• Food Science of Animal Resources
• /
• v.34 no.3
• /
• pp.395-402
• /
• 2014

The current study was conducted to identify technology for the production of high quality pork, based on the meat consumption habits of consumers. Macsumsuk, a type of kaolinite (a clay mineral), and/or a mixture of herbs (Mori Folium, Sophorae Radix, Glycyrrhizae Radix, Citri Leiocarpae Exocarpium, and Pogostemi Herba) were added to the diets of fattening pigs. Sixty barrow pigs (4 kinds of treatment ${\times}5$ pigs/treatment ${\times}3$ replicates) were randomly assigned to either the Control (no additives), T1 (3% Macsumsuk), T2 (3% Herb mixtures), or T3 (3% Macsumsuk + 3% Herb mixtures) groups, and were fed the diets for 60 d. Dressed weights were in the order of T1 ($93.40{\pm}4.68kg$) > T2 ($91.40{\pm}6.52kg$) > Control ($88.80{\pm}1.57kg$) > T3 ($86.80{\pm}2.01kg$). Back-fat thickness of the Control animals ($23.2{\pm}1.03mm$) was significantly greater than that of the various treatment groups (p<0.01). Numeric values representing the carcass yield and quality grade were higher for all the treated groups than the Control group, thought the difference was not statistically significant. Crude fat content was significantly higher in the Control group ($2.23{\pm}0.34%$) than in the treated groups (p<0.05). The addition of both Macsumsuk and herb mixtures into the diets of the pigs significantly reduced cooking loss of the pork compared to the Control (p<0.05). No statistically significant changes were observed in the shear force (average $5.87{\pm}0.54kg/cm^2$), water holding capacity (average $54.59{\pm}3.16%$), or CIE values of the pork, whereas cholesterol levels significantly decreased (p<0.01) in those fed Macsumsuk and/or the herb mixtures. No significant changes in fatty acid composition, total saturated fatty acid (SFA), total unsaturated fatty acid (UFA), or UFA/SFA ratios were observed by any of the treatments. In conclusion, the results obtained from this study suggest that the addition of Macsumsuk and/or herb mixtures into the diets of growing and fattening pigs improves the pork quality by reducing cooking loss, decreasing cholesterol content, and enhancing sensory characteristics.

• Journal of Korea Foundry Society
• /
• v.35 no.5
• /
• pp.114-119
• /
• 2015

This paper reports the effect of a refractory crucible type on the microstructure of duplex stainless steel (DSS) cast with the addition of gadolinium using air-induction melting. Grade 4A DSSs with 1 wt% of gadolinium (Gd) were fabricated in various crucibles including alumina ($Al_2O_3$), magnesia (MgO), calcia (CaO) coated with yttria ($Y_2O_3$) and graphite. The standard free energies of the formation of calcium and yttrium oxide were lower than those of gadolinium oxide and other crucible elements based oxide. The yield of Gd in DSS using $Al_2O_3$, MgO, CaO-coated $Y_2O_3$ and graphite was 5, 19, 83 and 96%, respectively. As Gd yield increased, the amount of Gd-based inclusions increased, the size of the inclusions were reduced, and the inclusions became evenly distributed.

• Proceedings of the KSEEG Conference
• /
• 2000.04a
• /
• pp.110-110
• /
• 2000

Temporal and spatial distribution patterns of the magmatic rocks and associated ore deposits in the Mesozoic magmatic - metallogenic belt along the Yangtz River, Anhui Province are used to determine and discuss the crust - mantle interaction processes. The magmatic rocks are Cu - Au mineralized high - K calc - alkalic intermediate ¬acidic (CAK) and Fe - Cu mineralized high - Na alkalic - calc intermediate - basic intrusive rocks (FCN) in the central part of the belt and grade to Cu - Mo - Pb - Zn - Ag mineralized calc - alkalic granitoids (CMG) and A - type granites (AG) in the southern and northern parts of the belt. Samples from the CAK and CMG yield Rb - Sr isochron ages of 137 - 140Ma with $(^{87}Sr/^{86}Sr)_{o}$ = 0.7060 - 0.7101, while those from the FCN and AG yield the ages of 120 - 129Ma with $(^{87}Sr/^{86}Sr)_{o}$ = 0.7047 - 0.7077. The Sr isotope ratios, CriTh ratios 0.4 - 3.1), Eu/Eu* ratios < 0.79 - 1.05) and initial epsilon (Nd) values (-16.6 - -6.3) for the CAK and CMG are consistent with magma derivation from old metamorphic basement rocks rich in metallogenic elements through a two - stage process of mantle - derived magma underplating caused by primary lithosphere extension and subsequent partial melting. On the basis of Sr isotope data, CriTh ratios (3.4 - 13.8), Eu/Eu* ratios (0.86 - 1.13) and initial epsilon (Nd) values (-7.7 - +1.4), the FCN and AG are considered to be formed through syntexis with material input from the mantle that resulted from further lithosphere extension followed by mantle - derived magma underplating on a large scale.

