• Environmental Engineering Research
• /
• v.19 no.2
• /
• pp.123-130
• /
• 2014

Percolation is the important process of extracting the soluble constituents of a fine mesh, porous substance by passage of a liquid through it. In this study, bio-wastes were percolated under various conditions through continuous percolation processes, and the energy potential of percolate was evaluated. The representative bio-wastes from the K composting plant in Darmstadt, Germany were used as the sample for percolation. The central objective of this study was to determine the optimal amount of process water and the optimum duration of percolation through the bio-wastes. For economic reasons, the retention time of the percolation medium should be as long as necessary and as short as possible. For the percolation of the bio-wastes, the optimal percolation time was 2 hr and maximum percolation time was 4 hr. After 2 hr, more than two-thirds of the organic substances from the input material were percolated. In the first percolation process, the highest yields of organic substance were achieved. The best percolation of the bio-wastes was achieved when the process water of 2 L for the first percolation procedure and then the process water of 1.5 L for each further percolation procedure for a total 8 L for all five procedures were used on 1,000 g fresh bio-waste. The gas formation potentials of 0.83 and $0.96Nm^3/ton$ fresh matter (FM) were obtained based on the percolate from 1 hr percolation of 1,000 g bio-waste with the process water of 2 L according to the measurement of the gas formation in 21 days (GB21). This method can potentially contribute to reducing fossil fuel consumption and thus combating climate change.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.4
• /
• pp.475-480
• /
• 2017

Objective : The main aim of the present study is to examine the electrode configurations used to record the muscle motor evoked potential (mMEP) in the upper extremities during surgery with the goal of producing a high and stable mMEP signal, in particular among the abductor pollicis brevis (APB), abductor digiti minimi (ADM), and across the APB-ADM muscles, which have been widely used for the mMEP in the upper extremities. Methods : Thirty right-handed patients were recruited in this prospective study. No patients showed any adverse events in their mMEP signals of the upper extremities during surgery. The mMEPs were recorded independently from the signals for the APB and ADM and for those across the APB-ADM. Results : The mMEP amplitude from across the APB-ADM was statistically higher than those recorded from the APB and ADM muscles. Moreover, the coefficient of variation of the mMEP amplitude from across the APB-ADM was smaller than those of mMEP amplitude recorded from the APB and ADM muscles. Conclusion : The mMEP from across the APB-ADM muscles showed a high yield with high stability compared to those in each case from the APB and ADM muscles. The configuration across the APB-ADM muscles would be best for mMEP recordings from the upper extremities for intraoperative neurophysiological monitoring purposes.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.6
• /
• pp.562-573
• /
• 2017

Some symbiotic characteristics of native Korean Rhizobium leguminosarum biovar viciae were analysed to get some informations desirable for cultivation of hairy vetch (Vicia villosa Roth) using its symbiont in Korea. The size of indigenous populations of R. leguminosarum biovar viciae was higher in seven upland soils showing $1.7{\times}10^2{\sim}5.8{\times}10^4cells\;g{\cdot}soil^{-1}$, which appeared to be 10% and 37% higher for cultivated and uncultivated soils of hairy vetch, respectively, than seven paddy soils with $1.7{\times}10^2{\sim}1.7{\times}10^4cells\;g{\cdot}soil^{-1}$. In symbiotic potentials, however, the yields of hairy vetch treated with 10-fold-diluted ($10^{-1}$) inoculum and 1000-fold-diluted ($10^{-3}$) one was 11.2% and 8.8% more, respectively, in paddy than upland. Hairy vetch inoculated with either strain KHR 106 from Sacheon or strain KHR 120 from Yesan among native Korean R. leguminosarum biovar viciae isolates was of similar yield increment of 16% (p < 0.05) in upland soils with native R. leguminosarum biovar viciae of $5.8{\times}10cells\;g{\cdot}soil^{-1}$. In case of coinoculation of the two strains, however, the yields was not significantly increased. In especial, isolate KHR 106, KHR 120, and KHR 122 from Suwon, which has also good symbiotic effectiveness, showed different protein profile patterns each other. As a result, hairy vetch is possibly able to use atmospheric nitrogen through symbiotic relationship with diverse native R. leguminosarum biovar viciae in Korean arable lands. For safe and good production of hairy, however, the use of superior strains with high symbiotic effectiveness and competitiveness will be desirable.

