• Mycobiology
• /
• v.41 no.1
• /
• pp.42-46
• /
• 2013

The effects of the composition of a mixture containing food waste compost (FWC), rice bran (RB), and oak sawdust (SD) on the antler-type fruiting body (FB) yield of Ganoderma lucidum were studied. Experiments were performed using 0 (control), 5, 10, 15, 20, 25, 30, 35, and 40% (w/w) FWC added to a basal growth medium consisting of 20% (w/w) RB and 80% (w/w) SD. The content of 15% FWC gave the highest FB yield ($27.0{\pm}1.3$ g/bottle), which was 44% higher than the yield ($18.6{\pm}2.8$ g/bottle) of the control treatment. However, FWC contents of 20~40% showed reduced yield (2.4~23.0 g/bottle), partly because FWC had a high Na concentration (0.6%). These results demonstrate the potential for use of FWC as a component of a growth medium for production of G. lucidum FBs.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.6
• /
• pp.1211-1219
• /
• 2001

The electro-rheological(ER) fluids for smart hydraulic system are a class of colloidal dispersion which exhibit large reversible Changes in their rheological behavior when they are subjected to external electrical fields. This paper presents experimental results on material properties of an ER fluids subjected to electrical fatigues. As a first step, ER fluid is made of methyl cellulose(MC) choosing 25% of particle weight-concentration. Following the construction of test mechanism for durability estimation, the dynamic yield shear stress and the current density for the ER fluids of MC component are experimentally distilled as a function of electric field. In addition, the surface roughness of the employed electrode are evaluated as a function of the number of the electric-field cycles.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.6
• /
• pp.805-811
• /
• 1995

Final biomass yields (peak optical density) and growth rates (divisions/day) of seven clones of Skeletonema costatum from Korean coastal waters were measured to understand their intraspecific variations in the light intensity niche component under $25^{\circ}C$ condition. Daily growth rates of 6 of 7 S. costatum, clones were maximum at 6000 lux while that of YS4, a neritic clone, was maximum at 9000 lux. The final biomass yields of 4 of the 7 S. costatum clones were maximum at the lowest light intensity of 2000 lux. Minimum final biomass yields were found at 9000 lux in all the S. costatum clones other than an estuarine clone, HDC9. The intraspecific variations of the mean growth rate and mean final biomass yield under each of the three different light intensity in terms of the coefficient of variation were not greater than 10% in any of the 7 S. costatum clones.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.05a
• /
• pp.86-89
• /
• 2002

Due to extremely large reduction of area or extrusion ratio in ordinary production of extruded profiles, anisotropy is naturally induced by large severe deformation during the extrusion process. Therefore, the anisotropic properties play a great role in the post processing of extruded profiles, such as in bending. Moreover, undesirable deformation will be involved when the deformation-induced anisotropy is ignored. In order to observe the deformation-induced anisotropy of the thin-walled product, the proposed algorithm is applied to some chosen industrial extrusion processes. In the resent work, the method for prediction of deformation-induced anisotropy employing the Barlats six-component yield potential to the rigid-plastic finite element method is proposed. The proposed algorithm is verified with the comparison to the crystallographic texture analysis, and then applied to the C-section exclusion process using a square die. The predicted anisotropy is then compared with the experimental and computational observations for validating the proposed algorithm.

• Transactions of Materials Processing
• /
• v.11 no.8
• /
• pp.724-730
• /
• 2002

Due to extremely large reduction of area or extrusion ratio in ordinary production of extruded profiles, anisotropy is naturally induced by large severe deformation during the extrusion process. Therefore, the anisotropic properties play a great role in the post processing of extruded profiles, such as in bending. Moreover, undesirable deformation will be involved when the deformation-induced anisotropy is ignored. In order to observe the deformation-induced anisotropy of the thin-walled product, the proposed algorithm is applied to some chosen industrial extrusion processes. In the present work, the method for prediction of deformation-induced anisotropy employing the Barlats six-component yield potential to the rigid-plastic finite element method is proposed. The proposed algorithm is verified with the comparison to the crystallographic texture analysis, and then applied to the C-section extrusion process using a square die. The predicted anisotropy is then compared with the experimental and computational observations for validating the proposed algorithm.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.24 no.3
• /
• pp.43-50
• /
• 1979

The effect of planting time and density of soybean on the yield component and yield when intercropped within barley rows or seeded after harvest was evaluated. Early maturing barley variety 'Olbori' was seeded at 2 levels of planting density 40 ${\times}$ 18 and 60 ${\times}$ 18 (row-hill space in em), and the soybean, variety "Dongbuktae", was seeded on June 1 as a inter-crop, June 15 and 30 as a afterharvest crop, all 2 levels of row space (40, 60 cm) and 3 levels of hill space (10, 15, 20 em). Soybean yield was increased in the following conditions: early seeding of soybeans within rows at 60 ${\times}$ 20 em density and soybean seeding after barley harvest at 40 ${\times}$ 20 em density./TEX> 20 em density.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.1
• /
• pp.6-10
• /
• 1998

