• Corrosion Science and Technology
• /
• 제9권3호
• /
• pp.105-108
• /
• 2010

The product specification of the Continuous Hot Dip Galvanizing Line (CGL) changes and varies constantly with different customers' requirements, especially in the zinc coating weight which is from 30 to 150 g/$m^2$ on each side. Since the coating weight of zinc changes often, it is very important to reduce time spent in the transfer of target values changed for low production cost and yield loss. The No.2 CGL in China Steel Corporation (CSC) has improved the control of the air knife which is designed by Siemens VAI. CSC proposed an experiment design which is an $L_9(3^4)$ orthogonal array to find the relations between zinc coating weight and the process parameters, such as the line speed, air pressure, gap of air knife and air knife position. A non-linear regression formula was derived from the experimental results and applied in the mathematical model. A new air knife feedforward control system, which is coupled with the regression formula, the air knife control system and the process computer, is implemented into the line. The practical plant operation results have been presented to show the transfer time is obviously shortened while zinc coating weight target changing and the product rejected ratio caused by zinc coating weight out of specification is significantly reduced from 0.5% to 0.15 %.

• 한국국방경영분석학회지
• /
• 제8권2호
• /
• pp.17-30
• /
• 1982

This paper offers an optimal artillery deployment scheme for the defending unit when two forces are confronted at a military front line. When proposed gun sites, types and number of guns as well as targets are given, the solutions of the two models in this paper direct each (unit of) guns to a certain location. The aim of the models is to maximize the number of guns which can hit important targets. Unlike widely used target assignment models, these models are formulated using the set covering problem concept. These models do not contain probabilities and time. Thus they are simple as models, easy in implementation, and yield tractable solutions. The dynamic and probabilistic feature of battle situations is implicitly reflected on the models. The first model is for the case that enemies' approaching route is clearly predictable, while the second model is for the unpredictable approaching route case.

• 대한토목학회논문집
• /
• 제41권1호
• /
• pp.75-83
• /
• 2021

지나친 도시화로 인한 차량증가로 도시교통 문제가 사회문제로 인식되고 있고 이로 인해 효과적인 도로계획과 설계는 더욱 중요하게 되었다, 이에 따라 기존 도로를 확장하거나 새로운 도로를 건설할 때 도로의 교통량 산정에 필요한 기준과 방법을 도로용량편람으로 제정하여 운영하고 있다. 하지만 철도 노선에는 이러한 중요성에 불구하고 체계적인 교통량 산정기준이나 방법이 없었다. 따라서 본 연구에서는 철도의 경쟁력 강화를 위해 철도에도 노선용량이란 개념을 도입하여 명확한 철도 노선용량의 산정기준과 방법을 제시 하였다. 그 결과를 바탕으로 국내 철도의 주요 선구별 노선용량을 산정하였다, 이에 따라 본 연구에서 제시한 노선용량 산정방법을 적용하면, 기존의 철도 노선 및 새롭게 확대되는 신규 노선의 용량에 대한 적정한 투자와 설계가 계획단계에서부터 이루어 질 수 있도록 체계적인 기준을 제공할 수 있게 되었으며, 향후 철도 운행효율성 향상에도 도움을 줄 수 있을 것으로 기대한다.

• Journal of Crop Science and Biotechnology
• /
• 제10권4호
• /
• pp.277-280
• /
• 2007

Pepper fruit anthracnose, caused by Colletotrichum acutatum, results in serious yield loss and affects crop quality in many Asian countries, making it a disease of economic consequence. A source resistant to C. acutatum was identified by the AVRDC within the line Capsicum chinense Jacq. PBC932. The resistant breeding line C. annuum AR is the $BC_3F_6$ generation derived from C. chinense Jacq. PBC932. The inheritance of resistance to C. acutatum was analyzed in segregating populations derived from the two crosses HN 11$\times$AR and Daepoong-cho$\times$AR. Detached mature green fruits were inoculated using microinjection method. The disease response was evaluated as the disease incidence at 7 DAI. The segregation ratios of resistance and susceptibility to C. acutatum in the $F_2$ and $BC_R$ populations derived from the two crosses fit significantly to a 1:3 Mendelian model. This indicates that the resistance of AR to C. acutatum is controlled by a single recessive gene.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권3호
• /
• pp.254-261
• /
• 2005

The over-expression of Bcl-2 has greatly improved the culture period, specific growth rate, and maximum viable cell density of NS0 cells culture under low serum condition. Further analysis of these data suggests that a saturation model of the Monod type can be used to represent the relationships of specific growth rate and initial serum concentration. The ${\mu}_{max}$ and $K_s$ for the Bcl-2 cell line is $0.927day^{-1}\;and\;0.947\%(v/v)$ respectively, which are $21\%$ greate and $7\%$ lower respectively than its control counterpart. Study on the amino acid supplementation revealed that Bcl-2 cell lines possess greater improvement in the specific growth rate and maximum viable cell density compared to the control cell lines. A further increase in the amino acid supplementation has resulted a $17\%$ decrease in specific growth rate and no improvement in maximum viable cell density in the control culture. However, the Bcl-2 cell line exhibited a better growth characteristic in this culture condition compared to that of control cell lines. The higher specific growth rate and maximum viable cell density of the Bcl-2 cell line in medium fortified with serum and MEM EM suggested a more efficient nutrient metabolism compared to that in the control cell line. The low serum and amino acid utilisation rate and the higher cell yield may prove to be important in the development of serum/protein free culture.

