• Proceedings of the Korean Society of Crop Science Conference
• /
• 2005.08a
• /
• pp.57-74
• /
• 2005

Rice yield and protein content have been shown to be highly variable across paddy fields. In order to characterize this spatial variability of rice within a field, the two-year experiments were conducted in 2002 and 2003 in a large-scale rice field of $6,600m^2$ In year 2004, an experiment was conducted to know if prescribed N for site-specific fertilizer management at panicle initiation stage (VRT) could reduce spatial variation in yield and protein content of rice while increasing yield compared to conventional uniform N topdressing (UN, ,33 kg N/ha at PIS) method. The trial field was subdivided into two parts and each part was subjected to UN and VRT treatment. Each part was schematically divided in $10\times10m$ grids for growth and yield measurement or VRT treatment. VRT nitrogen prescription for each grid was calculated based on the nitrogen (N) uptake (from panicle initiation to harvest) required for target rice protein content of $6.8\%$, natural soil N supply, and recovery of top-dressed N fertilizer. The required N uptake for target rice protein content was calculated from the equations to predict rice yield and protein content from plant growth parameters at panicle initiation stage (PIS) and N uptake from PIS to harvest. This model equations were developed from the data obtained from the previous two-year experiments. The plant growth parameters for this calculation were predicted non-destructively by canopy reflectance measurement. Soil N supply for each grid was obtained from the experiment of year 2003, and N recovery was assumed to be $60\%$ according to the previous reports. The prescribed VRT N ranged from 0 to 110kg N/ha with average of 57kg/ha that was higher than 33kg/ha of UN. The results showed that VRT application successfully worked not only to reduce spatial variability of rice yield and protein content but also to increase rough rice yield by 960kg/ha. The coefficient of variation (CV) for rice yield and protein content was reduced significantly to $8.1\%\;and\;7.1\%$ in VRT from $14.6\%\;and\;13.0\%$ in UN, respectively. And also the average protein content of milled rice in VRT showed very similar value of target protein content of $6.8\%$. Although N use efficiency of VRT compared to UN was not quantified due to lack of no N control treatment, the procedure used in this paper for VRT estimation was believed to be reliable and promising method for managing within-field spatial variability of yield and protein content. The method should be received further study before it could be practically used for site-specific crop management in large-scale rice field.

• Journal of Korean Society of Forest Science
• /
• v.106 no.2
• /
• pp.267-273
• /
• 2017

This study was conducted to construct a empirical yield table for Pinus densiflora in real forest. Since existing normal yield tables have been derived by studying and analyzing communities in ideal environment for tree growth, those tables provide more over-estimated values than ones from real forest. Because of this, there are some difficulties to apply the tables to empirical forest except for normal forest. In this study, therefore, we estimated stand growth for real forest on P. densiflora as the representative species of conifers. We used 1,957 sample plot data of P. densiflora in central Korea from National Forest Inventory (NFI) system, and analyzed through estimation, recovery and prediction in order by using Weibull function as a diameter distribution model. Weilbull and Schumacher models were applied for estimating mean DBH and mean basel area and it was found that the site index for P. densiflora in central Korea ranges from 8 to 14 at reference age 30. According to site 12 in the stand yield table, the Mean Annual Increment (MAI) of P. densiflora was $4.42m^3/ha$ at 30 years of age. Compared to existing volume table constructed before, it is showed that MAI of this study were lower. According to the paired t-test that is conducted with the gap of volume values between normal forest and real forest by site index and age, the P-value was less than 0.001 which is recognized to have a statistically significant difference. Based on the results in this study, it is considered to be helpful for practical management and management policy on P. densiflora in central Korea.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.5
• /
• pp.617-624
• /
• 2008