This study was conducted to obtain basic information on the development of new triticale cultivars with good quality and high productivity for soiling feed. Twelve cultivars introduced from Poland, Canada and two cultivars developed in Korea were planted in the experimental field at Ansong National University in 1995. Major growth traits and nutrient components for feed were measured and analyzed using principal component analysis and average linkage cluster analysis. 'Prego', 'Prag 46/3', and 'Clercal' were relatively high in forage yield. Most of forage nutrient contents except cellulose were higher in Prego, Clercal, and 'Cumulus' than other cultivars. Results of principal component analysis on 11 traits including forage yield and nutrient contents showed that 72.59% of total variation were explained by the first and second principal components. The Z$_1$ had high correlation with the contents of forage nutrient components and Z$_2$ with plant height, fresh, and dry weight. Fourteen cultivars were classified into 7 groups by multivariate analysis. Clercal and Prego in Group I could be useful source for the improvement of triticale as an important forage crop because they exhibited high productivity as well as high contents of nutrient components for feed.

• International Journal of Contents
• /
• v.13 no.3
• /
• pp.1-8
• /
• 2017

Rice plant numbers and density are key factors for yield and quality of rice grains. Precise and properly estimated rice plant numbers and density can assure high yield from rice fields. The main objective of this study was to automatically detect and count rice plants using images of usual field condition from an unmanned aerial vehicle (UAV). We proposed an automatic image processing method based on morphological operation and boundaries of the connected component to count rice plant numbers after transplanting. We converted RGB images to binary images and applied adaptive median filter to remove distortion and noises. Then we applied a morphological operation to the binary image and draw boundaries to the connected component to count rice plants using those images. The result reveals the algorithm can conduct a performance of 89% by the F-measure, corresponding to a Precision of 87% and a Recall of 91%. The best fit image gives a performance of 93% by the F-measure, corresponding to a Precision of 91% and a Recall of 96%. Comparison between the numbers of rice plants detected and counted by the naked eye and the numbers of rice plants found by the proposed method provided viable and acceptable results. The $R^2$ value was approximately 0.893.

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.243-249
• /
• 2008

In the previous study, 141 $BC_3F_2$ lines from a cross between the Oryza sativa cv. Milyang 23 and O. glaberrima were used to identify favorable wild QTL alleles for yield component traits. In this study, we carried out QTL analysis of four grain morphology as well as four yield component traits using 141 $BC_3F_5$ lines from the same cross and compared QTLs detected in two different generations. The mean number of O. glaberrima segments in the 141 $BC_3F_5$ lines ranged from 1 to 13 with 2.69 and 5.71 of the average means of homozygous and heterozygous segments, respectively. There was a three-fold difference in the number of QTLs detected for four traits commonly evaluated in two generations (seven QTLs in the $BC_3F_5$ vs 21 in the $BC_3F_2$ population). The percentages of the phenotypic variance explained by QTLs in the BC3F5 population were similar to or less than those in the $BC_3F_2$ population. This is probably due to the difference in the genetic composition of two populations and the environmental effects. The locations of the QTLs commonly detected in both generations were in good agreement except for one QTL for spikelets per panicle. The yield QTL, yd3 was colocalized with the spikelets per panicle, spp3. Yield increase at this locus is due to the increase in spikelets per panicle, because both traits were associated with increase in spikelets per panicle and yield due to the presence of an O. glaberrima allele. Clusters of QTLs for grain morphology traits were observed in two chromosome regions. One cluster harboring five QTLs near SSR markers RM106 and RM263 was detected on chromosome 2. This population would serve as a foundation for development of the introgression line population from a cross between Milyang 23 and O. glaberrima.

• Journal of Food Hygiene and Safety
• /
• v.18 no.3
• /
• pp.146-152
• /
• 2003

Pyruvate dehydrogenase phosphatase (PDP) is a mitochondrial protein serine/threonine phosphatase that catalyzes the dephosphorylation and concomitant reactivation of the pyruvate dehydrogenase component of the pyruvate dehydrogenase complex (PDC). PDP consists of a catalytic subunit (PDPc, Mr 52,600) and regulatory subunit (PDPr, Mr 95,600). In the presence of $Ca^{2+}$, PDPc binds to the dihydrolipoamide acetyltransferase (E2) component of the pyruvate dehydrogenase complex in proximity to its substrate, the phosphorylated E1 component, thereby increasing the rate of dephosphorylation. PDPc possesses and intrinsic $Ca^{2+}$ binding site and a second $Ca^{2+}$ site is generated in the presence of E2. Using the unique interaction, highly pure PDPc was produced by the GSH-Sepharose-GST-L2 matrix with a specific activity of approx. 1000 U/mg and a yield of about 80%.