• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.4
• /
• pp.188-198
• /
• 2016

In soybeans, responses of high temperature according to shift of sowing dates during the growing season was explored using the crop model, CROPGRO-soybean. In addition, it analyzed impact on change of sowing dates affects yield potential of soybean under future climate scenario (2041-2070). In Jeonju and Miryang during 1981-2010, if sowing at 15 or ten days ahead from 10 June, namely in shorten of the sowing day (i.e. when sown on 25 or 30 May), the yield potential reduced. However, the yield potential increased when sown 5 June. In the case of delay of sowing day (i.e. when sown on 15 or 20 June), reduction of yield potential in the average -5% was higher than increase in the average +2%. In particular, the relative changes for shorten of the sowing day or delay of the sowing day do not be shown in normal years which high temperatures did not abnormally occur during the growing season from 2003 to 2010 except when sown on 25 May. In abnormal years which high temperatures occurred during the critical period, especially R5 to R7, shorten of the sowing day affected to the increase of yield potential in Miryang, while the yield potential decreased in Jeonju except when sown on 5 June. However, delay of the sowing day influenced on the reduction of yield potential both in two sites. In future climate scenario of Representative Concentration Pathway (RCP) 8.5 during from 2041 to 2070, the increase and decrease of yield potential for shorten of the sowing day were +10/-9% for RCP 8.5 of Jeonju, and +14/-9% for RCP 8.5 of Miryang, respectively. Additionally, it showed +10/-17% for RCP 8.5 in Jeonju, and +10/-29% for RCP 8.5 in Miryang, respectively in the increase and decrease of yield potential for delay of the sowing day.

• Spatial Information Research
• /
• v.14 no.1 s.36
• /
• pp.115-128
• /
• 2006

The aim of the study is to select and verify for development of groundwater resources using Geographic Information System(GIS). The water balance, land cover, forest, soil, elevation, slope, hydrogeology and lineament were analyzed. Using GIS, relationship between the data and groundwater yield data was analyzed and the groundwater resources potential map was made for selecting suitable area for groundwater development. Then groundwater resource potential map was verified using groundwater yield data. The verified result showed the good agreement between the potential map and groundwater yield data. The potential map can be used for groundwater management which is related to groundwater development.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.214-220
• /
• 1999

Rice production in Korea has markedly increased during the last two decades due to newly developed high yielding varieties and improved production technology. This experiment was conducted to determine the potential of tropical japonica germplasm in enhancing the yield of temperate japonica. The yield performance of two tropical japonicas (IR 65597-29-3-2 and IR66154-52-1-2) and one temperate japonica (Dongjinbyeo) was compared at different plant densities and nitrogen levels under Korean environmental conditions. Although tropical japonicas showed low tillering habit and large panicles, they had similar leaf area index and dry weight at heading stage to Dongjinbyeo of the high tillering type indicating that there was not much difference between tropical and temperate japonica in terms of biomass production. The highest milled rice yield of 6.15 t/ha was obtained from Dongjinbyeo at a high nitrogen level with less planting density (220 kg N/ha and 30 $\times$ 15 cm). However, those of the two tropical japonicas were 5.36 t/ha at the condition of 165 kg N/ha and 30 x 10 cm planting density and 5.06 t/ha at the condition of 165kgN/ha and 15 x 15 cm planting density, respectively. Ripened grain of tropical japonicas ranged from 65 to 87%, while that Dongjinbyeo ranged from 82 to 97% under Korean conditions.

• Structural Engineering and Mechanics
• /
• v.57 no.6
• /
• pp.1015-1038
• /
• 2016

In the current research an advanced criterion with non-associated flow rule (non-AFR) for depicting the behavior of anisotropic sheet metals is presented to consider the strength differential effects (SDEs) for these materials. Owing to the fact that Lou et al. (2013) yield function is dependent on structure of an anisotropic material (BCC, FCC and HCP), an advanced yield function with inspiring of Yoon et al. (2014) yield function is proposed which is dependent upon anisotropic structures. Furthermore, to compute Lankford coefficients, a new pressure sensitive plastic potential function which would be dependent to anisotropic structure is presented and coupled with the proposed yield function with employing a non-AFR in a novel criterion which is called here 'dvanced criterion'. Totally eighteen experimental data are required to calibrate the criterion contained of directional tensile and compressive yield stresses for the yield function and directional Lankford coefficients for the plastic potential function. To verify the criterion, three anisotropic sheet metals with different structures are taken as case studies such as Al 2008-T4 (a BCC material), Al 2090-T3 (a FCC material) and AZ31 (a HCP material).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.3
• /
• pp.223-227
• /
• 2001

