• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.10
• /
• pp.3-12
• /
• 2018

This research aims at analyzing the changes in residential environment after a residential environment improvement project focusing on the analysis into the physical environment of a residential environment improvement project, and examining in what direction the changes by residents' own efforts occurred after public support, such as infrastructure. The present residence development method has become different from the previous pulling down method and is focused on regeneration. By examining in what direction the target residence is being changed because of the development by residents' own efforts after the government's public investment at this time, this study also aims at investigating the direction to develop a guideline for residential improvement for later improvement of deteriorated residence. As for the contents of the analysis, changes in public support, such as infrastructure, and other areas after the residential environment improvement project were compared and analyzed from the land use, street system, and condition of buildings before the residential environment improvement project through field survey, geographic information system(GIS), registered land and building data and so on. The biggest change since the support from the government was that at the beginning of the project, the application of special provision of building laws and different financial supports led to lots of newly built buildings. Since then, their number has decreased rapidly, and in most cases, there have been some changes in part, such as changes in the use of land or repair of disposal tanks. Most newly built buildings were multi-household houses, and it has caused road capacity and parking lot capacity, etc., to be exceeded, which has worsened the pleasantness of the living environment. In addition, other problems have also appeared, for example, the lack of residence supporting facilities yet with a higher level of residential density. Regarding the changes in the residential environment after the residential environment improvement project, maintenance of houses were conducted in some degree as diverse alleviation policies to improve poor residence, yet the absence of the guideline for the direction of developing the whole district has made the residence environment more dense and deteriorated. To solve these problems, in advance to a residential improvement project, specific management methods based on short-, mid- and long-term plans for the direction of development by residents' own efforts and a sustainable guideline seem to be necessary.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.12
• /
• pp.65-76
• /
• 2018

Due to the rapid demographic and structural changes, Korea has faced a variety of social issues and quickly entered the aged society since the 2000s. In order deal with this reality, diverse types of welfare policies are emerging in the society as a whole. The government began to supply domestic public silver housing in 2016 to provide against the quickly growing aged society and now, the government is planning to supply approximately 50,000 housing by 2022 for quantitative growth of aged society, by selecting 1st and 2nd designated areas for the project additionally. This public retirement(silver) housing combines 'space' with 'service'. The lower floors are a public silver welfare Facilities and the upper floors are a housing spaces. This type of housing is to deal with requirements of rental housing residents by combining physical space with supporting service. Based on barrier-free design, the complex and unit house have safety handles and alarm bells in the bathroom, undulating washstands, bathroom sliding doors, corridor safety handles, and emergency safety exit lamps in each housing unit so the aged and the disabled can use easily and conveniently. Also, hand rails are installed and stepped pulleys are removed to promote convenience. Currently, the government is planning to increase the supply, focusing on low-income groups, such as beneficiaries of national basic livelihood and the working poor. Recognizing that the public retirement(silver) housing project is at its early stage, this study examined satisfaction, based on evaluations of real residents. This study aimed to obtain more empirical research data and apply them to public retirement(silver) house space analysis. For analysis, this study targeted Wirye public retirement(silver) housing and Magnolia public retirement(silver) housing that are in operation, and literature review, previous research review, and field survey were conducted to examine the present state. Using the questionnaires consisting of four large classification items; Block Layout, Housing Unit, Welfare Facilities, and Barrier-free Design, and sub-details, a survey was conducted to analyze residents' satisfaction. In conclusion, it is anticipated that this study would serve as basic research data about public retirement(silver) housing to increase continuously in future by analyzing public retirement(silver) housing spaces, on the basis of the analyzed data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.1-8
• /
• 2021