• The Plant Pathology Journal
• /
• v.20 no.4
• /
• pp.277-282
• /
• 2004

Amendments of a recirculating nutrient solution with potassium silicate were evaluated as a means to control Phytophthora capsici infections on pepper plant(Capsicum annuum L.). Supplying the solutions with 100 or 200 ppm of silicate significantly reduced motility, root decay, and yield losses attributed to infection of P. capsici. Treating inoculated plants with potassium silicate increased root dry weights and number of fruit, especially high-grade fruit. Results were slightly superior to non-inoculated controls. The two varieties, PBC 137 and PBC 602, responded similarly to the treatments. No significant differences were observed between the 100- and 200 ppm silicate treatments. Results were better when greenhouse conditions favored the spread of P. capsici. Silicon alone did not increase pepper yield, suggesting that it acts as a disease suppression agent rather than as a fertilizer, The phenomena by which silicon confers protection against P. capsici infection and disease development are not fully understood, but our results indicate that mechanisms other than a mechanical barrier to fungal penetration are involved.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.6
• /
• pp.1183-1188
• /
• 2005

Several lipases of commercial grade were screened to catalyze the methanolysis of castor oil, and an immobilized Candida antarctica (Novozym 435) had the highest activity among the lipases tested. To enhance the yield of methyl ricinoleate, several reaction parameters were optimized. The optimum temperature was $50^{\circ}C$, and the original water content of lipase was sufficient to maintain the activity of lipase, and additional water supplied inhibited the methanolysis of castor oil. Because the lipase was deactivated by methanol, the reaction was tested by three-step addition of 1 molar equivalent of methanol to the oil. However, the oil was not completely converted to its methyl esters. The final reaction mixture using 3 molar equivalents of methanol to the oil consisted of $70\%$ methyl ricinoleate, $18\%$ monoricinoleate, $11\%$ diricinoleate, and trace triricinoleate at the equilibrium state. The yield of methyl ricinoleate was $97\%$ at 6 molar ratio of methanol to the oil with 300g of castor oil and 6g of immobilized Candida antarctica at $50^{\circ}C$ within 24 h.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.714-719
• /
• 2002

In The Great Hanshin-Awaji Earthquake, the general yield brittle fractures were observed in beam-column connections of steel building frames. Among many influencing factors which affect the general yield brittle fracture, it can be considered that fracture toughness has substantial effects. Some studies are making clear the required toughness for the base metal and the weld metal, but general values are not proposed. Moreover, it seems that it is also important to pay attention to the toughness decrease in the weld heat affected zone (weld HAZ), because the toughness decrease occurs in the HAZs of mild steel. In this paper, the relationship between toughness of simulated HAZs of "the rolled steels for building structures (SN)" and the weld heat-input limit of the SN steel are investigated, in an attempt to provide the required toughness for HAZs. The relationships between the increase of the hardness value and toughness, and changes of microstructure after weld heat-input are also discussed. The main results are summarized as follows. 1) The SN400B can keep its toughness at higher heat-inputs compare to the SN490Bs. 2) The steel grade, which becomes harder than other steel grades at the same heat-input, has smaller absorbed energy and smaller limit of heat-input. 3) The weld heat-input limit of the SN400B and the SN490B are proposed separately for some required toughness values.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.45-52
• /
• 2004

