• The Journal of Fisheries Business Administration
• /
• v.25 no.1
• /
• pp.37-59
• /
• 1994

Many studies to cope with the present problems of Korean coastal and offshore fisheries has been performed, but these were done partly in necessities and general studies for Korean inshore and offshore fisheries are in early stage. Most of these studies adopted analytical way of approach for each fishery individually and they could not reflect the effect of correlated interaction among fisheries on the several common species/stocks, and thus optimal effort allocation was impossible. To consider general fisheries and optimal effort allocation among competing mixed species, a linear programming (LP) approach is applied in this study and introduced into 16 important inshore and offshore fisheries with 13 constraining species which were chosen by annual yield order. This study is not based on the biological interaction among species (i.e., prey - predator system) but the technological interaction between species and fishing efforts. For the application of LP model in these fisheries, the standardization of fishing efforts through different fishing gears could not be successful and a new way of effort standardization through CPUE for vessel tonnage was originated. Total standardized fishing effort on a particular species i, Ei, is computed as the linear summation of standardized fishing effort generated by each fishery j. That is, (equation omitted) where $f_{j}$ is the total vessel tonnage of fishery j and aij is the coefficients contributing to the standardized fishing effort per ton for species i taken in fishery j. The total fishing effort level on species i due to both directed fishing and by - catch can thus be accounted in the aij's. Optimal effort allocation among the j fisheries may be considered a minimizing problem (minimize $\Sigma$ $f_{j}$), subject to the constraints that standardized fishing effort levels on particular species are maintained at, above, and below certain predefined levels. Fishing effort goals for individual species can be based on various biological and/or economic criteria, i.e., fishing effort level generating maximum sustainable yield and/or maximum economic yield. But in this study the $F_{0.1}$ criteria which was accepted as an approximate level for $F_{mey}$ by Outland and Boerema's (1973) study. The findings of this study are, (1) LP model can be applied to the Korean inshore and offshore fisheries giobally. (2) Through a new way of combining multiple different fisheries' efforts for a particular species together generating standardized fishing effort, Schaefer curve could be applied to the complex system successfully. (3) The results of this study for total reduction scale were mostly the same as those of prior studies, but different much from the individual scales of reduction. This study showed the necessities for exploitation of more concrete parameters to put into consideration of profitability of fisheries and social factors, and this model can be modified according to the actual constraints. Also, considering the age structure of stocks, this model can be developed into better one for better fisheries management.ent.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.3
• /
• pp.230-237
• /
• 2011

The study was performed to investigate the characteristics of charcoal and temperature change of a kiln's inner and outer walls in carbonization process using improved kiln. In this kiln system, carbonization process was completed in eight days. In the kiln, the ignition temperature was kept about $720^{\circ}C$. And then the temperature were increased gradually prior to be refined. Finally, the temperature in refining process was reached to maximum point, $1,000^{\circ}C$. In the chimney, the temperature was increased gradually from $90^{\circ}C$ at ignition to $750^{\circ}C$ at refining. The temperature change of the kiln wall resembles a temperature change progress curve during a carbonization process. The highest temperature of the kiln wall that appeared by a carbonization process was around $500^{\circ}C$. As a result of having measured an inner wall and the outer wall of the kiln using an infrared thermography camera, it was judged with there being considerable latent heat on kiln wall and ceiling. Fixed carbon contented of charcoal was 85.9~89.9%. Refining degree of charcoal, hardness, calorific value and pH were l, 12, 7,047~7,456 kcal/kg, 9.0~9.9, respectively. The yield of wood charcoal was 13.8%, and compared to conventional kiln's yield increased 1.5%.

• Journal of Animal Science and Technology
• /
• v.47 no.5
• /
• pp.905-912
• /
• 2005

The study was conducted to determine the effects of hormone injection on casting day of antler, velvet antler yield, and blood hormone concentration in elk deer and Sika deer. The study revealed that the casting day of Elk and Sika deer at medroxy progesterone acetate(MPA) injection averaged 21 days after MPA injection, which was earlier 38 and 24 days, respectively, compared control(P<0.01). The regrowth of antler in both Sika deer and Elk occurred in the MPA injection and the duration of antler growth was 2 times longer than control. The total yield of velvet antler of Elk in the control and MPA injection was 7.31 and 10.11kg and the that of sika deer was 1.00 and 1.41kg, respectively. Blood testosterone concentration of Sika deer and Elk was less than 4.0ng/ml for both at the casting and during the antler growing. Blood IGF-1 concentrations of Sika deer and Elk during the antler growing tended to increase with the same as growth curve of antler.