• Journal of Positioning, Navigation, and Timing
• /
• 제5권1호
• /
• pp.1-9
• /
• 2016

Range-based wireless localization system must measure accurate range between a mobile node (MN) and reference nodes. However, non-line-of-sight (NLOS) error caused by the spatial structures disturbs the localization system obtaining the accurate range measurements. Localization methods using the range measurements including NLOS error yield large localization error. But filter-based localization methods can provide comparatively accurate location solution. Motivated by the accuracy of the filter-based localization method, a filter residual-based NLOS error estimation method is presented in this paper. Range measurement-based residual contains NLOS error. By considering this factor with NLOS error properties, NLOS error is mitigated. Also a process noise covariance matrix tuning method is presented to reduce the time-delay estimation error caused by the single dynamic model-based filter when the speed or moving direction of a MN changes, that is the used dynamic model is not fit the current dynamic of a MN. The presented methods are evaluated by simulation allowing direct comparison between different localization methods. The simulation results show that the presented filter is more accurate than the iterative least squares- and extended Kalman filter-based localization methods.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권4호
• /
• pp.459-465
• /
• 2009

This paper considers the influence of internal heat exchangers to the efficiency of a refrigerating system. These internal heat exchangers(liquid-suction or suction-line heat exchangers) can, in some cases, yield improved system performance while in other cases they degrade system performance. A steady state mathematical model is used to analysis the performance characteristics of refrigeration system with internal heat exchanger. The influence of operating conditions, such as gas cooler pressure and evaporation temperatures, superheat in the evaporator and temperature of gas cooler outlet, to optimal dimensions of the heat exchanger is also analyzed in the paper. The main results were summarized as follows : the mass flowrate of R744, inner diameter tube and length of internal heat exchanger, and effectiveness have an effect on the cooling capacity, compressor work and RCI(Relative capacity index) of this system. With a thorough grasp of these effect, it is necessary to design the R744 compression refrigeration cycle using internal heat exchanger.

• Steel and Composite Structures
• /
• 제5권1호
• /
• pp.49-70
• /
• 2005

This paper reports on finite element analysis techniques that may be applied to the study of circular hollow structural sections and related bearing connection geometries. Specifically, a connection detail involving curved steel saddle bearings and a Structural Tee (ST) connected directly to a large-diameter Hollow Structural Section (HSS) truss chord, near its open end, is considered. The modeling is carried out using experimentally verified techniques. It is determined that the primary mechanism of failure involves a flexural collapse of the HSS chord through plastification of the chord wall into a well-defined yield line mechanism; a limit state for which a shell-based finite element model is well-suited to capture. It is also found that classical metal plasticity material models may be somewhat limited in their applicability to steels in fabricated tubular members.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.33-40
• /
• 1998

Although a structural analysis based on e linear elastic theory yields good results for deformations and stresses produced by working loads, it fails to assess the teal load-carrying of the plates on the verge of yielding. In case of a limit analysis of plates, the yield line theory is widely used on the basis of the upper bound theorem and theoretically it overestimates the strength of the plate. There is, therefore, a general need for analytical methods of predicting the inelastic behavior and load-carrying capacities of plate subjected to arbitrary loadings and boundary conditions. The $\rho$-version of finite element method has been presented for determining the accurate limit load of plates. The numerical results by $\rho$-version model compares with the results obtained by the h-version software ADINA as well as with the available analytical solutions in literatures.

• 한국전산구조공학회논문집
• /
• 제12권1호
• /
• pp.1-14
• /
• 1999

선형탄성이론을 기초로 한 구조해석의 경우 사용하중상태에서의 변형과 응력은 만족할 만한 결과를 나타내지만, 항복후의 처짐과 파괴시의 극한하중 산정의 정확한 해석이 불가능하다. 평판의 극한해석시, 상한계 이론을 바탕으로 한 항복선 이론이 널리 사용되고 있으나 이론적으로 평판의 강도를 과대평가하게 된다. 그러므로, 임의의 하중조건과 경계조건에 대한 비선형 거동과 극한내하력을 산정할 수 있는 해석기법이 필요하다. 평판의 정확한 극한하중을 위해 p-Version 유한요소법을 제안하며, p-Version의 해석치를 범용 구조해석 프로그램인 ADINA의 결과와 문헌의 이론치와 비교하였다.