• 한국전자통신학회논문지
• /
• 제14권1호
• /
• pp.265-274
• /
• 2019

본 논문은 저가형 AHRS(: Attitude Heading Reference System)센서를 이용하여 무인 운송체(Unmanned vehicle)의 자세를 무향 칼만 필터 (Unscented Kalman filter)통해 추정하는 방법을 제안한다. 측정된 가속도와 지구자기장 값을 이용하여 UKF의 보정 단계에서 사용될 자세를 계산한다. 롤 (roll)과 피치 (pitch)는 가속도로부터 구해지며 요 (yaw)는 지구 자기장을 이용하여 연산한다. 이때 사용되는 지구자기장 측정값은 강철 효과(hard-iron effect)와 연철 효과(soft-iron effect)에 의해 쉽게 왜곡되기 때문에 계산된 요의 불확실성이 롤이나 피치의 불확실성에 비하여 크다. 본 논문은 이러한 불확실성을 줄이기 위하여 측정된 지구자기장에 포함된 편차성분을 추정하고 보정하여 더 정밀한 요값을 구한다. 제안된 방법을 수조에서의 무인 운송체 항법 실험을 통하여 검증하였다. 실험결과, 자세 추정 성능이 개선되고 이에 따라 위치 추정 성능도 개선됨을 확인하였다.

• 대한치과교정학회지
• /
• 제52권2호
• /
• pp.85-101
• /
• 2022

Objective: To classify facial asymmetry (FA) phenotypes in adult patients with skeletal Class III (C-III) malocclusion. Methods: A total of 120 C-III patients who underwent orthognathic surgery (OGS) and whose three-dimensional computed tomography images were taken one month prior to OGS were evaluated. Thirty hard tissue landmarks were identified. After measurement of 22 variables, including cant (°, mm), shift (mm), and yaw (°) of the maxilla, maxillary dentition (Max-dent), mandibular dentition, mandible, and mandibular border (Man-border) and differences in the frontal ramus angle (FRA, °) and ramus height (RH, mm), K-means cluster analysis was conducted using three variables (cant in the Max-dent [mm] and shift [mm] and yaw [°] in the Manborder). Statistical analyses were conducted to characterize the differences in the FA variables among the clusters. Results: The FA phenotypes were classified into five types: 1) non-asymmetry type (35.8%); 2) maxillary-cant type (14.2%; severe cant of the Max-dent, mild shift of the Man-border); 3) mandibular-shift and yaw type (16.7%; moderate shift and yaw of the Man-border, mild RH-difference); 4) complex type (9.2%; severe cant of the Max-dent, moderate cant, severe shift, and severe yaw of the Man-border, moderate differences in FRA and RH); and 5) maxillary reverse-cant type (24.2%; reverse-cant of the Max-dent). Strategic decompensation by pre-surgical orthodontic treatment and considerations for OGS planning were proposed according to the FA phenotypes. Conclusions: This FA phenotype classification may be an effective tool for differential diagnosis and surgical planning for Class III patients with FA.

• 기계와재료
• /
• 제23권3호
• /
• pp.182-189
• /
• 2011

전 세계적으로 대체에너지 개발이 활발해지면서 국내에서도 풍력발전에 대한 관심이 높아지고 있다. 풍력발전을 신재생에너지 중에서 가장 상업화에 앞서 있으며 급속한 시장 확대와 산업의 발전을 가져온 분야이다. 1990년대에 개발되어 설치 운용되고 있는 약 20만대의 0.5 MW ~ 3 MW급 중대형 풍력발전기가 세계 여러 곳에서 상업발전을 하고 있으며, 국내에서는 제주도 행원풍력발전단지에 1998년부터 2003년 4월까지 총 15기(약 203억 원 투입)의 풍력 발전기가 도입되어 세워져 있으며, 1998년 8월에 600kW 풍력발전기 1 2호기의 상업운전을 최초로 시작하였다. 최근 풍력발전기의 설치 환경이 육상에서 해상으로 변하면서 5MW급 초대형 풍력발전기의 상용화가 시도되고 있으며 수요 또한 급증하고 있다. 본고에서는 전량 수입에 의존하고 있는 풍력발전기의 핵심 부품인 Yaw system(yaw bearing & drive)의 국내외 시장 동향과 초대형 요 베어링 및 고 강성 유성기어 감속기의 특성을 분석하였으며, 특히 전략적 국산화 개발필요성을 강조하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.2055-2058
• /
• 2004

This paper formulates a yaw angle determination algorithm for earth-point satellite. The algorithm based on vector observation, is implemented with the limited vector measurements. The proposed algorithm doesn't require gyro measurement data but magnetic sensor measurement data. In order to confirm the usefulness of the proposed method, we investigate the simulated telemetry data of the KOMPSAT-2, a satellite that is scheduled to be launched into a 685km altitude sun synchronous circular orbit in 2005.