• Journal of Korean Society of Forest Science
• /
• v.90 no.5
• /
• pp.650-662
• /
• 2001

The growth and yield models for five different kinds of natural forest types were systemically developed in the natural Broadleaved-Korean pine Forests in Northeast China. The data were collected from 359 temporary plots and 58 permanent plots with area ranged from 0.06 ha to 1.0 ha, ranging in stand age from 43 to 364 years. The Site Class Index (SCI) was introduced to evaluate site quality and the Crown Competition Factor (CCF) was selected as a measure of stand density for the mixed natural forest. The Chapman-Richards function was adopted to develop SCI equation and height-diameter curve. The Schumacher growth function was selected as base model to develop the DBH, basal area, and stand volume growth models by using re-parameterized method. In modeling mean DBH and basal area growth, it was found that the asymptotic parameter A of Schumacher function was exponentially related to site quality (SCI) and stand density (CCF). The rate parameter k was related to stand density and it was independent of SCI. Several validation measures for predicted stand variables were evaluated in the growth and yield models using independent data sets. The results indicated that relative mean errors (RME) in predicted stand attributes were less than ${\pm}5%$ and the estimated precision values of the stand variables were all greater than 95%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.774-778
• /
• 2010

Upland erosion pollutes surface waters and often causes serious problems when deposition occurs. This study builds a sediment rating curve using the measured sediment yield and the simulated soil erosion by a GIS-embedded empirical model. The coefficient of determination ($R^2$) between the simulated soil erosion and the measurement sediment yields with rainfall amount are 0.427 for Donghyang and 0.667 for Cheonchen, but the values with rainfall intensity are 0.873 and 0.927 respectively. The data are divided into two groups: one for calibration during 2002-2005 (48 months) and the other for estimation during 2006-2008 (36 months). The first data group (2002-2005) was used to derive the SDR with an aid of soil erosion calculated by the USLE and the measured sediment yield. The mean SDR with rainfall amount is 6.273 and 3.353, respectively, while 4.799 and 2.874 for rainfall intensity. But the standard deviation (STD) with rainfall intensity is 0.930 and 0.407, which is much less than that with rainfall amount (3.746 and 2.090) for both sites. The results show the derived SDR provides reasonable accuracy and rainfall intensity gives better performance in calculating soil erosion than rainfall amount.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.11
• /
• pp.65-73
• /
• 2006

Reliability between safety factor and reliability index for driven and bored pile load capacity was analyzed in this study. 0.1B, Chin, De Beer, and Davisson's methods were used for determining pile load capacity by using load-settlement curve from pile load test. Each method defines ultimate yield and allowable pile load capacities. LCPC method using CPT results was performed for comparing results of pile load test. Based on FOSM analysis using load factors, it is obtained that reliability indices for ultimate pile load capacity were higher than those of yield and allowable condition. Present safety factor 2 for yield and allowable load capacities is not enough to satisfy target reliability index $2.0{\sim}2.5$. However, it is sufficient for ultimate pile load capacity using safety factor 3.

• Journal of Animal Science and Technology
• /
• v.46 no.5
• /
• pp.773-782
• /
• 2004

The objective of this work was to establish an approaching method for TMR feeding system in the farm situation by testing the effects of herd-mix feeding system on the performance of lactating cows. Fifty six Holstein cows were fed for the experimental period of 16 months. Prior to test the herd-mix feeding system, animals were kept on conventional feeding system for 4 months, separate feeding of forage with concentrate, then provided 3 types of herd-mix rations formulated by mean level of energy concentration requirement of higher 1/2 ranker in each herd for remaining 12 months to compare the effect on milk yield performance of animals with conventional feeding system by using a switch-over method. The herd-mix feeding system influenced substantially upon the improvements of milk yield(P<0.01) and milk fat percentage(P<0.05). In all of lactational ages, milk yield and milk fat were enhanced by the herd-mix feeding system. Especially, actual milk yield(AMY) and milk fat in the 1st lactating cows, and AMY and 4.0% fat corrected milk yield(FCM) in the 2nd lactating cows were increased signiticantly by the herd-mix feeding system(P<0.05). In the early and mid-stage of lactation, the herd-mix feeding system showed higher AMY and FCM compared with the conventional feeding system although the milk fat was not different. AMY, milk fat and FCM in the late-stage of lactation were increased generally by the herd-mix feeding system. Especially, milk fat and FCM obtained by the herd-mix feeding system were significantly higher than those by the conventional feeding system(P<0.01). The herd-mix feeding system showed a good type of milking curve with a higher persistency of FCM(93.24%) than in conventional one(92.69%). The income over feed cost with the herd-mix feeding system was lA-fold higher than that with the conventional feeding method. In conclusion, the results of this work suggest that the herd-mix feeding system based on a correct level of energy concentration of TMR and well-determined feed ingredients increases not only milk yield of dairy herd by enhancing the performance of cows in early to mid stage of lactation with improved milk persistency but also gross income of dairy farm.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.448-454
• /
• 2021

