1 |
Perry, J. and Aboudi, J. (2003), 'Elasto-plastic stresses in thick walled cylinders', J. Pressure Vessel Technol. Transactions ASME, 125, 248-252
DOI
ScienceOn
|
2 |
Ugural, A.C. and Fenster, S.K. (1987), Advanced Strength and Applied Elasticity, 2nd. SI ed. Prentice Hall
|
3 |
Ma, L., Feng, X.Q., Gau, K.W. and Yu, S.W. (2003), 'Elastic and plastic analyses of functionally graded elements', Functionally Graded Materials VII Materials Science Forum, 423-4, 731-736
|
4 |
Nadai, A. (1931), Plasticity, Mc-Graw-Hill
|
5 |
Parker, A.P. (2001), 'Autofrettage of open-end tubes - Pressures, stresses, strains, and code comparisons', J. Pressure Vessel Technol. - Transactions of the ASME, 123, 271-281
DOI
ScienceOn
|
6 |
Timoshenko, S.P. (1956), Strength of Materials: Part II Advanced Theory and Problems, 3rd. ed. D. van Nostrand Company
|
7 |
Timoshenko, S.P. and Goodier, I.N. (1970), Theory of Elasticity, 3rd. ed. McGraw-Hill
|
8 |
Tutuncu, N. and Ozturk, M. (2001), 'Exact solutions for stresses in functionally graded pressure vessels', Composites: Part B, 32, 683-686
DOI
ScienceOn
|
9 |
Jabbari, M., Sohrabpour, S. and Eslami, M.R. (2002), 'Mechanical and thermal stresses in a functionally graded hollow cylinder due to radially symmetric loads', Int. J. Pressure Vessels Piping, 79,493-497
DOI
ScienceOn
|
10 |
Akis, T. and Eraslan, A.N. (2005), 'Yielding of long concentric tubes under radial pressure based on von Mises criterion (In Turkish)', J. Faculty Eng. Arch. of Gazi Univ., 20, 365-372
|
11 |
Boley, B.A. and Weiner, J.H. (1960), Theory of Thermal Stresses, Wiley, New York
|
12 |
Boresi, A.P., Schmidt, R.I. and Sidebottom, O.M. (1993), Advanced Mechanics of Materials, 5th. ed. Wiley
|
13 |
Eraslan, A.N. and Akis, T. (2004), 'Deformation analysis of elasto-plastic two layer tubes subject to pressure: An analytical approach', Turkish J. Eng. Envir. Sci., 28, 261-268
|
14 |
Eraslan, A.N. and Akis, T. (2005a), 'Elastoplastic response of a long functionally graded tube subjected to internal pressure', Turkish J. Eng. Envir. Sci., 29, 361-368
|
15 |
Eraslan, A.N. and Akis, T. (2005b), 'Yielding of two layer shrink-fitted composite tubes subject to radial pressure', Forschung im Ingenieurwesenl Eng. Res., 69, 187-196
DOI
|
16 |
Eraslan, A.N. and Akis, T. (2006), 'Plane strain analytical solutions for a functionally graded elastic-plastic pressurized tube', Int. J. Pressure Vessels Piping, 83, 635-644
DOI
ScienceOn
|
17 |
Horgan, C.O. and Chan, A.M. (1999), 'The pressurized hollow cylinder or disk problem for functionally graded isotropic linearly elastic materials', J. Elast., 55, 43-59
DOI
|
18 |
Mendelson, A. (1986), Plasticity: Theory and Application. MacMillan
|
19 |
Brown, P.N. and Hindmarsh, A.C. (1989), 'Reduced storage matrix methods in stiff ODE systems', Appl. Math. Comput., 31, 40-91
DOI
ScienceOn
|