• Microbiology and Biotechnology Letters
• /
• v.48 no.3
• /
• pp.267-275
• /
• 2020

Anthocyanins are antioxidant compounds susceptible to environmental factors. Anthocyanin encapsulation into yeast cells is a viable solution to overcome this problem. In this study, the optimal factors for anthocyanin encapsulation were investigated, including anthocyanin concentration, plasmolysis contraction agent, and ethanol concentration, and response surface methodology was evaluated, for the first time. Anthocyanin from Hibiscus sabdariffa L. flowers was encapsulated into Saccharomyces cerevisiae using plasmolysis contraction agent (B: 3%-20% w/v), ethanol concentration (C: 3%-20% v/v), and anthocyanin concentration (A: 0.15-0.45 g/ml). The encapsulation yield and anthocyanin loss rate were determined using a spectrometer (520 nm), and color stability evaluation of the capsules was performed at 80℃ for 30 min. The results of the study showed that these factors have a significant impact on the encapsulation of anthocyanin, in which ethanol agents have the highest encapsulation yield compared to other factors in the study. Statistical analysis shows that the independent variables (A, B, C), their squares (A², B², C²), and the interaction between B and C have a significant effect on the encapsulation yield. The optimized factors were anthocyanin, 0.25 g/ml; NaCl, 9.5% (w/v); and ethanol, 11% (v/v) with an encapsulation yield of 36.56% ± 0.55% and anthocyanin loss rate of 15.15% ± 0.98%; This is consistent with the expected encapsulation yield of 35.46% and loss rate of 13.2%.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.5
• /
• pp.600-612
• /
• 2015

We investigated the optimization of the organosolv pretreatment of yellow poplar for bioethanol production. Response surface methodology was used to determine the optimal conditions of three independent variables (reaction temperature, reaction time, and sulfuric acid (SA) concentration). Reaction temperature is the most significant variable in the degradation of xylan and lignin in the presence of an acid catalyst, and ethanol production increased with a decrease in the lignin content. The highest ethanol concentration ($42.80g/{\ell}$) and theoretical ethanol yield (98.76%) were obtained at $152^{\circ}C$ (2.5 bar) with 1.6% SA for 16 min. However, because of excessive degradation of the raw material, the overall ethanol yield was less than under other pretreatment conditions which has approximately 50% of WIS recovery rate after pretreatment. The optimal conditions for the maximum overall ethanol yield ($146^{\circ}C$ with 1.22% SA for 15.9 min) were determined with a predicted yield of 17.11%, and the experimental values were very close (17.15%). Therefore, the quadratic model is reliable.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.349-352
• /
• 1998

In many circumstances, it is infeasible to simulate the daily water yield in every land use or soil type of the watershed or river basin. These situations can be simulated in“Soil and Water Assessment Tool”(SWAT) using a concept called“hydrologic response units”(HRU's) within a topographically-defined subbasin. Soil water balance, crop growth, nutrient cycling management, etc., are simulated for each HRU For the watershed of Bok-ha river, the effect of HRU's in SWAT has been studied in respect to water yield. The optimum number of HRU's was 23 based in data capacity and correlation coefficient.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.347-357
• /
• 2018

Steady shear response of a magnetorheological fluid (MRF) system containing porous mono-disperse magnetite ($Fe_3O_4$) spheres synthesized by solvothermal method is demonstrated. In applied magnetic field the interaction between the spherical particles leads to form strong columnar structures enhancing the yield strength and viscosity of the MRFs. The yield strengths of the MRFs also scale up with the concentration of magnetic particles in the fluid. Considering magnetic dipolar interaction between the particles the magneto-mechanical response of the MRFs is explained. Unlike metallic iron particles, the low-density corrosion resistant soft-ferrimagnetic $Fe_3O_4$ spherical particles make our studied MRF system efficient and reliable for shock-mitigation/vibration-isolation applications.