This study was conducted to the effect of low air temperature and light intensity conditions on yield and quality of tomato at the early stage of growth in Korea. Inplastic greenhouses, low temperature and low temperature with shade treatments were performed from 17 to 42 days after plant. Tomato growing degree days were decreased 5.5% due to cold treatment during the treatment period. Light intensity decreased 74.7% of growing degree days due to shade. After commencing treatments, the plant growth decreased by low temperature and low radiation except for height. Analysis of the yield showed that the first harvest date was the same, but the yield of the control was 3.3 times higher than low temperature with shade treatment. The cumulative yields at 87 days after transplanting were 1734, 1131, and 854 g per plant for control, low temperature, and low temperature with shade, respectively. The sugar and acidity of tomatoes did not differ between treatment and harvesting season. To investigate the photosynthetic characteristics according to the treatment, the carbon dioxide reaction curve was analyzed using the biochemical model of the photosynthetic rate. The results showed that the maximum photosynthetic rate, J (electric transportation rate), TPU (triose phosphate utilization), and R_d (dark respiration rate) did not show any difference with temperature, but were reduced by shading. Vcmax (maximum carboxylation rate) was decreased depending on the low temperature and the shade. Results indicated that low temperature and light intensity at the early growth stage can be inhibited the growth in the early stage but this phenomenon might be recovered afterward. The yield was reduced by low temperature and low intensity and there was no difference in quality.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.25 no.1
• /
• pp.77-86
• /
• 1980

Asking to change the cropping patterns to save the labor and capitals in paddy rice cultivation, the study was intended to know the weed problems under the various possible cultural systems; namely, direct seeding (in broadcast and row), machine transplanting and hand transplanting. Under the conditions as weedy check plots, paddy yields were significantly variated among cropping systems, and the functions of panicle No. and spikelet No. to the yield were neglected, among others. However, the yield and yield components were narrowed among cropping systems, and the function of spikelets number per area was comparatively improved to the others.

• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.1
• /
• pp.29-34
• /
• 1974

On a newly reclamed acidic Song-jong soil (soil of a member of fine loamy, mesic family of Hapludults) an experiment was carried out to find out the proper measure of the improvement of soil fertility with soybean as test crop. Results are summarized as follow: 1. Application of compost (1 ton/10a), lime (lime requirement)and fused phosphate (equivalent to 5% of the phosphate fixation coefficient)resulted in the increase of soybean yield by 93.3% over the check plot (N: 6kg/10a, $P_2O_5$: 9kg/10a, $K_2O$: 6kg/10a). The application of fused phosphate at the level of 5% of phosphate fixation coefficient N (6kg/10a) and K(6kg/10a) brought the yield increase by 62.7% over the check plot. However, although the pH of the soil was adjusted to 7.0 by liming, the application of lime with moderate dose of phosphate ($P_2O_5$: 9kg/10a) did not increase the yield of soybean significantly. And the application of fused phosphate at the level of 5% of phosphate fixation coefficient increased the available soil P from 14 ppm to around 100 ppm as tested after harvest. 2. Application of compost (1 ton/10a) increased the organic matter content of soil by 0.8% when tested after harvest. While, the application of rice straw (0.5 ton/10a) did not alter the soil organic matter content. The CEC of the soil tested after havest found incereased significantly by the addition of lime and compost. 3. Plant analysis revealed that the $K_2O/Ca+Mg$ is better correlated with the yield than the absolute concentration of $K_2O$ in plant tissue. Between the concentration of $P_2O_5$ in plant tissue and the yield of soybean, a typical C-curve relationship was observed, indicating that in this particular soil, phosphate was the primary growth liming factor.