• Journal of Forest and Environmental Science
• /
• v.37 no.4
• /
• pp.309-314
• /
• 2021

This study aimed to enhance seed productivity and secure genetic resources for Pinus densiflora for. multicaulis. We analyzed the characteristics of cone and seed generated by control pollination between Pinus densiflora (PD) and Pinus densiflora for. multicaulis (PDM). The highest number of cone scales (63.0) was obtained from the self-pollinated (sp) PDM clone B (PDM-sp-B), whereas the lowest number of cone scales (44.7) was obtained from two combinations designated as PDM-A×PD-075 and PDM-A×PD-0111. Both female parents of the hybrids were PDM-A. The highest seed production capacity (80.8) was obtained from the open-pollinated (op) PDM clone B (PDM-op-B). The seed potentials of PDM-B×PD-0111, PDM-op-A, and PDM-sp-B were 67.4, 66.5, and 63.1, respectively. The highest number of fertile scales (41.5) was obtained from PDM-op-B, and the lowest number of fertile scales (28.8) was obtained from PDM-A×PD-075. The total number of aborted ovules and 1st aborted ovules was not statistically significant in the mating design. The cross combination of PDM-B×PD-0111 had the highest number (34.8) of filled seeds and the lowest number of 2nd aborted ovules (5.2) and empty seeds (9). PDM-op-B had the highest number of developed seeds (47.6), although the number of empty seeds was the highest (41.2). Therefore, we conclude that the mating design of PDM-B×PD-0111 is useful for future breeding programs to improve seed yield of PDM. Our results showed that there was a strong correlation between the following two parameter pairs: number of scales and number of fertile scales, and the number of fertility scales and seeds potential (r=0.89 and r=0.84, respectively; both p<0.01).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.3
• /
• pp.217-222
• /
• 1985

The yield responses of three isogenic lines in plant type of paddy rice(open-, spread- and broom-type) as affected by combined treatments of transplanting densities (47.62, 22.22, 15.15, 11.11 and 8.33 hills per sq. meter) and rates of fertilizer application (0, 0.5, 1.0 and 1.5 folds of standard rate) were studied by using of the partial differentiations by planting density(D):df(D,F)/dD, fertilizer rate(F):df(D,F)/dF, and their interaction(DXF):d$^2$ f(D,F)/dDdF from the multiple regression polynominal equations. Under the condition of wider planting, the broom-type showed most prominent and sensitive responses in yield among others. Also the action of transplanting density in the broom-type were positive both at lower and higher densities. Under the lower densities, the broom-type represented positive actions both at lower and higher rates of fertilizer application. Whereas the interactions between the density and fertilizer rate under the lower densities were rather negative. To achieve the labor-saving by lower transplanting density(11-14 hills per sq. meter), the amount of fertilizer rates were estimated as 1.3-1.5 folds much of the standard in the open-type, whereas more than 1.5 folds in the broom-type. Thus, the potentials to absorb more amounts of fertilizer may explain the compensating function of the broom-type for equivalent yields of the standards at reduced transplanting densities.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.4
• /
• pp.638-643
• /
• 2007

The full encoding sequence for human type II hexokinase (HXK II) was cloned into the E. coli expression vector pET 21b and expressed as a C-terminally hexahistidine-tagged protein in the BL2l (DE3) strain. The IPTG-induced HXK II approximately accounted for 17% of the total E. coli proteins, and 81% of HXK $II_{6{\times}His}$ existed in inclusion bodies. To improve the production of soluble recombinant HXK II protein, in the functionally active form, we used low temperature, and the osmotic stress expression method. When expressed at $18^{\circ}C$, about 83% of HXK $II_{6{\times}His}$ existed in the soluble fraction, which amounted to a 4.1-fold yield over that expressed at $37^{\circ}C$. The soluble form of HXK $II_{6{\times}His}$ was also highly produced in the presence of 1M sorbitol under the standard condition $(37^{\circ}C)$, which indicated that temperature downshift and low water potentials were required to improve the yield of active recombinant HXK II protein. The expressed protein was purified by metal chelate affinity chromatography performed in an IDA Excellose column charged with $Ni^{2+}$ ions, resulting in about 40mg recombinant HXK II protein obtained with purity over 89% from 51 of E. coli culture. The identity of HXK $II_{6{\times}His}$ was confirmed by Western blotting analysis. Taken together, using the stress-governed expression described in this study, human active HXK II can be purified in sufficient amounts for biochemical and biomedical studies.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.3
• /
• pp.75-82
• /
• 2016

