• 한국산학기술학회논문지
• /
• 제16권9호
• /
• pp.6391-6396
• /
• 2015

2차원 응력조건에 대한 von Mises 항복기준의 특징을 살펴보기 위해 탄성변형률이 0이 되는 평면변형률 조건과 소성변형률증분이 0이 되는 평면변형률 조건을 고려해 보았다. 탄성변형률이 0인 평면변형률조건을 통해 얻은 항복함수와 평면응력조건에서의 항복함수는 기하학적으로 타원을 나타내는데 두 경우에 대한 기하하적 비교를 타원의 장, 단축의 길이비와 이심률의 비로 나타낼 때 단축비는 같았으나 장축비 및 이심률의 비는 포아송비의 함수로 표현되었다. 탄성변형률이 0인 평면변형률조건을 통해 얻은 von Mises 항복기준에 대하여 탄성거동을 보이는 영역은 포아송비가 커짐에 따라 넓어짐을 알 수 있었다. 소성변형률증분이 0인 평면변형률조건을 통해 관련유동법칙을 써서 항복함수를 구하였는데 기하하적으로 볼 때 평면응력조건에서의 항복함수가 타원임과는 달리 직선을 나타내었으며 평면응력조건일 때보다 탄성거동영역이 컸다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.19-26
• /
• 2002

In this paper, the nonlinear structural analysis for the composite structure of the spent nuclear fuel disposal container and the 50cm thick bentonite buffer is carried out to predict the collapse of the container while the sudden rock movement of 10cm is applied on the composite structure. This sudden rock movement is anticipated by the earthquake etc. at a deep underground. Horizontal symmetric rock movement is assumed in this structural analysis. Elastoplastic material model is adopted. Drucker-Prager yield criterion is used for the material yield prediction of the bentonite buffer and von-Mises yield criterion is used for the material yield prediction of the container(cast iron insert, copper outer shell and lid and bottom). Analysis results show that even though very large deformations occur beyond the yield point in the bentonite buffer, the container structure still endures elastic small strains and stresses below the yield strength. Hence, the 50cm thick bentonite buffer can protect the container safely against the 10cm sudden rock movement by earthquake etc.. Analysis results also show that bending deformations occur in the container structure due to the shear deformation of the bentonite buffer. The elastoplastic nonlinear structural analysis for the composite structure of the container and the bentonite buffer is performed using the finite element analysis code, NISA.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.17-20
• /
• 2000

Polymeric foams are excellent energy absorber and have found a wide range of applications especially in the automotive industry. The purpose of the present study is to develop experimental and theoretical methodology to characterize the pressure dependent yield behavior of polymeric foams. For the compression test in a triaxial stress sate a specially designed device was placed in a press machine to produce and control oil pressure. From the experiment results it was observed that the size of Mother circles is changed with mean normal stress in contrast to general metal. Then the Coulomb-Mohr criterion was applied to the data.

• Fibers and Polymers
• /
• 제7권1호
• /
• pp.42-50
• /
• 2006

In this paper, elasto-plastic constitutive equations for highly anisotropic and asymmetric materials are developed and their numerical implementation is presented. Some engineering materials such as fiber reinforced composites show different material behavior in the different material directions (anisotropy) as well as in tension and compression (asymmetry). Although these materials have mostly been analyzed using the anisotropic elastic constitutive equations, the necessity of consideration of plastic properties has been frequently reported in the previous works. In order to include both the anisotropic and asymmetric properties of composite materials, the Drucker-Prager yield criterion is modified by adding anisotropic parameters and initial components of translation. The implementation procedure for the developed theory and algorithms is presented based on the implicit finite element scheme. The measured data from the previous work are used to validate the present constitutive equations.

