• 한국초지조사료학회지
• /
• 제4권1호
• /
• pp.28-34
• /
• 1983

alfalfa 단파초지(單播草地)에 있어서 최대총건물(最大總乾物) 생산(生産)과 질적(質的) 향상(向上)을 위한 예취적기(刈取適期)가 연구(硏究)되었다. 최대총생산수량(最大總生産收量)을 위한 예취기(刈取期) tc(장(張), 1971)가 alfalfa 초종(草種)의 영속성(永續性)과 동시에 CP 및 IVD의 높은 수준(水準)을 수분하는 최대건물생산수량(最大乾物生産收量)의 적기(適期)로 선택(選擇)되었다. 이와 동일(同一)한 이론적(理論的) 근거에 입각하여 극대(極大) LAI 및 25% 개화기(開花期)가 alfalfa 단파초지(單播草地)에서 가장 적합(適合)한 형태학적(形態學的) 예취기(刈取期)임이 판명(判明)되었다.

• 복합신소재구조학회 논문집
• /
• 제5권4호
• /
• pp.1-10
• /
• 2014

A progressive failure analysis procedure for composite laminates is developed in here and in the companion paper. An anisotropic plastic constitutive model for fiber-reinforced composite material, is developed, which is simple and efficient to be implemented into computer program for a predictive analysis procedure of composites. In current development of the constitutive model, an incremental elastic-plastic constitutive model is adopted to represent progressively the nonlinear material behavior of composite materials until a material failure is predicted. An anisotropic initial yield criterion is established that includes the effects of different yield strengths in each material direction, and between tension and compression. Anisotropic work-hardening model and subsequent yield surface are developed to describe material behavior beyond the initial yield under the general loading condition. The current model is implemented into a computer code, which is Predictive Analysis for Composite Structures (PACS), and is presented in the companion paper. The accuracy and efficiency of the anisotropic plastic constitutive model are verified by solving a number of various fiber-reinforced composite laminates with and without geometric discontinuity. The comparisons of the numerical results to the experimental and other numerical results available in the literature indicate the validity and efficiency of the developed model.

• Advances in Computational Design
• /
• 제9권1호
• /
• pp.39-52
• /
• 2024

If the governing differential equation arising from engineering problems is treated as an analytic, continuous and derivable function, it can be expanded by one point as a series of finite numbers. For the function to be zero for each value of its domain, the coefficients of each term of the same power must be zero. This results in a recursive relationship which, after applying the natural conditions or the boundary conditions, makes it possible to obtain the values of the derivatives of the function with acceptable accuracy. The elastoplastic analysis of an inhomogeneous thick sphere of metallic materials with linear variation of the modulus of elasticity, yield stress and Poisson's ratio as a function of radius subjected to internal pressure is presented. The Beltrami-Michell equation is established by combining equilibrium, compatibility and constitutive equations. Assuming axisymmetric conditions, the spherical coordinate parameters can be used as principal stress axes. Since there is no analytical solution, the natural boundary conditions are applied and the governing equations are solved using a proposed new method. The maximum effective stress of the von Mises yield criterion occurs at the inner surface; therefore, the negative sign of the linear yield stress gradation parameter should be considered to calculate the optimal yield pressure. The numerical examples are performed and the plots of the numerical results are presented. The validation of the numerical results is observed by modeling the elastoplastic heterogeneous thick sphere as a pressurized multilayer composite reservoir in Abaqus software. The subroutine USDFLD was additionally written to model the continuous gradation of the material.

• 대한기계학회논문집A
• /
• 제35권8호
• /
• pp.889-897
• /
• 2011

본 연구에서는 핵연료 지지격자체의 재료인 Zircaloy-4 와 Zirlo 판재의 이론적 성형한계 예측모델을 제시했다. 먼저 인장시험 및 이방성시험으로 응력-변형률곡선과 이방성계수를 획득했으며, NUMISHEET 96을 따르는 돔장출시험으로 두 재료의 실험적 성형한계도들을 얻었다. 이론적 성형한계도는 성형한계모델과 항복조건의 영향을 받는다. Swift 확산네킹이론, Marciniak-Kuczynski 의 재료결함 모델, Storen-Rice 의 정점이론을 이용해 부변형률이 양인 구간에서의 성형한계 곡선을 구했으며, 부변형률이 음인 구간에는 Hill 의 국부네킹 이론을 적용했다. 또한 재료이방성을 고려하기 위해 Hill 48, Hosford 79 항복조건을 사용 했다. Swift 확산네킹모델 (Hill 48 항복조건 적용)과 Hill 모델은 각각 변형률비가 양과 음인 영역에 대해 Zircaloy-4의 성형한계도를 비교적 정확히 예측하며, Zirlo의 성형한계도는 Hosford 79 항복조건 (a = 8)을 적용한 Storen-Rice 모델로 나타낼 수 있다.