This study developed low-cost and high-efficiency pavement condition monitoring technology to produce the key information required for pavement management. A noise and artificial intelligence-based monitoring system was devised to compensate for the shortcomings of existing high-end equipment that relies on visual information and high-end sensors. From idea establishment to system development, functional definition, information flow, architecture design, and finally, on-site field evaluations were carried out. As a result, confidence in the high level of artificial intelligence evaluation was secured. In addition, hardware and software elements and well-organized guidelines on system utilization were developed. The on-site evaluation process confirmed that non-experts could easily and quickly investigate and visualized the data. The evaluation results could support the management works of road managers. Furthermore, it could improve the completeness of the technologies, such as prior discriminating techniques for external conditions that are not considered in AI learning, system simplification, and variable speed response techniques. This paper presents a new paradigm for pavement monitoring technology that has lasted since the 1960s.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.454-460
• /
• 2020

The goal of this study was to classify the area of Larix kaempferi forest available for timber production, considering the legal, physical, environmental, and technical constraints, and to optimize the forest resources and the potential of timber production in South Korea for 50 years. The results showed that the area of Larix kaempferi forest available for timber production is limited to 124,000 ha, 48% of the total area. Without further efforts in resource management, sustainable timber production of Larix kaempferi cannot be guaranteed even at the current level of timber supply. To enhance the potential of timber production for this species, two alternatives were considered: a 705-km annual increment of forest roads (alternative 1) and a 1,000-kmannual increment of forest roads (alternative 2) to enlarge forest areas available for timber production. The results showed that alternative 1 is feasiblefor sustainable timber production both at the current level and with a 5% increment of timber supply. However, alternative 1 is not sufficient in the case of a 10% increment of timber supply with a low growing stock, whereas alternative 2 is sufficient. Therefore, an increase in forests roads as well as regeneration efforts are required to improve the timber production potential of Larix kaempferi in South Korea.

• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.476-482
• /
• 2011

As part of studies on the reduction of forest trails degradation caused by high users density, this study was carried out to investigate soil physical properties of forest trails of Gyeongnam Domain in Mt. Jiri, Southeast Korea. Since the forest were opened for leisure trailing in 2008, the average soil erosion amounts per a square meter on the forest trails were $0.0015m^3$ from Inweol to Gumgeo, $0.0018m^3$ from Dongang to Suchol, and $0.0027m^3$ from Suchol to Chungam for 3 years. But, from Chungam to Agyang, the erosion was almost not occurred because it was recently opened. The soil hardness in 5 cm depth was significantly higher than in 10 cm depth. It indicates that intensive soil compaction by users has mainly affected in 5 cm soil depth until now on. In three forest trails compacted intensively, the porosity of 0-7.5 cm soil layer was down to 1.4-1.5 times compared to that in 2008. In additions, the bulk density was up to 1.6-3.1 times compared to the controls, which were not opened to users. As a result, the degradation caused by high users density would keep occurring on the three forest trails unless any counterplans are considered for the degradation reduction. At the moment, users distribution to other forest trails and long-term sabbatical years would be the most effective counterplans to keep from users gravitation on the three forest trails.

• Applied Chemistry for Engineering
• /
• v.22 no.2
• /
• pp.173-177
• /
• 2011

In this study, the formation of $AlPO_4$-type porous materials from alum sludge was investigated. The materials were synthesized by the reaction of aluminum hydroxide and phosphoric acid with an organic template. Cationic surfactant, natural humic acid, and amino acids were used for the organic template. The residual organic templates were removed by calcination at $600^{\circ}C$ in the air. Powder X-ray diffraction patterns showed the charicteristic patterns of the $AlPO_4$-type porous materials. The morphology of the material was examined using a scanning electron microscopy. The coordination environment of $Al^{3+}$ ion was investigated by $^{27}Al$ MAS NMR technique. Both tetrahedrally and octahedrally coordinated$Al^{3+}$ ions were found in the as-synthesized samples while all $Al^{3+}$ ions were tetrahedrally coordinated in the calcined products. The development of mesopore in the solid material was confirmed by the measurement of BET specific surface area. Finally, they were used for removal of toxic formaldehyde from the air and the formaldehyde molecules were adsorbed on the surface of pores. In conclusion, $AlPO_4$-type porous materials from alum sludge might be applicable in the removal of toxic volatile organic compounds from the air.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.4
• /
• pp.340-348
• /
• 2021