In this paper, the authors present the fabrication of high-yield Si thin-membranes by electrochemical etch-stop in tetramethyl ammonium hydroxide (TMAH): isopropyl alcohol (IPA):pyrazine solutions. The current-voltage (I-V) characteristics of n- and p-type Si in TMAH:IPA;pyrazine solutions were analysed, repsectively. Open circuit potential (OCP)and passivation potential (PP) of n- and p-type Si, respectively, were obtained and applied potential was selected between n- and p-type Si PPs. The electrochemical etch-stop method was applied to the fabrication of 801 micro-membranes with 20.0 $\mu\textrm{m}$ thickness on a 5" Si wafer. The average thickness of fabricated 801 micro-membranes on one wafer 20.03$\mu\textrm{m}$ and the standard deviation was ${\pm}$0.26$\mu\textrm{m}$. The Si surface of the etch-stopped micro-membranes was extremely flat with no noticeable taper or nonuniformity. The results indicate that use of the electrochemical etch-stop method for the etching of Si in TMAH:IPA;pyrazine solutions provides a powerful and versatile alternative process for fabricating high-yield Si micro-membranes.

• Transactions of Materials Processing
• /
• v.20 no.5
• /
• pp.369-376
• /
• 2011

A non-quadratic anisotropic strain rate potential was introduced as a conjugate potential of the yield stress potential Yld2000-2d to describe anisotropic behavior of sheet metals, in particular, aluminum alloy sheets under plane stress state. This strain-rate potential takes into account the anisotropic yield stresses and R-values measured along the directions measured at 0, 45 and 90 degrees from the rolling direction, as well as the balanced biaxial yield stress and strain-rate ratio. The convexity of the strain-rate potential was completely proven. The strain-rate potential was applied for two anisotropic aluminum alloy sheets, AA6022-T4 and AA2090-T3. The results verified that the strain rate potential properly described the anisotropic behavior of aluminum alloy sheets and was closely conjugate of Yld2000-2d under the plane stress state.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2000.04a
• /
• pp.248-249
• /
• 2000

• Ocean and Polar Research
• /
• v.41 no.3
• /
• pp.183-191
• /
• 2019

This study sought to find which model is most appropriate for estimating potential yield in the East Sea, Republic of Korea. For comparison purposes, the Process-error model, ASPIC model, Maximum entropy model, Observation-error model, and Bayesian state-space model were applied using data from catch amounts and total efforts of the whole catchable fishes in the East Sea. Results showed that the Bayesian state-space model was estimated to be the most reliable among the models. Potential yield of catchable species was estimated to be 227,858 tons per year. In addition, it was analyzed that the amount of fishery resources in 2016 was about 63% of the biomass that enables a fish stock to deliver the maximum sustainable yield.

• Animal Bioscience
• /
• v.36 no.5
• /
• pp.818-828
• /
• 2023

Objective: The purpose of this study was to analyze the effect of the hydrothermal pretreatment of anaerobic digestion sludge cake (ADSC) of cattle manure on the solubilization of organic matter and the methane yield to improve the anaerobic digestion efficiency of cattle manure collected from the sawdust pens of cattle. Methods: Anaerobic digestion sludge cake of cattle manure was thermally pretreated at 160℃, 180℃, 200℃, and 220℃ by a hydrothermal pressure reactor, and the biochemical methane potential of ADSC hydrolysate was analyzed. Methane yield recovered by the hydrothermal pretreatment of ADCS was estimated based on mass balance. Results: The chemical oxygen demand solubilization degree (COD_s) of the hydrothermal hydrolysate increased to 63.56%, 67.13%, 70.07%, and 66.14% at the hydrothermal reaction temperatures of 160℃, 180℃, 200℃, and 220℃, respectively. Considering the volatile solids content obtained after the hydrothermal pretreatment, the methane of 10.2 Nm³/ton-ADSC was recovered from ADSC of 1.0 ton, and methane yields of ADSC hydrolysate increased to 15.6, 18.0, 17.4, and 17.2 Nm³/ton-ADSC. Conclusion: Therefore, the optimal hydrothermal reaction temperature that yielded the maximum methane yield was 180℃ based on mass balance, and the methane yield from cattle manure containing sawdust was improved by the hydrothermal pretreatment of ADSC.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.5
• /
• pp.343-350
• /
• 2013

The objectives of this study were to estimate the potential biomass yield by using the biomass conversion index and evaluate the potential energy production by using the energy conversion index of biomass. Estimating the total biomass yield in Korea showed 9,646.3 thousand tons produced in 2012. Subsequent evaluation of the potential energy production using the estimated biomass yield in 2012 indicated that the calorific values were varied from 3,800 to 4,500 kcal $kg^{-1}$ for crop- and from 4,100 to 4,300 kcal $kg^{-1}$ for woody-based biomass, respectively. Among the examined biomass materials, the pruned branch of a nut tree appeared to be the greatest in bio-energy production showing 6,300 kcal $kg^{-1}$ in calorific value. Total potential energy production from agricultural by-products was estimated approximately at 3,966,000 TOE. Among the agricultural by-products examined, rice straw showed the greatest energy production potential being at 2,321,000 TOE. Furthermore, it might contribute to establishing the countermeasures of biomass utility in agricultural sector based on regional distribution chart of the potential biomass and energy yields in Korea.