• 한국농림기상학회지
• /
• 제16권4호
• /
• pp.274-284
• /
• 2014

농업은 기후 및 환경의 영향을 많이 받는 산업으로 기온, 강수량, 일조시간 등에 따라 재배 가능한 작물 과 품종이 결정된다. 본 연구의 목적은 사과의 생육과정에서 일별로 측정되는 기상변수를 활용하여 기상변수가 사과단수에 미치는 영향을 파악하는 것에 있다. 기상변수는 1) 생육단계를 고려한 자연과학적 접근방법과 2) 통계적 접근방법을 이용한다. 패널분석을 통해 추정된 각각의 결과를 모형적합도와 예측력 비교를 통해 평가한다. 사과단수와 기상변수의 자료는 2006년부터 2013년까지 우리나라 사과주산지 15개지역을 대상으로 수집되었다. 분석 결과, 통계적 접근방법 중요인분석을 이용한 변수 선정 방법이 가장 높은 예측력과 적합도를 보였다. 이는 기상변수와 같이 서로 유사하지만 다양한 설명변수의 사용으로 발생할 수 있는 다중공선성과 낮은 자유도의 문제를 효과적으로 통제하게 될 경우, 보다 많은 기상요인을 회귀분석에 포함하는 것이 적합도와 예측력을 높이는데 기여한 것으로 추정된다. 또한 사과재배에 있어 발아, 개화, 착과, 비대, 성숙, 그리고 착색 및 수확에 이르기까지의 전 생육과정의 기상요인이 단수에 영향력이 있음을 의미한다.

• Nuclear Engineering and Technology
• /
• 제29권2호
• /
• pp.138-147
• /
• 1997

Korean-made alloys 600 and 690 tubes were evaluated by flare tests according to ASTM standards, and acting stresses during the test ore analyzed. All the tubes, including alloys 600 and 690 tubes with various heat treatment conditions, satisfied the requirement with 30 or 35750.D expansion. Axial stresses in alloy 690 tubes were higher than those in alloy 600 ones and the gap increased gradually with flaring percentage(F.P, %). Assuming the tubes as the rigid-perfectly plastic body, a stress equation was obtained using modified Tresca's yield criterion. Also microstructural change of the flared tubes was discussed with the acting stresses.

• Structural Engineering and Mechanics
• /
• 제8권4호
• /
• pp.421-438
• /
• 1999

In this paper a practical limit load estimating procedure is proposed for general pipe-elbow structures subjected to complex loading (in-plane and out-of-plane bending, internal pressure and axial force). The explicit calculating formulae are presented on the basis of theoretical analysis combined with numerical simulation. Von Mises' yield criterion is adopted in both analytical and numerical calculation. The finite element examination shows that the method provides a simple but satisfactory prediction of pipe structures in engineering plastic analysis.

• Structural Engineering and Mechanics
• /
• 제26권4호
• /
• pp.393-408
• /
• 2007

The effects of material nonhomogeneity and nonisothermal conditions on the stress response of pressurized tubes are assessed by virtue of a computational model. The modulus of elasticity, the Poisson's ratio, the yield strength, and the coefficient of thermal expansion, are assumed to vary nonlinearly in the tube. A logarithmic temperature distribution within the tube is proposed. Under these conditions, it is shown that the stress states and the magnitudes of response variables are affected significantly by both the material nonhomogeneity and the existence of the radial temperature gradient.

• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2003년도 추계 학술발표회 논문집
• /
• pp.97-103
• /
• 2003

Shewhart-type control charts have historically been used for attribute data, though they have ARL biased property and even are unable to detect the improvement of a process with some process parameters. So far most efforts have been made to improve the performance of attribute control charts in terms of faster detection of special causes without increasing the rates of false alarm. In this paper, control limits are proposed that yield an ARL (nearly) unbiased chart for attributes. Optimal design is also proposed for attribute control charts under a natural sense of criterion.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 춘계학술대회 논문집
• /
• pp.45-50
• /
• 1999

The object of this study is structure analysis of vehicle air compressor. Structure analysis is compose to nodal solution and element solution using ANSYS code. Then analysis is partition to head part, cylinder and piston part of vehicle air compressor. Stress and strain results are satisfy to Von Mises yield criterion.