• Geomechanics and Engineering
• /
• 제13권4호
• /
• pp.585-600
• /
• 2017

This study deals with simple solutions for a spherical or circular opening excavated in elastic-brittle plastic rock mass compatible with a linear Mohr-Coulomb (M-C) or a nonlinear Hoek-Brown (H-B) yield criterion. Based on total strain approach, the closed-form solutions of stresses and displacement are derived simultaneously for circular and spherical openings using original H-B and M-C yield criteria. Two simple numerical procedures are proposed for the solution of generalized H-B and M-C yield criteria. Based on incremental approach, the similarity solution is derived for circular and spherical openings using generalized H-B and M-C yield criteria. The classical Runge-Kutta method is used to integrate the first-order ordinary differential equations. Using three data sets for M-C and H-B models, the results of the radial displacements, the spreading of the plastic radius with decreasing pressure, and the radial and circumferential stresses in the plastic region are compared. Excellent agreement among the solutions is obtained for all cases of spherical and circular openings. The importance of the use of proper initial values in the similarity solution is discussed.

• 한국산학기술학회논문지
• /
• 제17권7호
• /
• pp.529-535
• /
• 2016

이론적 연구를 통하여 정수압의 영향을 받는 항복기준인 Mohr-Coulomb 항복기준과 Drucker-Prager 항복기준의 강도정수를 ${\pi}$-평면에 대해 일치시킴으로써 강도정수간의 상관관계를 분석해 보았다. Drucker-Prager 강도정수 ${\alpha}$와 k를 Mohr-Coulomb 강도정수인 c와 ${\phi}$를 이용하여 표현하였는데 k는 c, ${\phi}$의 함수로 표현되었고 ${\alpha}$는 ${\phi}$만의 함수로 표현되었다. Drucker-Prager 강도정수 ${\alpha}$값은 흙의 내부마찰각이 커짐에 따라 증가함을 알 수 있었는데 Drucker-Prager 항복기준을 나타내는 원이 Mohr-Coulomb 항복기준에 외접 및 내접하는 경우의 ${\alpha}$값을 나타내는 ${\alpha}_c$와 ${\alpha}_i$값에 대하여 평균값인 ${\alpha}_{av}$의 값은 내부마찰각에 비례하였는데 내부마찰각이 $10^{\circ}$인 경우 약 0.07이었으며 내부마찰각이 $45^{\circ}$인 경우 약 0.29이었다. 또한, ${\alpha}_c/{\alpha}_i$값은 내부마찰각에 비례하였는데 내부마찰각이 $10^{\circ}$인 경우 약 1.12이었으며 내부마찰각이 $45^{\circ}$인 경우 약 1.62이었다. Mohr-Coulomb 강도정수가 Drucker-Prager 강도정수 k에 미치는 영향을 살펴보았는데 본 연구에서 가정한 흙의 점착력 중 최소값이 10kPa인 경우를 제외하고 흙의 내부마찰각의 영향을 거의 받지 않고 전체적으로 흙의 점착력에 영향을 받음을 알 수 있었다. 일정한 점착력에 대하여 내부마찰각이 증가함에 따라 일축압축시 및 일축인장시의 Mohr-Coulomb 항복기준에 의한 축차응력인 $S_{c0}$와 $S_{t0}$ 그리고 두 값의 평균값인 $S_{0(ave)}$값은 감소하였다. 또한 내부마찰각이 증가할수록 Mohr-Coulomb 항복궤적을 나타내는 육각형이 더욱 불규칙해져 $S_{0(ave)}$로부터 $S_{c0}$와 $S_{t0}$ 사이의 편차가 내부마찰각이 증가함에 따라 커짐을 알 수 있었다.