Well-designed steel moment connections will undergo local buckling before they exhaust their available rotation capacity, and inelastic post-buckling deformation plays a major role in defining the connection rotation capacity. An approximate analytical method to model strength degradation and failure of beam plastic hinges due to local buckling and estimation of the seismic rotation capacity of fully restrained beam-column connections in special steel moment-resisting frames under both monotonic and cyclic loading conditions is proposed in this study. This method is based on the plastic mechanism and a yield line plastic hinge (YLPH) model whose geometry is determined using the shapes of the buckled plastic hinges observed in experiments. The proposed YLPH model was developed for the improved WUF-W and RBS connections and validated in comparison with experimental data. The effects of the beam section geometric parameters on the rotation capacity were discussed in the companion paper (parametric studies).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.4
• /
• pp.238-246
• /
• 2005

Rice yield and protein content have been shown to be highly variable across paddy fields. In order to characterize this spatial variability of rice within a field, two-year experiments were conducted in 2002 and 2003 in a large-scale rice field of $6,600m^2$ In year 2004, an experiment was conducted to know if variable rate treatment (VRT) of N fertilizer, that was prescribed for site-specific management at panicle initiation stage, could reduce spatial variation in yield and protein content of rice while increasing yield compared to conventional uniform N topdressing (UN, 33kg N/ha at PIS) method. VRT nitrogen prescription for each grid was calculated based on the nitrogen (N) uptake (from panicle initiation to harvest) required for target rice protein content of $6.8\%$, natural soil N supply, and recovery of top-dressed N fertilizer. The required N uptake for target rice protein content was calculated from the equations to predict rice yield and protein content from plant growth parameters at panicle initiation stage (PIS) and N uptake from PIS to harvest. This model· equations were developed from the data obtained from the previous two-year experiments. The plant growth parameters for the calculation of the required N were predicted non-destructively by canopy reflectance measurement. Soil N supply for each grid was obtained from the experiment of year 2003, and N recovery was assumed to be $60\%$ according to the previous reports. The prescribed VRT N ranged from 0 to 110kg N/ha with an average of 57kg/ha that was higher than 33 kg/ha of UN. The results showed that VRT application successfully worked not only to reduce spatial variability of rice yield and protein content but also to increase rough rice yield by 960kg/ha. The coefficient of variation (CV) for rice yield and protein content was reduced significantly to $8.1\%$ and $7.1\%$ in VRT from $14.6\%$ and $13.0\%$ in UN, respectively. And also the average protein content of milled rice in VRT showed very similar value of target protein content of $6.8\%$. In conclusion the procedure used in this paper was believed to be reliable and promising method for reducing within-field spatial variability of rice yield and protein content. However, inexpensive, reliable, and fast estimation methods of natural N supply and plant growth and nutrition status should be prepared before this method could be practically used for site-specific crop management in large-scale rice field.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4D
• /
• pp.489-496
• /
• 2011

Bike system is one of the green transportation systems and spotlighted recently. In the TOD (Transit-Oriented Development) based transportation and urban planning, bike system will be the major part as linkage modes. In this paper, bike demand estimation model was firstly established in Korea, with considering of personal and household characteristics of traveller, social and economic characteristics of city, weather conditions, and so on. The model reflects population density, the number of students except elementary school students, the number of vehicles, the length of bike roads, and monthly income. The adjusted $R^2$ was 0.738: the model is highly fitted. The results of this paper yield bike demand estimation in the urban planning area: further estimated results will be using to determine economic feasibility and size of bike facility. In other words, this paper is expected to provide the theoretical basis that supporting justification and investment efficiency of bike plans, which are actively progressed recently.

• Journal of Environmental Impact Assessment
• /
• v.25 no.6
• /
• pp.525-531
• /
• 2016

This study integrates the Universal Soil Loss Equation(USLE) with GIS method to assess the soil erosion for national land cover map between 2007 and 2014. The land cover change map and C factors of USLE were applied to the estimation of spatial distribution of sediment yield. However, they generated distinct results because of differences in their applied methods and calculation processes of national land cover map. To generate the USLE model, C factors of MOE(Ministry of Environment) were compared with soil erosion of Inje stadium development area at the Naerin watershed in Gangwon province to 2014. The several thematic maps of research area such as land cover map, topographic and soil maps, together with tabular precipitation data used for soil erosion calculation. The land cover change were carried with level-2 and high level land cover map of MOE and estimated maximum double of soil erosion.