• 대한기계학회논문집B
• /
• 제24권1호
• /
• pp.85-92
• /
• 2000

Easy measurement method of orthogonal triple-sensor hot-wire anemometer is developed. Advantages of the new method is that it does not require either the exact orthogonality of the installed wires which cannot be kept during the probe manufacture and repair, nor the knowledge of the wire installation angles and the yaw and pitch coefficient of the wires. The new method introduced yaw and pitch calibration coefficients which are designed to increase monotonically with yaw and pitch angles. So the resulting calibration network is simple to recognize compared with that of the previously suggested calibration method. Verification experiments showed good accuracy and independency of the directional calibration on velocity.

• 한국전산유체공학회지
• /
• 제4권3호
• /
• pp.1-11
• /
• 1999

This paper describes the flow field analysis of an automobile with crosswind effects of 15°, 30° 45° and 60° of yaw angles. The governing equations of the 3-D incompressible Navier-Stokes equations are solved by the iterative time marching scheme. The Chimera grid technique has been applied to efficiently simulate the flow around the side-view mirror. The computated surface pressure coefficients have been compared with experimental results and a good agreement has been achieved. The A- and C-pillar vortex and other flow phenomena around the ground vehicle are evidently shown. The variation of aerodynamic coefficients of drag, lift, side force and moments with respect to yaw angle is systematically studied.

• International Journal of Automotive Technology
• /
• 제7권7호
• /
• pp.803-812
• /
• 2006

In order to reduce the negative effects of dynamic coupling among vehicle subsystems and improve the handling performance of vehicle under severe driving conditions, a vehicle chassis control integration approach based on a main-loop and servo-loop structure is proposed. In the main-loop, in order to achieve satisfactory longitudinal, lateral and yaw response, a sliding mode controller is used to calculate the desired longitudinal, lateral forces and yaw moment of the vehicle; and in the servo-loop, a nonlinear optimizing method is adopted to compute the optimal control inputs, i.e. wheel control torques and active steering angles, and thus distributes the forces and moment to four tire/road contact patches. Simulation results indicate that significant improvement in vehicle handling and stability can be expected from the proposed chassis control integration.

• 한국정밀공학회지
• /
• 제19권11호
• /
• pp.65-74
• /
• 2002

This paper examines the usefulness of a Brake Steer System (BSS), which uses differential brake forces for steering intervention in the context of Intelligent Transportation Systems (ITS). In order to help the car to turn, a yaw moment can be achieved by altering the left/right and front/rear brake distribution. This resulting yaw moment on the vehicle affects lateral position thereby providing a limited steering function. The steering function achieved through BSS can then be used to control lateral position in an unintended road departure system. A 8-DOF nonlinear vehicle model including STI tire model will be validated using the equations of motion of the vehicle. Then a controller will be developed. This controller, which will be a PID controller tuned by Ziegler-Nichols, will be designed to explore BSS feasibility by modifying the brake distribution through the control of the yaw rate of the vehicle.

• 전기학회논문지
• /
• 제59권12호
• /
• pp.2292-2297
• /
• 2010

To improve the performances of Sawyer motors and to regulate yaw rotation, various feedback control methods have been developed. Almost all of these methods require information on the position, velocity or full state of the motor. Therefore, in this paper, a nonlinear observer is designed to estimate the full state of the four forcers in a Sawyer motor. The proposed method estimates the full state using only positional feedback. Generally, Sawyer motors are operated within a yaw magnitude of several degrees; outside of this range, Sawyer motors step out. Therefore, this observer design assumes that the yaw is within ${\pm}90^\b{o}$. The convergence of the estimation error is proven using the Lyapunov method. The proposed observer guarantees that the estimation error globally exponentially converges to zero for all arbitrary initial conditions. Furthermore, since the proposed observer does not require any transformation, it may result in a reduction in the commutation delay. The simulation results show the performance of the proposed observer.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1126-1131
• /
• 2007

This paper presents unified chassis control (UCC) to improve the vehicle lateral stability. The unified chassis control implies combined control of active front steering (AFS), electronic stability control (ESC) and continuous damping control (CDC). A direct yaw moment controller based on a 2-D bicycle model is designed by using sliding mode control law. A direct roll moment controller based on a 2-D roll model is designed. The computed direct yaw moment and the direct roll moment are generated by AFS, ESP and CDC control modules respectively. A control authority of the AFS and the ESC is determined by tire slip angle. Computer simulation is conducted to evaluate the proposed integrated chassis controller by using the Matlab, simulink and the validated vehicle simulator. From the simulation results, it is shown that the proposed unified chassis control can provide with improved performance over the modular chassis control.