• Geomechanics and Engineering
• /
• 제32권1호
• /
• pp.49-68
• /
• 2023

The three-dimensional failure criterion is essential for maintaining wellbore stability and sand production problem. The convenient factor for a stable wellbore is mud weight and borehole orientation, i.e., mud window design and selection of borehole trajectory. This study proposes a new three-dimensional failure criterion with linear relation of three in-situ principal stresses. The number of failure criteria executed to understand the phenomenon of rock failure under in-situ stresses is the Mohr-Coulomb criterion, Hoek-Brown criterion, Mogi-Coulomb criterion, and many more. A new failure criterion is the extended Mohr-Coulomb failure criterion with the influence of intermediate principal stress (σ₂). The influence of intermediate principal stress is considered as a weighting of (σ₂) on the mean effective stress. The triaxial compression test data for eleven rock types are taken from the literature for calibration of material constant and validation of failure prediction. The predictions on rock samples using new criteria are the best fit with the triaxial compression test data points. Here, Drucker-Prager and the Mogi-Coulomb criterion are also implemented to predict the failure for eleven different rock types. It has been observed that the Drucker-Prager criterion gave over prediction of rock failure. On the contrary, the Mogi-Coulomb criterion gave an equally good prediction of rock failure as our proposed new 3D failure criterion. Based on the yield surface of a new 3D linear criterion it gave the safest prediction for the failure of the rock. A new linear failure criterion is recommended for the unique solution as a linear relation of the principal stresses rather than the dual solution by the Mogi-Coulomb criterion.

• Nuclear Engineering and Technology
• /
• 제44권7호
• /
• pp.791-798
• /
• 2012

Since standardized fracture test specimens cannot be easily extracted from in-service components, several alternative fracture toughness test methods have been proposed to characterize the deformation and fracture resistance of materials. One of the more promising alternatives is the local approach employing the SP(Small Punch) testing technique. However, this process has several limitations such as a lack of anisotropic yield potential and tediousness in the damage parameter calibration process. The present paper investigates estimation of ductile fracture resistance(J-R) curve by FE(Finite Element) analyses using an anisotropic damage model and enhanced calibration procedure. In this context, specific tensile tests to quantify plastic strain ratios were carried out and SP test data were obtained from the previous research. Also, damage parameters constituting the Gurson-Tvergaard-Needleman model in conjunction with Hill's 48 yield criterion were calibrated for a typical nuclear reactor material through a genetic algorithm. Finally, the J-R curve of a standard compact tension specimen was predicted by further detailed FE analyses employing the calibrated damage parameters. It showed a lower fracture resistance of the specimen material than that based on the isotropic yield criterion. Therefore, a more realistic J-R curve of a reactor material can be obtained effectively from the proposed methodology by taking into account a reduced load-carrying capacity due to anisotropy.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1117-1124
• /
• 2008

In This paper, load-settlement curves that obtained from 11 sites were analyzed. At all tests, the load is applied until apparent failure is observed. The validity of the ultimate and yield load estimation method and load calculated from the settlement criterion was investigated through comparison with the measured data. The result indicated that B. Hansen 80% criterion and Stability Plot in ultimate loading decision law almost have been regared as same by comparing measured date and ultimate bearing capacity decided in depending yield loading decision law from 13% to 46% difference have taeyaeen came out when measured data and Davisson was compared, and S-log t from 5% to 41% log P-log S from 14% to 50% difference have been came out. When Settlement standard and measured data was compared difference had been came out about 3% in total settlement 0.1D criterion and from 12% to 35% difference had been came out in net settlement.

• 터널과지하공간
• /
• 제15권3호
• /
• pp.228-235
• /
• 2005

Hoek-Brown의 파괴기준식으로부터 암반의 내부마찰각 및 점착강도를 계산한 후, Mohr-Coulomb의 항복함수를 이용하여 소성 보정이 적용될 수 있는 것으로 알려져 있다. 하지만 본 연구에서는 이러한 계산 과정이 연약 암반이나 낮은 봉압 조건의 암반에 대해서는 적합하지 않다는 사실을 보여주고자 한다. 즉, Hoek-Broun 재료 모델로부터 직접 및 간접적 적용에 의해 소성 보정을 수행하는 과정을 제시하였으며, 이를 통해 직접적 적용이 간접적 적용에 비해, 비선형 파괴면을 더욱 효과적으로 모사할 수 있고, 특히 봉압이 낮은 응력 조건에서 효과적임을 보여주고자 한다.