Continuous monitoring of RGB (Red, Green, Blue) vegetation indices is important to apply remote sensing technology for the estimation of crop growth. In this study, we evaluated the performance of eight vegetation indices derived from soybean RGB images with various agronomic parameters under drought stress condition. Drought stress influenced the behavior of various RGB vegetation indices related soybean canopy architecture and leaf color. In particular, reported vegetation indices such as ExGR (Excessive green index minus excess red index), Ipca (Principal Component Analysis Index), NGRDI (Normalized Green Red Difference Index), VARI (Visible Atmospherically Resistance Index), SAVI (Soil Adjusted Vegetation Index) were effective tools in obtaining canopy coverage and leaf chlorophyll content in soybean field. In addition, the RGB vegetation indices related to leaf color responded more sensitively to drought stress than those related to canopy coverage. The PLS-DA (Partial Squares-Discriminant Analysis) results showed that the separation of RGB vegetation indices was distinct by drought stress. The results, yet preliminary, display the potential of applying vegetation indices based on RGB images as a tool for monitoring crop environmental stress.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.7
• /
• pp.1071-1077
• /
• 2022

A security SoC that can be used to implement elliptic curve cryptography (ECC) based public-key infrastructures was designed. The security SoC has an architecture in which a hardware accelerator for the elliptic curve digital signature algorithm (ECDSA) is interfaced with the Cortex-A53 CPU using the AXI4-Lite bus. The ECDSA hardware accelerator, which consists of a high-performance ECC processor, a SHA3 hash core, a true random number generator (TRNG), a modular multiplier, BRAM, and control FSM, was designed to perform the high-performance computation of ECDSA signature generation and signature verification with minimal CPU control. The security SoC was implemented in the Zynq UltraScale+ MPSoC device to perform hardware-software co-verification, and it was evaluated that the ECDSA signature generation or signature verification can be achieved about 1,000 times per second at a clock frequency of 150 MHz. The ECDSA hardware accelerator was implemented using hardware resources of 74,630 LUTs, 23,356 flip-flops, 32kb BRAM, and 36 DSP blocks.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.14-22
• /
• 2022

In this study, a fire test was conducted to evaluate the fire performance of precast concrete (PC) slabs in an outdoor environment in response to the increase in fire incidents caused by the growth of warehouses. Prior to the field fire test, the tensile yield strength of the tendon at elevated temperatures was tested to analyze the mechanical properties. Also, by referring to previous studies, the thermal properties of tendon and the mechanical and thermal properties of concrete were investigated. A field fire test was conducted to analyze the structural and fire performance of two identical slabs with 50 and 150 mm bearing length. As the bearing length increased, deflection and horizontal displacement decreased. The fire test lasted for 200 minutes without the collapse of slabs, validating current codes. Based on the structural performance which maintained even with concrete spalling and rupture of some tendons, the bonded method is assumed to be practical in pre-tensioned PC slabs. The results of fire test are expected to be utilized in evaluating the fire performance of PC slabs in warehouses.

• Tunnel and Underground Space
• /
• v.32 no.5
• /
• pp.298-311
• /
• 2022

Some problems, such as aging workers, a decreased population due to a low birth rate, and shortage of skilled workers, are rising in construction sites. Therefore research for smart construction technology that can be improved for productivity, safety, and quality has been recently developed with government support by replacing traditional construction technology with advanced digital technology. In particular, the motor grader that mainly performs road surface flattening is a construction machine that requires the application of automation technology for repetitive construction. It is predicted that the construction period will be shortened if the construction automation technology such as trajectory tracking, automation work, and remote control technology is applied. In this study, we introduce the hardware and software architecture of the smart motor grader to apply unmanned and automation technology and then analyze the traditional earthwork method of the motor grader. We suggested the application plans for the path pattern and blade control method of the smart motor grader based on this. In addition, we verified the performance of waypoint-based path-following depending on scenarios and the blade control's performance through tests.