the perspective of ceramic history, the celadons excavated from the Beopcheon temple site and Son-gok 2-ri 4th kiln site were produced using the same molding and sintering technique. Also, it is estimated that they were produced in the 12th or 13th century, judging from the overall shapes and patterns of the celadons.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.4
• /
• pp.224-243
• /
• 2014

This study examined the materials and casting technology(cast, alloy, etc.) used in the manufacturing of bronze artifacts based on old literature such as Yongjae Chonghwa, Cheongong Geamul, and The Korea Review. In the casting experiment for restoration of Sangpyong Tongbo, a bronze and brass mother coin mold was made using the sand mold casting method described in The Korea Review. The cast was comprised of the original mold plate frame, wooden frame, and molding sand. Depending on the material of the outer frame, which contains the molding sand, the original mold plate frame can be either a wooden frame or steel frame. For the molding sand, light yellow-colored sand of the Jeonbuk Iri region was used. Next, the composition of the mother alloy used in the restoration of Sangpyong Tongbo was studied. In consideration of the evaporation of tin and lead during actual restoration, the composition of Cu 60%, Zn 30%, and Pb 10% for brass as stated in The Korea Review was modified to Cu 60%, Zn 35%, and Pb 15%. For bronze, based on the composition of Cu 80%, Sn 6%, and Pb 14% used for Haedong Tongbo, the composition was set as Cu 80%, Sn 11%, and Pb 19%. The mother coin mold was restored by first creating a wooden father coin, making a cast from the wooden frame and basic steel frame, alloying, casting, and making a mother coin. Component analysis was conducted on the mother alloy of the restored Sangpyong Tongbo, and its primary and secondary casts. The bronze mother alloy saw a 5% increase in copper and 4% reduction in lead. The brass parent alloy had a 5% increase in copper, but a 4% and 12% decrease in lead and tin respectively. Analysis of the primary and secondary mother coin molds using an energy dispersive spectrometer showed that the bronze mother coin mold had a reduced amount of lead, while the brass mother coin mold had less tin. This can be explained by the evaporation of lead and tin in the melting of the primary mother coin mold. In addition, the ${\alpha}$-phase and lead particles were found in the mother alloy of bronze and brass, as well as the microstructure of the primary and secondary coin molds. Impurities such as Al and Si were observed only in the brass mother coin mold.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.4
• /
• pp.198-221
• /
• 2017

The Jjoksaem site is the eastern sector of Daereungwon Ancient Tomb Complex, Gyeongju(the 512th Historic site) called Wolseong North Burial Ground in academic community. The excavation and research of this site was conducted from 2007 to 2015, with the purpose of basic data offering for the restoration of Silla tumuli and development of ancient tomb park. As a result of the investigation, more than 700 new tombs were discovered except the 155 tumuli founded in the Japanese colonial era. Moreover, more than 70 percent of the smaller tombs, such as outer coffin tombs, were discovered here. There are four characteristics of outer coffin tombs in Jjoksaem site. First, it is recognized the Gyeongju-styled outer coffin tombs have a long rectangular shape, distinct from Gimhae-styled outer coffin tombs in a rectangular shape. Second, they are divided into three groups by the size of the grave area. This is indirectly related to the rank and the status of the buried person. Third, these tombs began to be constructed at the end of the 3rd century before the time of wooden chamber tombs covered by stone and earthen mound. They were ruined because of the new tombs constructed at the period of Maripgan. This reflects that the identity of the former tombs was not respected by the communities in the later generations. Outer coffin tombs were consistently made to the end of the era of wooden chamber tombs covered by stone and earthen mound. Lastly, the area of burial ground of outer coffin tombs is limited by wooden chamber tombs covered by stone and wooden mounds. Otherwise, the location of the burial ground for the deceased is limited by the status of the deceased. The idea that wooden chamber tombs covered by stone and earthen mound are located on the above ground turns out to be incorrect. In Jjoksaem site, there is little difference between the height of the circular burial protection stone and the height of the digging lines of the other tombs. In the case of No.44 tumulus, the lowest step of the circular burial protection stones is lower than those of the other tombs and tumuli. Research of outer coffin tombs at Jjoksaem site will be to suggest important academic data about the changing period from Saroguk, as the head of chiefdom union, to Silla, as state.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.2
• /
• pp.61-67
• /
• 2019

This study was conducted to investigate the effect of supplementary feeding levels on livestck and forage productivity and grazing intensity in Elk stags (Cervus canadensis). A fifteen 2-year-old Elk stags about 195 kg were randomly assigned to one of three dietary treatments (five animals per treatment). The dietary treatments consisted of a feeding concentrate of 1.0% of body weight (T1), 1.5% of body weight (T2) and 2.0% of body weight. Total dry matter intake (TDMI) was increased with increased with an increasing supplementary feeding levels. Average daily gain (ADG) were significantly increased with an increasing supplementary feeding levels (p<0.05) and reached a maximum on July and was lower in spring than autumn. The velvet antler production was no differences among treatment groups. Forage productivity of pasture and crude protein content were highest on May and decreased thereafter, however, crude fiber content was the reversed. The grazing intensity of Elk stags was increased in spring (38 to 59 head per ha) than summer and autumn (13 to 32 head per ha). The average grazing intensity of Elk stags ranged from 21 to 34 head per ha, which is affected by supplementary feeding levels. This result suggests that feeding supplementary diet at 1.5 % of body weight was needed to maintain the stable wight gain in antler growing periods and control the proper grazing intensity of Elk deer stags.