Continuing pressure for the weight reduction of vehicles and improvement of collision safety is driving the development of new high strength steel with excellent formability. The formable high strength steels which have excellent drawability have been developed and applied to the complicated inner panels. Although BH steel have mainly occupied the material market for outer panels, it is challenged by DP steel which have low yield strength and good bake hardenability. The advanced high strength steel, TRIP steels and DP steels which have excellent formability are new alternatives to conventional HSLA steel for structural parts such as members and pillars. HSLA steels also have been used for automotive bumper reinforcements due to their high yield ratio. Higher grade complex phase steel(CP) were developed for bumper reinforcements by addition of precipitation hardening to transformation strengthened steel. The usage of the advanced high strength steel ale increasing and will become the main material in structural parts near future. This paper describes the features of newly developed high strength cold rolled steels for automobiles.

• Transactions of Materials Processing
• /
• v.15 no.2 s.83
• /
• pp.118-125
• /
• 2006

API steel is used for line-pipe to transport the oil and natural gas. As the recent trends in the development of API steel are towards the use of larger diameter and thicker plate, many researches have been studied to achieve higher strength, higher toughness and lower yield ratio in API steel. However, the strength of API steel after pipe forming is changed depending on the competition of the Bauschinger effect and work hardening which are affected by the strain history during pipe forming process. So, the purpose of this study is to investigate the influence of microstructure on the Bauschinger effect for API steel. To change the microstructure of API steel we have changed the hot rolling condition and the amounts of V and Cu addition. The compression-tensile test and the microstructure observation by OM and TEM were conducted to investigate the yield strength drop and the correlation between the Bauschinger effect and microstructure of API steel. The experimental results show that the increase of polygonal ferrites volume fraction increases the Baushcinger effect due to the back stress which comes from the increase of mobile dislocation density at polygonal ferrite interior during the compressive deformation. The hot rolling condition was more effective on the Bauschinger effect in API steel than the small amount of V and Cu addition.

• Computers and Concrete
• /
• v.29 no.6
• /
• pp.433-444
• /
• 2022

Concrete's compressive strength is widely studied in order to understand many qualities and the grade of the concrete mixture. Conventional civil engineering tests involve time and resources consuming laboratory operations which results in the deterioration of concrete samples. Proposing efficient non-destructive models for the prediction of concrete compressive strength will certainly yield advancements in concrete studies. In this study, the efficiency of using radial basis function neural network (RBFNN) which is not common in this field, is studied for the concrete compressive strength prediction. Complementary studies with back propagation neural network (BPNN), which is commonly used in this field, have also been carried out in order to verify the efficiency of RBFNN for compressive strength prediction. A total of 13 input parameters, including novel ones such as cement's and fly ash's compositional information, have been employed in the prediction models with RBFNN and BPNN since all these parameters are known to influence concrete strength. Three different train: test ratios were tested with both models, while different hidden neurons, epochs, and spread values were introduced to determine the optimum parameters for yielding the best prediction results. Prediction results obtained by RBFNN are observed to yield satisfactory high correlation coefficients and satisfactory low mean square error values when compared to the results in the previous studies, indicating the efficiency of the proposed model.

• Resources Recycling
• /
• v.15 no.3 s.71
• /
• pp.46-57
• /
• 2006

This study was carried out for the purpose of recovering the refined gypsum from waste phosphogypsum. The refined gypsum was recovered as a under product of 325 mesh wet screening followed by dehydration and hydration stage. The influence of dehydration temperature and time, dehydration rate, aging time, slurry density of hydration and sonication time on the yield and grade of gypsum were investigated. The refined gypsum of $94{\sim}96%$ grade is recovered in 95% yield by wet screening after selective dehydration and hydration process, from the phosphogypsum. For the better separation efficiency of gypsum, it is recommended to treat the phosphogypsum at the conditions of as follows; 6hr's dehydration at $140^{\circ}C$, hydration slury density of $3{\sim}10%$, hydration temperature of $20{\sim}30^{\circ}C$, hydration time of 2hr. In additions, addition of sodium citrate 0.005M and sonication of $5{\sim}10min.$ are effective for increase the recovery of gypsum. On the other hand, aging the dehydrated gypsum 16 hours or longer make decrease the recovery of gypsum remarkably.