• Journal of the Korean Institute of Gas
• /
• v.20 no.6
• /
• pp.95-101
• /
• 2016

For a natural gas steam reforming, comparative studies of the performance in a conventional packed-bed reactor and a membrane reactor, a new conceptual reactor consisting of a reactor with series of hydrogen separation membranes, have been performed. Based on experimental kinetics reported by Xu and Froment, a process simulation model was developed with Aspen $HYSYS^{(R)}$, a commercial process simulator, and effects of various operating conditions like temperature, $H_2$ permeance, and Ar sweep gas flow rate on the performance in a membrane reactor were investigated in terms of reactant conversion and $H_2$ yield enhancement showing improved $H_2$ yield and methane conversion in a membrane reactor. In addition, a preliminary cost estimation focusing on natural gas consumption to supply heat required for the system was carried out and feasibility of possible cost savings in a membrane reactor was assessed with a cost saving of 10.94% in a membrane reactor.

• Research in Plant Disease
• /
• v.17 no.3
• /
• pp.317-325
• /
• 2011

Bacterial pustule of soybean (Glycine max) caused by Xanthomonas axonopodis pv. glycines is one of the most prevalent bacterial diseases of soybean in Korea, where it causes considerable yield loss. This study was carried out to develop yield prediction model for bacterial pustule by analyzing correlation between the percentage of diseased leaf area and yield. The severe disease incidence of soybean bacterial pustule caused yield losses by 19.8% in 2006 and 16.8% in 2007, respectively. Severity of bacterial pustule greatly affected on 100 seed weight and yield, but did not on stem length, number of branches per plant, number of pods per plant, number of seeds per plant. On the other hand, correlation coefficients between diseased leaf area and yield were $-0.93^*$('06) and $-0.77^*$('07), respectively. The regression equation obtained by analyzing correlation between the percentage of diseased leaf area and yield loss in 2006 and in 2007 was y = -3.2914x + 348.19($R^2$ = 0.8603) and y = -2.9671x + 302.08($R^2$ = 0.9411), respectively. These results will be helpful in estimating losses on a field-scale and thereby predicting the production of soybean.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.5 no.4
• /
• pp.67-74
• /
• 2017

Purpose - The main purpose of this study is to contribute to the elevation of producers' production at various levels by proposing the creation of producer improvement indexes that can be used for the successful 6th industrialization of Korean agribusiness based on the Kano model and has synergistic effects on the development of the 6th industry through scientific researches. Research design, data, methodology - To this end, this study derived better and worse index from the same estimation of Timko's customer satisfaction index as in the evaluation charts used in previous researches and theoretical studies on the Kano model. Results - In this paper, we suggested that the formula for producing PSCI Index be applied to yield the producer improvement index in the 6th industry, in order to draw SIPPI. Conclusions - If this suggestion is realized, then a lot of researchers will be supported to more systematically study producers, and it is expected to contribute to the development of the 1th industry, a basis for the successful 6th industry. Moreover, the central government and municipalities are expected to provide a variety of clues for applying various policies for successful agribusiness.

• Tunnel and Underground Space
• /
• v.15 no.3 s.56
• /
• pp.228-235
• /
• 2005

Friction angle and cohesion of rock masses can be estimated from Hoek and Brown failure criterion and then plastic corrections can be applied using Mohr-Coulomb yield function. This study finds that this estimation procedure would not be appropriate for weak rock masses and for cases where low confining stress is expected to develop. A procedure is outlined in this paper for estimating plastic corrections directly from Hoek and Brown material model. Comparative study shows that direct procedure would simulate non-linear failure surface better than indirect procedure especially in the low confining stress regime.