• Food Science and Biotechnology
• /
• v.17 no.2
• /
• pp.379-383
• /
• 2008

Extraction characteristics of garlic and functional properties of corresponding extract were monitored by response surface methodology (RSM). Maximum extraction yield of 26.41% was obtained at microwave power of 146.29 W, ethanol concentration of 63.31 %, and extraction time of 5.88 min. At microwave power, ethanol concentration, and extraction time of 114.84 W, 58.83%, and 1.42 min, respectively, maximum electron-donating ability (EDA) was 72.86%. Maximum nitrite-scavenging ability was 94.62% at microwave power, ethanol concentration, and extraction time of 81.83 W, 2.65%, and 3.83 min, respectively. Superoxide dismutase (SOD) showed maximum pseudo-activity of 49.12% at microwave power of 34.23 W, ethanol concentration of 33.11 %, and extraction time of 4.40 min. Based on superimposition of 4-dimensional RSM with respect to extraction yield, electron-donating ability, nitrite-scavenging ability, and pseudo-activity of SOD, optimum ranges of extraction conditions were microwave power of 0-100 W, ethanol concentration of 40-70%, and extraction time of 2-8 min.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.1
• /
• pp.225-228
• /
• 2004

Optimization of fluidized bed granulating conditions for yield, bulk density, and tapped density of powdered milk was determined using response surface methodology. Yield of powdered milk was greatly affected by feeding rate of water, and bulk density and tapped density could be reduced by decreasing of atomization pressure. The optimum conditions for fluidized bed granulating of powdered milk were predicted with 6$0^{\circ}C$ of inlet air temperature, 16 mL/min of feeding rate, and 2.1 bar of atomization pressure. Also 94% of yield 0.350 g/㎤ of bulk density, and 0.446 g/㎤ of tapped density of powdered milk could be obtained by the optimum granulating conditions.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.43 no.3
• /
• pp.177-182
• /
• 2023

Iron (Fe) is a vital element for plants and other organisms, involving in several physiological processes including respiration, chlorophyll biosynthesis, and photosynthesis. Unfortunately, how Fe accumulation regulates in response to light quality has not been well established in plants. Therefore, the aim of the study was to explore the mechanism of Fe homeostasis by light quality. In this study, we found morpho-physiological attributes were significantly improved in response to blue (λmax: 450) compared to white (λmax: 500) and red (λmax: 660) light. The root-shoot length, plant biomass, photosynthesis efficiency (Fv/Fm) and leafgreen (SPAD) significantly declined in response to white and red light. However, these parameters were improved and iron deficiency was substantially alleviated by blue light exposure in alfalfa seedlings. This study might be useful to the forage breeders and farmers for improving alfalfa yield and nutritional benefits.

• Journal of Life Science
• /
• v.20 no.11
• /
• pp.1691-1696
• /
• 2010

Neohesperidin is a natural new nutrition sweetener, widely existing in plants of dry citrus peel, which can be derived from extraction. Since the sweetness is 1,300-1,500 times greater than that of sugar, neohesperidin are widely used in fruit juices, wines, beverages, bakeries and pharmaceutical formulations, and are particularly suitable for consumption by diabetic patients. However, the yield of extraction from citrus peel waste is very low. In this study optimal yield conditions were determinedusing response surface methodology (RSM) in order to increase the neohesperidin extraction yield. The critical factors for maximum extraction yield were selected extraction pressure ($x_1$), extraction time ($x_2$), and concentration of ethanol ($x_3$). As a result, the extraction yield was improved when the extracting pressure increased. The extraction yield also increased in a time-dependent manner. When adding ethanol as an assistance solvent to the supercritical carbon dioxide, extraction yield was increased as more ethanol concentration was added. Finally, the extraction yield of neohesperidin was improved to about 162.22% compared to ethanol extraction as a conventional method.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2003.05a
• /
• pp.55-55
• /
• 2003

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.6
• /
• pp.806-812
• /
• 2003

Attempts have been made to establish relationship between the response to ACTH challenge in female calves, growth and first lactation performance. A total of 19 Holstein calves weighing 100 kg i. v. were given 0.50 IU of ACTH/kg $BW^{.75}$ (EXACTHIN inj., Richter G., Budapest) at 60 days of age. Serial blood samples were taken at times 0, 0.5, 1, 2, 3, 4 and 5 hours and analyzed for cortisol, glucose insulin and FFA levels. From challenge series the area under the curve from time of administration and the following 5 h were calculated. Negative, and mostly loose relationship between response to ACTH challenge for cortisol, insulin, or FFA and ADWG during growth have been established (p>0.05) with positive one for glucose. Bivariate coefficients of correlation varied within the range from -0.35 to 0.15. Estimations reveal negative correlation between the length of first lactation and cortisol or insulin (r=-0.80, p<0.001 and r=-0.45, p<0.10, resp.) Close association between cortisol or insulin and actual first lactation milk yield was found (r=-0.48, p<0.10; r=-0.64, p<0.01, resp.). Close relationship between the response to ACTH challenge and milk protein yield was present only for insulin (r=-0.59, p<0.05).