Objective of this experiment was to predict the potential methane production with crop residues at different loading rates. Anaerobic digestion of barley and rapeseed straw substrates for biogas production was performed in Duran bottles at various biomass loading rates with crop residues. Through kinetic model of surface methodology, the methane production was fitted to a Gompertz equation. For the biogas production at mesophilic digestion with crop residues, it was observed that maximum yield was 37.2 and 28.0 mL/g at 6.8 and 7.5 days after digestion with 1% biomass loading rates of barley and rapeseed straws, respectively. For the methane content of mesophilic digestion, there were highest at 61.7% after 5.5 days and 75.0% after 3.4 days of digestion with barley and rapeseed straw on both 5% biomass loading rates, respectively. The maximum methane production potentials were 159.59 mL/g for 1% barley straw and 156.62 mL/g for 3% rapeseed straw at mesophilic digestion. Overall, it would be strongly recommended that biomass loading rate was an optimum rate at mesophilic digestion for using 1% barley and 3% rapeseed straws for feed stocks.

• Korean Journal of Plant Resources
• /
• v.21 no.1
• /
• pp.52-59
• /
• 2008

This study was conducted to evaluate the antioxidative potentials of 4 Aster species. Flowers and aerial parts were extracted with 80% ethanol, and antioxidative activities and bioactive substance contents were investigated. Flowers showed higher extraction yield than aerial parts of all 4 species used. Among the samples tested, Flowers of A. scaber were found to be the most effective in both DPPH and ABTS radical scavenging assay. However, $Fe^{2+}$ chelate effect of all samples were lower than EDTA. Four samples(A. scaber flowers, A. sphathulifolius aerial parts, A. koraiensis flowers, A. scaber aerial parts) out of eight showed stronger inhibitory activities against linoleic acid oxidation than BHT at 8 days. Total polyphenol and flavonoid contents of A. scaber flowers(90.46 and $75.36mg{\cdot}g^{-1}$) were the highest, and followed by A. sphathulifolius flowers.

• KSBB Journal
• /
• v.14 no.1
• /
• pp.9-16
• /
• 1999

Transforming growth factor $\beta$1(TGF-$\beta$1) has potentials to be used as a new therapeutic agent. However, studies with TGF-$\beta$ were hindered by its high cost. In this study, we developed an improved method to purify TGF-$\beta$1 from human platelets, for which four purification steps were used: platelet extraction, gel filtration, cation exchange chromatography, and reverse phase high performance liquid chromatography. After a final step of purification, a pure protein with a molecular weight of 25,000 corresponding to the commercially available TGF-$\beta$1 was obtained, which were confirmed by silver staining and Western blotting after SDS-polyacrylamide gel electrophoresis (SDS-PAGE). It was confirmed by the inhibitory effects of TGF-$\beta$1 on a mink lung epithelial cell line that the purified TGF-$\beta$1 had its biological activity, whose activity is slightly higher than that of the commercially available TGF-$\beta$1. About 3.7$\mug of the purified TGF-$\beta$1 was obtained from 10 units of concentrated human platelets, the final yield of which is about 21%.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.1
• /
• pp.55-64
• /
• 2000

Culture maturity assessment can be used to control fruiting body flush timing. Culture maturity of sawdust-based substrate was evaluated by using oak mushroom, (Lentinula edodes (Berk.) Pegler). The influence of substrate water potential (${\psi}$) on the growth and fruiting of three genotypes of L. edodes was also investigated. Glucosamine content revealed a peak at the fruiting body senescent stage. Glucosamine increased steadily to the sporophore senescent stage, and sharply declined at crop treatment. Lipid phosphate and ergosterol contents peaked at pinning and button break stages, respectively. Therefore lipid phosphate and ergosterol contents would be considered as the convenient measurement for judging culture maturity and fruiting potentials. The substrate pH values before inoculation and on the fruiting stage were varied from 6.3 to 4.0. This pH changes were detected as changes in color from bluish purple to yellow by direct bromphenol blue(BPB) spraying, and shown a good correlation with fruit body yield of the 1 st flush. Concerning water potential of the cultures, a slight reduction of water potential, -0.5MPa, stimulated mycelial and colony growths on liquid, agar and sawdust-based substrates. The water potential of well-colonized matured substrate was -0.7MPa and -4.0MPa, before and after the fruiting, respectively. Excellent water providing capacity (higher ${\psi}$) is expected to well-matured cultures with a high density of mycelial colonization. Also, the substrate water potential significantly affected by the interaction between genotypes and spawn run time.